- Total installed power approx. 60 KW. - Dimensions of the aluminium work table approx. 6700 x 1570 mm. - Z-axis travel 340 mm. - Tool magazine with 12 positions. - Electrospindle: power 7.50 KW-max. 18000 rpm, automatic tool change, for HSK F63 tool holder. - Vertical holes in the x-axis direction: 5. - Automatic lubrication. - Numerical control NUM. - Remote control panel. - BECKER VTLF 250 vacuum pump with a capacity of 248 m³/h. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-1
Different types and sizes 3x wired. Auction-ID: A1-50667-65
approx. 17 pieces, without content Auction-ID: A7-50851-63
Contents of office space, consisting of 2 roll containers with various servers and network equipment (no hard disks available), various boxes, connection cables, cables, monitors, etc. The buyer must deliver the space empty. Auction-ID: A1-50667-109
- Total installed power 250 KW. - Motorized height positioning. - Transport table with vacuum, 15 KW depressor. - Variable feed speed from 5 m/min to 25 m/min. - 11 KW advance motor. - Workpiece detection device: provides the machine control system with information about the shape and size of the workpieces to be processed as well as their position on the conveyor belt. - Group 1: grooved steel gauging roller, 55 KW motor. - Group 2: grooved steel gauging roller, 55 KW motor. - Group 3: grooved steel gauging roller, 55 KW motor. - Group 4: longitudinal sanding unit with CSD pressure system, belt dimensions 2620 x 1350 mm, 16.50 KW motor. - Group 5: longitudinal sanding unit with CSD pressure system, belt dimensions 2620 x 1350 mm, 16.50 KW motor. - Group 6: cleaning brush, 1.50 KW motor. - PC Control with touch screen. - Operating conditions of this machine: unchecked. - T ...
- Total installed power 31 KW. - Edge thickness in rolls from 0.4 mm to 3 mm. - Edge thickness in rolls from 0.4 mm to 25 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed speed from 10 m/min to 25 m/min. - PC Office control. - Input spindle moulding group, 2 x 4 Kw-12000 rpm motor. - Edge loader for 1 roll. - Gluing unit with boiler for granulated hot melt adhesive, with prefuser. - Pressure group with (1+6) rollers. - Cross-cutting group with 2 motors of 0.35 KW-12000 rpm. - Straight roughing group, 2 x 1.03 KW-12000 rpm motor. - Spoke profiling group, 2 x 0.55 KW-12000 rpm motor, tiltable up to 45°. - Spoke profiling group, 2 x 0.35 KW-12000 rpm motor, tiltable up to 45°. - Shape group with 4 motors of 0.35 KW-12000 rpm, with quick release of the motors. - Radius scraper group. - Tail scraper group. - Cleaning brush group, 2 x 0.30 KW-1500 rpm m ...
Two-station Auction-ID: A7-50851-65
- Total installed power 1.80 KW. - 3 x 2 vertical pressure cylinders. - 2 x 2 horizontal pressure cylinders. - 2 independent work areas. - Maximum pressing dimensions approx. 2350 x 600 x 1200 mm. - Working pressure: 0-100 kg/cm². - Operating conditions of this machine: unchecked. - Dimensions for transport approximately XXXX x XXXX x XXXX mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-4
Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-3
- Total installed power 8.80 KW. - Edge thickness from 0.40 mm to 16 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Minimum length of the piece 140 mm. - Minimum width of the piece 60 mm. - Adjustable feed speed from 10 m/min to 20 m/min. - 1.50 KW advance motor. - Control. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+2) rollers. - Cross-cutting group, 2 x 0.50 KW-12000 rpm motor. - Spoke profiling group, 2 x motor at 12000 rpm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-6
Equipped with cable duct. This only concerns the hardware, software not present. With Datalogic scanners and Ilyama Prolite TF3215MC screens. Auction-ID: A1-50667-17
- Maximum drawer width approx. 1150 mm. - Maximum drawer depth approx. 1200 mm. - Maximum drawer height approx. 250 mm. - 2 oscillating sanding heads with electronic positioning, 2 x 5.50 KW motor each. - Dimensions of the side table 1200 x 300 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-7
2 cells, no welding machine Auction-ID: A7-50851-67
Unused in box. This only concerns the hardware, without software. Auction-ID: A1-50667-29
80 €
