We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 102-118)
new
: 0390 mm: 240 mm: 1000 mm: 190 mm: 57 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 0390 mm: 240 mm: 1250 mm: 190 mm: 57 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 0390 mm: 240 mm: 1250 mm: 190 mm: 57 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: 0390 mm: 240 mm: 1250 mm: 190 mm: 57 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 0560 mm: 390 mm: 1500 mm: 280 mm: 82 mm: 9,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 0560 mm: 390 mm: 2000 mm: 280 mm: 82 mm: 9,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 0560 mm: 390 mm: 2000 mm: 280 mm: 82 mm: 9,5 kWspindle turning speed - stepless: 18-1800 U/minspindle taper: DIN 55029/D1-11 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 2,25/3,25 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Serial number 8060539, the machine is equipped with a 3-jaw chuck with a diameter of approx. 160 mm, a 3-axis digital readout, a tailstock and a Multifix base holderDrehlänge: 750 mm, turning diameter over bed: 360 mm, turning diameter over slide: 200 mm, spindle bore: 40 mm, weight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 800 x 1,600 mm
used
Description: Lead and feed spindle lathe with: 3-axis digital measuring system t electromagnetic main spindle brake auto. feed in longitudinal and plan direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions. Turning diameter over bed 410 mm Turning diameter over support 240 mm Turning length 1000 mm Turning diameter in the offset 530 mm Speed 65 - 1810 rpm Center height 205 mm Spindle bore 52 mm Tailstock quill holder MK 4 Total power requirement 2.2 kWweight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 800 x 1,300 mm
used
Specifications: Center height: 230 mm Center width: 1000 mm Circulation diameter over bed: 475 mm Circulation diameter over bed slide: 320 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: (18) 25 - 2240 1/min Motor power: 3.5 / 6 kW, 2-stage Tailstock mount: MK 4 Quill stroke: 120 mm Longitudinal feed: 0.06 - 0.8 m/rev Transverse feed: 0.044 - 0.6 m/rev Weight, approx.: 1800 kg Dimensions (wxDxH), approx.: 2560 x 1200 x 1710 mm Equipment: - 3-axis digital display, brand: Heidenhain - 3-jaw lathe chuck ø 315 mm with reversible jaws - Quick-change holder System Multifix - Rotating grain tip - Lathe chuck protection with limit switch protection - Emergency stop push button - Coolant device - Machine light - Chip pan
used
Description: Serial number 0693 Turning diameter in the offset 540 mm , Distance between the centres 1030 mm , The machine is equipped with one 3-jaw chuck, one tailstock, as well as existing documentation.Drehlänge: 1,000 mm, turning diameter over bed: 360 mm, turning diameter over slide: 200 mm, spindle bore: 52 mm, total power requirement: 5,5 kW, weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 2,260 x 550 x 1,300 mm
used
Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m
used
Working condition Complete electrics Yom: 1990 Technical details: Swing over bed: 2500 mm Turning length: 12 500 mm (The whole length of bed 15 700 mm) we can also make the extension of the needed workpiece weight: 120 tons bed width: 2 900 mm machine weight: 120 tons
used
: . max. swing diameter: 460 mmhollow: 66 mmdigital: . multifix: . centre distance: 1000 mmfeed:: . weight of the machine ca.: 1,8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 280 mmturning diameter over slide: - mmturning length: 500 mmspindle bore diameter: 28 mmturning speed range: 15 - 3100 U/minfeeds - longitudinal: 0,016 - 1,14 mm/Ufeeds - cross: 0,002 - 0,18 mm/Uthread - inch: 112 - 4 inch.thread - mm pitch: 0,2 - 7 mmcentre height: 140 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,5 x 0,6 x 1,2 m- Forkhardt 3-jaw Chuck F 160- Chuck guard- Lamp- Tailstock MK 3- change gears- div tool holders, steels, tailstock tips- collet chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Max length 8,000 mm Maximum turning diameter above wagon 1,250 mm Max vault over guides 1,650 mm Maximum turning diameter under spindle 2,000x700 mm Displayed – two axes
used
Turning diameter over bed 490 mm Center width 1500 mm Spindle bore 63 mm Spindle speed 2240 min-1 Chuck diameter 250 mm 2 x Bezel Tailstock Multifix
used
Tip height: 250 mm Center width: 1500 mm Circulation Ø: over bed 500 mm Spindle bore: 63 mm Spindle holder: Size 8 Mounting cone tailstock: 5 MK Spindle speeds: 170 - 2240 rpm Feeds: longitudinal/flat 0.014-1/0.0063-0.45 mm/U Thread pitches: 0.1 - 112 mm electrical connection: 380 V, 7.5 kW Space requirement: 2300 x 1000 x 1400 mm Weight: 2360 kg
used
Description: Center lathe - 3-jaw chuck 210mm - Multifix steel holder - Coolant pump - Chip protection wall - chip tray - Machine light Turning diameter over bed 400 mm Turning diameter over support 220 mm Turning length 1000 mm Speed 31.5 - 1400 rpm Center height 205 mm Spindle bore 50 mm Total power requirement 5.0 kW Machine weight approx. 1.4 t Space requirement approx. 2.5 x 1.2 x 1.7 mweight approx.: 1,400 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,200 x 1,700 mm
used
turning diameter over bed: 400 mmturning diameter over slide rest: 220 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 31,5 - 1400 U/mincentre height: 205 mmspindle bore: 50 mmtotal power requirement: 5,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,5 x 1,2 x 1,7 mCenter lathe- 3-jaw chuck 210mm- Multifix steel holder- Coolant pump- Chip protection wall- chip tray- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 500 mmturning diameter over slide rest: 300 mmturning length: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable ...
new
Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...
used
Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...
used
Main technical data: - Tip distance: 6000 mm - Tip height: 640 mm - Lathe complete with spindle, tailstock and tool turret
used
Description: Attention: Drive motor broken off - transport damage (see pictures)! Turning diameter: Over bed: 410 mm Over support: 240 mm Turning length: 1000 mm Center height: 205 mm Center distance: 1000 mm Spindle bore: 47 mm Spindle speeds: 28 - 1250 rpmweight approx.: 1,300 kg, Approx. Onsite Dimension. (l x w x h): 2,320 x 1,150 x 1,220 mm
used
turning diameter over bed: 410 mmturning diameter over slide rest: 240 mmturning length: 1000 mmcentre height: 205 mmcentre distance: 1000 mmspindle bore: 47 mmspindle turning speed range: 28 - 1250 U/minfeeds - longitudinal: 0,03 - 8,8 mm/Ufeeds - cross: 0,006 - 1,84 mm/Uthread - mm pitch: 0,25 - 76 mmthread - inch: 1/2 - 152 Gg/thread - module: 0,25 - 22 mmbed width: 320 mmtailstock quill diameter: 55 mmtailstock taper MT: 4 total power requirement: 5,5 kWweight of the machine ca.: 1,3 tdimensions of machine L x W x H: 2,32 x 1,15 x 1,22 mAccessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
MEUSER M II S gap bed engine screw cutting lathe Swing over ways 600 mm Swing over cross slide 400 mm Swing in gap 860 mm Turning length 1500 mm Spindle speed 1200 rpm Steady rest Chucks- 3 pcs Threads metric & English Weight ca. 2500 kg
used
Description: Turning diameter over bed: approx. 500 mm Turning diameter over support: approx. 350 mm Center width: approx. 1500 mm Through bore: approx. 55 mm Speed range: approx. 28 - 1250 rpm Serial nr.: 25689weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,000 x 1,400 mm
used
Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working
new
Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...
new
Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...
new
Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...
new
Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...
used
turning diameter over bed: 520 mmturning diameter over slide rest: 300 mmturning length: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-jaw chuckMultifix tool holder devicetail stockTechnische Daten / technical details:Drehlänge / turning lenght 1000 mmDreh-Ø über Bett / turning Ø over bed 520 mmDreh-Ø über Schlitten / turning Ø over sledge 300 mmDrehzahlbereich / spindle speed 30-1600 UpM /rpmGewicht der Maschine ca. / weight 2500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 400 mmturning diameter over slide rest: 220 mmturning length: 1000 mmcentre height: 200 mmbed width: 340 mmspindle bore: 68 mmtailstock taper MT: 4 diameter of quill: 65 mmnumber of speeds: 16 spindle turning speed range: 40-2000 U/mindigital readout: neu, 2-Achsen 3-jaw chuck: Ø 250 mmweight of the machine ca.: 1800 kgdimensions: ca. 2500 x 1000 x 1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Chuck diameter 315mm Face slide travel 375mm top slide travel 195mm SN 172/05 Voltage 400 V 3/PE 50 Hz Power 23 KVADrehlänge: 2,000 mm, turning diameter over bed: 650 mm, turning diameter over slide: 350 mm, spindle bore: 80 mm, turning speed range: 2-1800 rpm, weight approx.: 6,500 kg, Approx. Onsite Dimension. (l x w x h): 4,100 x 2,000 x 2,000 mm
used
: 115 mmamount: 4 Stück im Paket : für Drehbank : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
digital display swingdiameter over bed 800 mm swingdiameter over slide 600 mm distance between center 2000 mm spindle speed750 1 / min multifix tailstock
used
turning diameter over bed: 350 mmturning diameter over slide rest: 200 mmturning length: 800 mmspindle bore: 46 mmspindle turning speed range: 18: 25 - 2000 U/minspindle head: Din 55027 Gr. 5 total power requirement: 4,4/2,2 kWweight of the machine ca.: 800 kgdimensions of the machine ca.: 2 x 1 x 1,8 mVideo available on our website.: Condition: ready for operation: Electric 380 Volt: 3 jaw chuck: neu 160 mmMultifix-toolholder with tapers: Rear chip protect: Faceplate: Röhm 310 mmMotor brake: Universal lathe from the training area with new 3-jaw chuck, face plate and multifix holder. It was not heavily used, which can be seen from the little paint wear on the back wall.We ask interested private parties to refrain from making an inquiry, as it is awell-preserved professional machine and is therefore too expensive (+ VAT!) for hobby mechanics.Machine dealer with own stock of 1600 m ...
used
greates pass round over bed: 175 mmswing diameter over slide rest: 350 mmcentre distance: 800 mmbed width: 220 mmspindle bore: 46 mminternal taper -metric: 50 (1:20) mmchucking diameter: 160 (max. 200) mmface slide travel: 225 mmupper slide: 100 mmswival range +/-: 45 Gradlead of leadscrew: 6,0 mmquill stroke: 130 mmdia. of quill: 50 mmtaper: 3 MKnumber of spindle speeds: 3,5-2500 minnumber of spindles: 18 power capacity: 4,7 kWlongitudinal feeds:: 0,051-1,034 mm/Uface feeds: 0,025-0,517 mm/Umetric threading: 0,4-7,0 mmDimensions (L/W/H): 1920x990x1360 mmweight of the machine ca.: 900 kgvoltage: 400 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
New lathe. Distance between centers: 800mm. Swing: 350mm. Swing over carriage: 200mm. Spindle hole: 46mm. Speeds: 18. (31,5-2500rpm). Power: 4hp. Dimensions: 2050x1000mm. Weight: 1100Kgs. Equipped with chuck and steady rest.
new
New lathe. Distance between centers: 2200mm. Swing: 500mm. Swing over carriage: 330mm. Swing in gap: 690mm. Spindle hole: 52mm. Speeds: 18. (25-2000rpm). Dimensions: 3700x1000mm. Weight: 1750Kgs. Equipped with chuck and steady rest.
new
New lathe. Distance between centers: 1000mm. Swing: 500mm. Swing over carriage: 305mm. Spindle hole: 80mm. Speeds: 18. (19-1500rpm). Weight: 1680Kgs. Equipped with chuck and steady rest.
used
Center height: 160 mm Center width: 880 mm Spindle bore: 48 Bed width: 312 mm Speeds: 45 - 2000 min-1 Motor power: 5.5 kW Tailstock mount: MK 4 Quill stroke: 140 mm Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2250 x 1030 x 1650 mm Equipment: - 3-axis digital display, brand: Sino, new - 3-jaw lathe chuck - Emergency stop impact button - Quick release holder System Multifix - Machine light - Bed stop - Coolant device - Rotating grain tip - Machine shoes - Splash guard back panel -Operating instructions
used
Ref. -No.: 10317Manufacturer: NOSOTTIType of control: Digitalanzeige - Mini wizardControl: KonventionellStorage location: HalberstadtCountry of origin: ItalyTip length: 3000 Centre Height: 260 mm
used
turning diameter over bed: 910 mmturning diameter over slide rest: 670 mmturning length: 3000 mmturning dia. in gap: 1200 mmspindle turning speed range: 7-800 U/minweight of the machine ca.: 5.3 tdimensions of the machine ca.: 5x1.6x1.7 mMisc.accessorieswww.marcels-maschinen.chThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter: 500 mmturning length: 1250 mmswing diameter over bed slide: 285 mmturning speeds: 11,2 - 2240 U/minspindle bore: 62 mmquill stroke: 190 mmtailstock quill taper MT: 5 total power requirement: 13,0 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 3350 x 1500 x 1300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.