Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) used for sale (257)

Offer 26294 Technical data: - Center width 3000 mm - Largest rotation – Ø over bed 630 mm - via face slide 340 mm - in the bed offset 880 mm - Spindle bore 73.5 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 200 mm - Spindle speeds 10 - 1000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Diametrical Pitsch thread - Drive 400 V / 9 kW - Chip tray with coolant device - 3+4 jaw chuck with jaws, quick-change steel holder, etc. - Bezel - Space requirement approx. W 5500 x H 1600 x D 1800 mm - Weight approx. 3600 kg

The machine is equipped with a tailstock, a Multifix tool post, and a quick-action chuck, including a 3-axis digital readout system manufactured by FAGOR.

KNUTH Basic Plus L&Z Lathe /Year 2011 -Tip height 150mm -Max turning diameter 300mm -Max turning diameter over support 178mm -Max. turning diameter without bridge 430mm -Tip width: 810 mm -Spindle bore: Ø 38 mm -Spindle speed: 60–1,550 rpm, 9 steps -Automatic longitudinal/plane feeds -Spindle mount: Camlock D1-4" -Tailstock cone: MK 3 -Quill stroke: 100 mm -Bed width: 180 mm -3-axis digital display -Multifix quick-change holder with insert -Electric lining protection -Work light -Rotating center punch tip -3-jaw chuck -2x bezels -Documentation Dimensions: LxWxH 1.6x0.7x1.2 meters / Weight 520Kg

Maximum diameter above bed: 300 mmDiameter above slide: 150 mmTip height: 150 mmSpacing between needles: 500 mmSpindle bore: 30 mmSpindle inner cone: CM5Bed width: approx. 270 mmTailstock sleeve stroke: 115 mmBarrel diameter: 50 mmSpindle speeds: up to 2,500 rpm depending on configurationMotor: 2.2 kWTurret: square / Preciblock Auction-ID: A1-50714-4091

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm / Stepless speed adjustment -Coolant pump -Lining protection -Three-jaw chuck -Quick-change holder Multifix & insert -Documentation Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

General Description Universal horizontal centre lathe manufactured by TOS, model E3N. Designed for precision turning, facing, boring, drilling and threading of cylindrical metal workpieces in toolrooms, maintenance workshops and general machining applications. Technical Details Manufacturer: TOS Model: E3N Machine type: Universal horizontal centre lathe 3-jaw self-centering chuck installed Tailstock Four-way toolpost Leadscrew Quick-change threading gearbox Flexible coolant nozzle Condition Used industrial condition. The machine appears complete with chuck, tailstock, four-way toolpost, leadscrew, quick-change gearbox and coolant system. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-33

Key data: 280 mm, 365 mm, 2240 U/min

Circulation over bed 560 mm Wire diameter over carriage 365 mm Turning length 2000 mm Spindle head DIN 55027 Front bearing 100 mm Spindle bore 62 mm Spindle speed 11.2 - 2240 rpm Spindle motor 15 KW Face slide travel 345 mm Upper slide travel 125 mm Bed widthw 360 mm Quill cone i. tailstock 5 MK Quill diameter 80 mm Quill stroke 190 mm Thread pitches 0.125 - 112 mm Machine weight 4500 KG Dimensions 3.5 x 2.0 x 2.2 m 3-axis digital display 3-jaw chuck 1 roller bezel MULTIFIX steel holder Sleigh rush walk Equipment for Metric, Inch, Module & Diametrical Pitch Threads Geometric overhaul in 2023, little used, excellent condition!

With 3 claw, 4 claw, tool holders, machine feet Auction-ID: A1-50076-1001

Key data: 205 mm, 410 mm

1 gebr. LZS Lathe, TOS SN40B x 1000 mm Technical data (TOS SN 40 B) Center width: approx. 1,000 mm Center height: approx. 205 mm Circumferential diameter over bed: approx. 420 mm (hence the designation "SN 40") Circumferential diameter over flat lower saddle: approx. 225 mm Circumferential diameter in the offset: approx. 600 mm (if equipped with removable bridge) Bed width: approx. 400 mm ⚙️ Spindle & Feeds Spindle bore: approx. 52 mm (ideal for common rod diameters) Spindle mount: DIN 55027 Gr. 6 (with bayonet lock) Speed range: Steps graded, usually from approx. 11 to 2,240 rpm (in several steps via gearbox) Power of the main motor: approx. 6.6 kW (powerful industrial drive) Dimensions & Weight Machine weight: approx. 1,800 kg to 2,100 kg (depending on tip width) Space requirement (L x W x H): approx. 2,500 x 1,000 x 1,350 mm (with 1,000 ...

already disassembled, including cabinet with accessories Auction-ID: A1-50076-5

Turning diameter over face slide: 200 mm Spindle bore: 32 mm Circumferential diameter over bed slide: 315 mm Tip width: 600 mm Turning length: 560 mm Quill stroke: 140 mm Total weight: 1,750 kg Digital display Heidenhain Collet System E163

Already disassembled Auction-ID: A1-50076-6

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Already disassembled Auction-ID: A1-50076-10

WEILER COMMODOR L&Z lathe from school operation -Turning length 1000mm -Turning diameter max. 180mm Bar Passage 56mm -Speed range 56-2000 rpm (gearbox) -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 -Three-jaw chuck approx. 200mm -Multifix base holder with insert -Tailstock MK 4 -Coolant device -Electric lining protection -Work light -Swarf back wall -Guide and pull spindle cover -2x Emergency / Off -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Spindle Passage 120 mm Three jaws, chuck fork type 250mm Multi ix Type B Tapping device Electrical feed in upper support Tailstock Quill Stroke 200mm The machine was electrically and mechanically overhauled and equipped with an emergency switch and spindle chip protection The machine has run for 5572 hours since then Accessories: Once closed Lynette Two center number carriers Auction-ID: A1-50529-7

Lg.Nr. 26208 Technical data: - Center height 120 mm - Center width 450 mm - Largest circulation – Ø over bed 250 mm - Spindle bore 23 mm - Spindle mount with threaded nose DIN 55027 - Mounting cone of the tailstock quill MK 2 - 20 spindle speeds 60 - 3000 rpm - Feeds - longitudinal 0.03 - 3.0 mm - Flat 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Space requirement approx. W 1200 x H 1250 x D 650 mm - Weight approx. 700 kg - with: - 3-jaw chuck, - Quick-change steel holder - Moving grain tips - Separate tool cabinet with various accessories

Guide and tension spindle lathe- Digital display- 3-jaw chuck 160- Spare jaws- Coolant system- Multifix steel holder- 4 pcs. Multifix holder- Steady rest- Moving center punch- Chip pan- Chuck protectionTurning diameter over bed 350 mmTurning diameter over support 216 mmTurning length 1000 mmTurning diameter in the offset 550 mmSpeed 40 - 1800 rpmCenter height 170 mmSpindle bore 40 mmTotal power requirement 4.0 KWMachine weight approx. 0.7 tSpace requirement approx. 2.0 x 0.85 x 1.6 m Auction-ID: A7-50523-811

Key data: 140 mm

A Weiler Matador lathe is being sold. Machine comes from an inclusion workshop and has been regularly serviced. Prris is net plus VAT Loading facilities available. Article location Nuremberg

Lead and pull spindle lathe- 3-jaw chuck 200mm- Quick-change steel holder- Bezel- Machine light- Chip tray- Center punch tipTurning diameter over bed 480 mmTurning diameter over support 260 mmTurning length 1500 mmTurning diameter in the offset - mmSpeed 90 - 1120 rpmCenter height 240 mmSpindle bore 52 mmTotal power requirement 7.5 KWMachine weight approx. 2.3 tDimensions approx. 3.0 x 1.3 x 1.5 m Auction-ID: A7-50523-734

Key data: 510 mm, 1500 mm, 300 U/min

Hello, I get this lathe at the beginning of August. With a lot of accessories: steady rest, lathe chuck – clamping jaws, quick-change holder and.. Heidenreich & Harbeck Type Hanseat 480 Year of manufacture 1980 Center height 255 mm Turning diameter over support 300 mm Center width 1500 mm 24 speeds from 23.6 to 2500 n1/min Tailstock MK 4 Chuck F 250 Motor 380 Volt 11 kW Transport dimensions: Length 3200 mm Width 1200 mm Height 1550 mm Weight 2.5 to. Lathe Hanseat 480 incl. accessories St Description 1 instruction manual 1 Lynette small 1 Lynette large 1 4- Jaw chuck small 1 4- Jaw chuck large 15 quick-change tool holders Set designation 2 jaws for 4-jaw chuck 38 jaws for 3-jaw chuck

As well as wall-mounted tool grinder Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-596

Offer 26143 Technical data: - Tip height 165 mm - Center width 750 mm - Turning diameter over bed 330 mm - Turning diameter via face slide 170 mm - Spindle bore 42 mm - Pick-up cone of the tailstock quill MK 3 - Travel of the tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V / 1.5 / 2.8 kW - with: - 2 pieces 3 jaw chucks - Bezel - 4 pieces SWS steel holder - Div. Drehmeisel - Space requirement approx. W 1800 x H 1150 x D 900 mm - Weight approx. 800 kg

• centre length: 1000 mm• centre height over bed: approx. 250 mm• centre height over support: 150 mm• Incl. steady rest.

Key data: 410 mm, 800 mm

TECHNICAL DATA Lathe Weisser Heilbronn Model No.: SENIOR Y.O.M. 1984 Centerheight 410 mm Swing over bed 810 mm Swing over Support 564 mm Spindle bore 105 mm max Workpieceweight between chuck and Pinole 22 tons Spindlerevolotions 8 -- 1250 Rev/min Main motor 15 kW Rapid traverse longitudinal 4 Jaw chuck 700 mm Moving Protection for guideaways longitudinal Digital Read Out 1 Steady Rest 0 - 130 mm Quick change Toolpost with inserts Coolant

The machine is equipped with a tailstock, a Multifix clamping system and a 3-jaw chuck, diameter: 300 mm, incl. two steady rests.Year of Manufacturing: presumable 2018

Optimum Lathe D330 x 1000 SG -Center width: 1000 mm -Circumferential diameter over bed: 330 mm -Circumferential diameter over support: approx. 190–200 mm -Spindle bore: approx. 38 mm -Spindle mount: Camlock (mostly D1-4) -Speed range: approx. 70 – 2000 rpm (stepped) -Feeds: longitudinal and flat, automatic -Threading: metric and imperial possible -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock mount: MK3 - Spindle holder: MK5 -Work light -Three-jaw chuck -13x Face Plates/Drive Plates -Multifix with 1 steel holder -Machine feet -Lining protection Dimensions: LxWxH 1.9x0.7x1.5 meters / Weight 700Kg

The machine is equipped with a tool holder, a tailstock, and a 3-jaw chuck, diameter: approx. 310 mm.• centre distance over bed: 300 mm• centre distance over support: 200 mm

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder rotary flash -4 lathe chisel holders Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

The machine is equipped with a tailstock, a Multifix clamping system and a 3-jaw chuck, diameter: 300 mm, incl. two steady rests.Year of manufacturing: presumable 2018

GALLIC 16 N lead and pull spindle lathe with ACU-Rite digital display - Turning diameter over support 200mm - Turning diameter over bed 320mm - Tip height 160mm - Center width 1000mm - Speed range 45-2500 rpm - Spindle bore 40mm - Automatic feeds X/Z axis -Spindle bore approx. 42mm -Quick-change holder -Thread/Metric/Inch etc. -Tailstock MK 4 -Electric lining protection -Three-jaw chuck -Swarf back wall LxWxH 2.4x1x1.7 meters / Weight 1600Kg

Includes a 3-jaw chuck, jaw width: 250 mm, tailstock, Multifix basic holder as well as a 3-axis digital readout and a workbench with matching Multifix tool holders and two jaw chucks, indexable inserts, collets, and milling cutters.Additional technical specifications:• Center height over bed: 200 mm• Center height over support: approx. 110 mm• Center height over cross support: approx. 90 mm

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

Operating voltage: 380 VFrequency: 50 HzControl voltage: 220 VRated current: 20 ATip length: 1000 mmCenter height above bed: 250 mmTurning diameter over bed: 500 mmCenter height over support: 150 mmTurning diameter over support: approx. 300 mmSpindle passage: approx. 58 mmThe machine is equipped with a tailstock, a Multifix turning steel holder and a three-jaw chuck FORKARDT, diameter: 200 mmalso a two-axis digital display from the manufacturer HEIDENHAINSpeed: up to 2500 rpm Auction-ID: A7-49089-410

WEILER LZ330 / From educational institution incl. new 3-axis digital display -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg

The machine is equipped with a tailstock, a Multifix tool holder, and a digital readout from the manufacturer ACU-RITE. The machine comes from a training workshop, therefore the lead and feed screw are covered.Additional technical specifications:• Center height over cross slide: 90 mm• Center length: approx. 900 mm• Center height over bed: 170 mm

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

Dreh-Øüber Bett: 400 mmDreh-Øüber Support: 220 mmturning length: 1000 mmspindle turning speed range: 12,5 - 2000 U/minspindle taper: Bajonett 55022 spindle bore: 47 mmfeeds - longitudinal: 0,07 - 4,16 mm/Ufeeds - cross: 0.035 - 2,08 mm/Uthread - mm pitch: 0,87 - 192 mmthread - inch: 2 - 24 Gang/ inch.rapid travel - longitudinal/face: 3,4 / 1,7 m/minspindle drive: 11 kWpower capacity: 13 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 2,8 x 1,2 x 1,5 m• 3-jaw chuck Ø 250 mm,• 4-jaw chuck Ø 200 mm,• 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Guide & Tension Spindle Lathe GEMA LZ 200 -Three - Axis Digital Display "NEW" -Guided tours " VERY GOOD" -Tip height 200 mm -Center width 1000 mm -Turning diameter over bed 400mm -Turning diameter over support 200mm -Spindle passage 54 mm -Automatic longitudinal/plane feeds -Speed range 36-2200 rpm -Tailstock MK 4- Adjustment 200mm -Three-jaw chuck 250mm -Electric lining protection -Multifix with inserts -Coolant device -Work light -Machine feet -Chip tray Dimensions: LxWxH 2x1.2x1.6 meters / Weight 1800Kg

: gebraucht : 2001 : 010191 : prompt, Zwischenverkauf v : Deutschland : 22100 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 80 - 2 Gänge/: 0.2 - 4 : 200 - 5 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 720 kgHeidenhain 3-axis digital readoutNEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with collets from 3 to 30,5 mmLive centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in German with CE declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and funct ...

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 17900 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 0.2 - 4 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 680 kgHeidenhain 3-axis digital readoutNEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with various collets from 1 to 27 mmLive centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in GermanBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live te ...

Leit & Pull Spindle Lathe "DREHMA - D410x1500mm -Demonstration machine - year 2025 -CE - Identifier -Digital display -Turning diameter over bed 410mm -Turning length 1500mm -Turning diameter over support 255mm -Turning diameter in the offset 580mm -Spindle Passage 52mm -Speed range 45-1800 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric etc. -Tailstock Mk4 -Central lubrication -Drive power 3.5 KW -Fixed / Rotating bezel -Multifix holder with 4x inserts -Three-jaw chuck 200mm Hsbknowatv Ss Au S Tel -Four-jaw chuck 250mm -Face Plate -Lining protection -Front safety device -Coolant device -Work light -Running tip -Machine feet Dimensions: LxWxH 2.5x1x1.6 meters / Weight 1800Kg

Conventional lead and draw spindle lathe from German manufacturer Heidenreich & Harbeck (VDF), Hamburg. The machine is equipped with a Multifix quick-change holder (type B) and comes with a wide range of accessories, including a tool cabinet and turning holder package.Electrical:Operating voltage: 380 VControl current: 220 VFrequency: 50 HzTotal current: approx. 4 AEquipment:Multifix quick-change holder type BSeveral turning holders and drill holdersForkardt 3-jaw chuck Ø200 mmtool equipmentTool cabinetClassic VDF feed and thread cutting gear

Weiler Commodor B incl. 3 - axle digital display /Heidenhain - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Three-jaw chuck - Feed protection - 2x Emergency / Off - Swarf back wall - Multifix with inserts -Machine feet - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 50210 €: 863.32 €: 1 : 45200 €: 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 21 : 20 - 2000 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 7.5 kW: 3600 mm: 1250 mm: 1400 mm: 3110 kgdriven by conventional gearbox3-axes digital readout Fagor 40iquick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round)3-jaw chuck Bison3204/DIN6350, Ø 250 mmspindle dead centerfour way rapid traverse deviceelectromagnetic brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS ...

Hamlet of Commodor B -GS - Identifier -3 - Axis digital display "NEW" - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection -2x Emergency / Off -Swarf back wall -Coolant device - Work light - Multifix with inserts -Documentation

turning diameter over bed: 280 mmturning diameter over slide rest: 150 mmturning length: 500 mmcenter height over bed: 140 mmcentre distance: 500 mmbed width: 205 mmspindle bore: 40 mmturning speed range - stepless: 30 - 4.000 U/min3-jaw-chuck diameter: 140 mmquick change toolholder: MULTIFIX Typ Adrive capacity - spindle motor: 4,0 kWtaper in tailstock-quill: MK 3 dia. of quill: 40 mmquill stroke: 85 mmvoltage: 400 Vtotal power requirement: 7,5 kWweight of the machine ca.: 800 kgdimensions of the machine ca.: 1,40 x 0,95 x 1,55 m- Serial-No.: 154- SIEMENS 3-axis digital display- MULTIFIX quick-change tool holder- rotating centering tipThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

turning diameter over bed: 280 mmturning diameter over slide rest: 170 mmturning length: 650 mmcenter height over bed: 140 mmcentre distance: 650 mmbed width: 155 mmspindle taper: KK 4 CAMLOCK DIN 55029spindle bore: 40 mmturning speed range - stepless: 4.000 U/min4-jaw-chuck diameter: 140 mmquick change toolholder: MULTIFIX Typ Adrive capacity - spindle motor: 7,5 kWtaper in tailstock-quill: MK 2 dia. of quill: 30 mmquill stroke: 80 mmvoltage: 400 Vtotal power requirement: 7,5 kWweight of the machine ca.: 400 kgdimensions of the machine ca.: 1,30 x 0,70 x 1,60 m- Serial-No.: C7D W13 02- 3-axis digital display- Stepless speed adjustment- Digital speed display- MULTIFIX quick-change tool holderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.