used Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) for sale

Description: With accessories cabinet, contents steel holder, twist drill, turning steel holderDrehlänge: 500 mm, turning diameter over bed: 300 mm, turning diameter over slide: 170 mm, turning speed range: 48 bis 2500 rpm, weight approx.: 550 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 900 x 1,500 mm

Article number: 04-03-218 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1993 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories  3-axis digital display SINO New  3-jaw chuck 160mm New  Quick Release Holder Size A +  ...

Article number: 04-03-220 Manufacturer: Weiler Very good general condition Machine partially overhauled Shipping time: All rights reserved. Year of construction: ca.1998 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories  3-jaw chuck 160mm New  Quick Release Holder Size A + 1 Insert  Bed stop  Work Light New  Coolant Device New  Complete documentation  N ...

Beautiful hamlet intern 160. Centre distance 650 mm Center height 160 mm Turning diameter over bed 320 mm Spindle bore 40 mm Spindle speeds 24-2500 rpm Accessories: Digital display Heidenhain 3 axes 3-claw 160mm Multifix tool holder with 5 holders Collet Equipment Collets 27 pieces

Article number: 04-03-226 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1994 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories  3-axis digital display SINO New  3-jaw chuck 160mm New  Quick Release Holder Size A +  ...

turning diameter over bed: 300 mmturning diameter over slide rest: 150 mmturning length: 800 mmspindle bore: 36 mmturning speed range: 42 - 2000 U/minfeeds: 0,011 - 0,91 mm/Utailstock quill taper MT: 3 total power requirement: 2,2 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 1,7 x 0,8 x 2,0 mMachine had been active in the school centre very little used!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 160 mm

Year of construction: 2003 Top height: 160mm Center width: 650mm Spindle bore: Ø 40mm Circulation over bed 320 mm Spindle speed: 20-2500 Tailstock mount: MK3 Quill Stroke: 85mm Quill diameter 40 mm Longitudinal carriage feed range: 0.020 - 0.630 mm/rev Feed range face slide: 0.006 - 0.200mm/rev Possible thread types: Metric, Inch, Modulus, Diametrical Pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Main motor 3.5 kW Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 710kg Accessories as shown in the pictures: 3-axis digital display, coolant device, chuck protection, 4-jaw chuck, punch pliers and other collet equipment incl. Collets, Multifix with 2 inserts, manuals.

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

turning diameter over bed: 650 mmturning diameter over slide rest: 440 mmturning length: 7000 mmcentre height: 330 mmcentre distance: 7000 mmspindle bore: 61 mmøspindle turning speed range: 8 - 800 U/mintotal power requirement: kWweight of the machine ca.: 5,9 tdimensions of machine L x W x H: 8,75 x 1,35 x 1,48 mAccessories: face plate 450 mmø, 4-pos. tool holder, running center, coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 720 mmturning diameter over slide rest: 500 mmturning length: 1000 mmspindle turning speed range: 7.1 - 1800 U/minfeeds - fine adjustment: 6 - 6,28 mm/Ufeeds crossrail-slide horizontal: 0,005 - 6,28 mm/Uspindle drive: 15 kWcentre height: 360 mmspindle bore: 82 mmtotal power requirement: 28 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,8 x 1,4 x 1,8 m3-jaw chuck: 315 mmQick Toolholders: Multifix GR. 8 Digital Read Out: Acu-Rite Face plate: 600 mmmotorized top slide: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 950 mmturning diameter over slide rest: 569 mmturning length: 2200 mmspindle bore: 90 mmfaceplate: 800 mmsteady: 500 bed width: 580 mmRapid travel: turning speeds: 800 U/mindigital readout: stepless reg. with elect. turning speeds: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 6,5x2x1,8 mChip conveyor can be purchased as an option for €7,500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 480 mmswing diameter over bed slide: 300 mmturning length: 1500 mmcentre height: 240 mmcentre distance: 1500 mmspindle bore: 42 mmspindle turning speed range: 14 - 1400 U/mintotal power requirement: kWweight of the machine ca.: 2,4 tdimensions of machine L x W x H: 3,00 x 1,05 x 1,40 mAccessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running centerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 440 mmturning diameter over slide rest: 250 mmturning length: 1000 mmspindle bore: 62 mmspindle speed:: 124 - 1400 tailstock quill taper MT: 4 quill stroke: 160 mmmetrical thread cutting: 0,5 - 112 mm/Uthread - inch: 1/4 - 56 inch.total power requirement: 7,5 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 2,6 x 1,1 x 1,50 mQick Toolholders: Face plate: 3-jaw-chuck diameter: 3-jaw-chuck diameter: Weipert precision guide and spindle lathe WG 425The machine comes from a training company and has been maintained more thansecond hand.The general condition is very good, all functions have been checked.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: SPECIFICATIONS Character: White Heilbronn Type: Gigant Distance between centers: 2,500 mm Height between centers: 530 mm Turning diameter above the bed: ø1,060 mm Turning diameter above the base: ø700 mm Door outlet: ø102 mm Specs 3-claw chuck 4-jaw chuck Brand 4-claw: Forkardt PSA900weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,300 x 2,100 mm

Article number: 04-03-110 Manufacturer: Weisser Heilbronn Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1989 L x W x H: approx. 3500x1000x1700mm Weight: approx. 3500kg Digital display: 2-axis digital display Heidenhain Dimensions: Max. turning diameter over bed: approx. Ø425mm Max. turning diameter via support: approx. Ø240mm Max.turning length: approx. 2000mm Rod passage: approx. Ø58mm Spindle: Speed range: approx. 28-2500 rpm Spindle nose: A 2-5 Drive power: approx. 5.5kW Tailstock: MK4 Accessories  3 – jaws – chuck Schunk Ø 250 mm  Quick-release steel bracket + 4 inserts  Electric feed protection  Work light  Complete machine documentation  NOT – Off  Various tension wrenches  Coolant device  L+Z spindle cover  Machine feet  Various turning steels � ...

turning diameter over bed: 500 mmturning diameter over slide rest: 250 mmturning length: 1200 mmturning diameter in the gap: mmturning speeds: 7,1 - 1400 U/mincentre height: 250 mmspindle bore: 49 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3,9 tdimensions of the machine ca.: 2,85 x 1,3 x 1,6 mLead and feed spindle lathe- 3-jaw chuck 260mm- 4-fold steel holder- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Turning diameter over bed: approx. 280 mm Turning diameter over support: approx. 140 mm Center width: approx. 400 mm Spindle bore: approx. 27 mm Speed range: 100 - 2000 rpm With drilling unit installed on the lathe (see pictures) Internal size designation of the lathe: 260 x 500weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,600 mm

Specifications: Center height: 220 mm Center width: 1000 mm Spindle bore: 55 mm Bed width: 430 mm Speeds, 2 stages: 18 - 1800 1/min Tailstock mount: MK 4 Quill stroke: 190 mm Feed rate: 0.30 - 3.26 mm/rev Dimensions (WxDxH), approx.: 2650 x 1100 x 1550 mm Equipment: - Quick-change holder System Multifix - Bed stop - Coolant device -Mudguard - Turning chuck protection with restart protection

Key data: 250 mm, 500 mm

Circulation diameter over bed 500 mm Max. turning length 1,600 mm Connected load 5.5 kW Machine weight 4.4 t

Description: Center lathe - Rapid traverse - Faceplate 400mm - Multifix steel holder - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Machine light Turning diameter over bed 400 mm Turning diameter over support 200 mm Turning length 1500 mm Speed 28 - 1400 rpm Center height 200 mm Spindle bore 50 mm Total power requirement 10.4 kW Machine weight approx. 2.85 t Space requirement approx. 3.5 x 1.4 x 1.6 mweight approx.: 2,850 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,400 x 1,600 mm

turning diameter over bed: 400 mmturning diameter over slide rest: 200 mmturning length: 1500 mmturning diameter in the gap: mmturning speeds: 28 - 1400 U/mincentre height: 200 mmspindle bore: 50 mmtotal power requirement: 10,4 kWweight of the machine ca.: 2,85 tdimensions of the machine ca.: 3,5 x 1,4 x 1,6 mCenter lathe- Rapid traverse- Faceplate 400mm- Multifix steel holder- Coolant system- Feed protection- chip trays- Chip protection wall- Emergency stop facility- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over slide rest: 760 mmturning length: 2500 mmspindle bore: 104 mmturning speeds: 3,55-710 U/minfaceplate: 1000 mmsteady: turning dia. in gap: 1345 mmlength of gap: 400 mmworkpiece weight: 10000 kgtotal power requirement: kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1020 mmturning diameter over slide rest: 680 mmturning length: 3100 mmspindle bore: 108 mmfaceplate: 1000 mmsteady: 500 bed width: 570 mmRapid travel: turning speeds: 4,5-900 U/mindigital readout: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 6,5x2x1,8 mChip conveyor can be purchased as an option for €7,500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mmturning diameter over slide rest: 650 mmturning length: 3500 mmspindle bore: 108 mmfaceplate: 1000 mmsteady: 500 Control: Siemens type: 840 D bed width: 750 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 6,5x2x1,8 mChip conveyor can be purchased as an option for €7,500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1000 mmturning diameter over slide rest: 760 mmturning length: 5000 mmspindle bore: 82 mmturning speeds: 3,55-710 U/minfaceplate: 1000 mm3-jaw chuck: 500 mmsteady: 2 total power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Fabrication number 20454  , including: 3-jaw chuck steady rest , tailstock , existing documentation Drehlänge: 1,500 mm, turning diameter over bed: 500 mm, turning diameter over slide: 300 mm, spindle bore: 62 mm, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,000 x 1,400 mm

Key data: 417 , 830

Lathe in excellent condition, mechanically like new. Technical data: - Centres height: 417 mm - Distance between the centres: 2000 mm - Spindle hole 113mm - Bench width: 560 mm - Turning diameter on the bench: 830 mm - Turning diameter on the deep hole: 510 mm - Visualization by DRO Available for immediate delivery. Machine in excellent condition, like new!

Description: Spindle speed: 16 - 2000 rpm Center length: approx. 1600 mm Center height above bed: approx. 300 mm Turning diameter above bed: approx. 600 mm Seat height above support: approx. 200 mm Turning diameter above support: approx. 400 mm The machine is equipped with a tailstock, a clamping holder and a three-jaw chuck (diameter: 250 mm) Spindle clearance: approx. 74 mmweight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,000 x 1,800 mm

turning length: 1000 mmturning diameter: 325 mmturning diameter over slide rest: 250 mmspindle bore: 32.0 mmtailstock quill taper MT: 3 MKturning speeds: 85 - 2000 U/minbed width: 200 mmspindle taper: DIN 55027 GR 5total power requirement: 2.2 kWweight of the machine ca.: 770 kgrange L-W-H: 2150 x 950 x 1350 mmFurnishing:- robust conventional lead/pull screw lathe- 3-jaw lathe chuck Ø 160 mm type 3204/ DIN6350, BISON- NEWALL digital display, front left- MULTIFIX steel holder with 4x inserts- fixed bezel- rotating bezel- movable tailstock- Foot/spindle brake- Coolant device- Machine light- Chip back wall- Spindle protection- Lathe chuck protection- Tool holder protection- Interchangeable gears- User manual (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 750 mmturning diameter: 310 mmturning diameter over slide rest: 175 mmspindle bore: 32,0 mmtailstock quill taper MT: 3 MKturning speeds: 85 - 2200 U/minbed width: 200 mmspindle taper: DIN 55027 GR 5 total power requirement: 2,2 kWweight of the machine ca.: 710 kgrange L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college ()Furnishing:- Robust conventional center lathe- 3-jaw lathe chuck Ø 160 mm, with replacement jaws- NEWALL digital display, front left- MULTIFIX steel holder with 4x inserts- fixed bezel- moving bezel- Movable tailstock- Foot/spindle brake- Machine swing feet- User manual (PDF/NL) all technical data:- Turning diameter over bed 310 mm- Distance between centers 750 mm- Turning diameter over support 175 mm- Spindle bore 32 mm- bed width 200 mm- Spindle mount / DIN 55027 GR 5- Spindle taper 4.5 M- Spindle speed 85 - 2000 rpm.- Metric  ...

turning length: 750 mmturning diameter: 310 mmcentre height: 175 mmspindle bore: 32,0 mmtailstock quill taper MT: 3 MKturning speeds: 85 - 2200 U/minbed width: 200 mmspindle taper: DIN 55027 GR 5 total power requirement: 2,2 kWweight of the machine ca.: 710 kgrange L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college ()Furnishing:- Robust conventional center lathe- 3-jaw lathe chuck Ø 160 mm, with replacement jaws- NEWALL digital display, front left- MULTIFIX steel holder with 3x inserts- fixed bezel- moving bezel- Movable tailstock- Foot/spindle brake- Machine swing feet- User manual (PDF/NL) all technical data:- Turning diameter over bed 310 mm- Distance between centers 750 mm- Turning diameter over support 175 mm- Spindle bore 32 mm- bed width 200 mm- Spindle mount / DIN 55027 GR 5- Spindle taper 4.5 M- Spindle speed 85 - 2000 rpm.- Metric thread range 0.1 -  ...

turning length: 750 mmturning diameter: 400 mmcentre height: 165 mmturning diameter over slide rest: 190 mmspindle bore: 32,0 mmtailstock quill taper MT: 3 MKturning speeds: 85 - 2200 U/minbed width: 200 mmtotal power requirement: 2,2 kWweight of the machine ca.: 770 kgrange L-W-H: 1985 x 890 x 1195 mm New price ~ 23.000 euros from a training workshop ()Furnishing:- Spindle speed continuously adjustable in 2x switching stages- TOS 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key- NEWALL digital display, front left- MULTIFIX steel holder with inserts- Movable tailstock- live center, incl. quick-action drill chuck- digital speed display- Change gears- Foot/spindle brake all technical data:- Turning diameter over bed 400 mm- Distance between centers 750 mm- Center height 165 mm- Spindle bore 32 mm- Turning diameter over cross slide 190 mm- bed width 200 mm- Spindle mount / DIN55027  ...

Dreh-Øüber Bett: 320 mmDreh-Øüber Support: 185 mmturning length: 1000 mmSpindelbohrungs -Ø/ Aufnahme: 32 mm mmspindle turning speed range: (12) 85 - 2000 U/minfeeds - longitudinal: 0,006 - 1,77 mm/minfeeds - cross: 0,003 - 0,888 mm/minthread - mm pitch: 0,1 - 28 mmthread - module: 0,1 - 1,75 mmthread - inch: 2,5 - 75 inch.voltage: 400 V / 50 Hzpower capacity: 2,2 kWweight of the machine ca.: 0.8 tdimensions of the machine ca.: 1,8 x 0,8 x 1,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.