X-travel: 3750mm, y-travel: 2070mm, z-travel: 330mm, B-travel: /-90°, C-travel: 720°, workpiece dimensions: 80-2790x3-19mm, length: 5840mm, width: 3125mm, height: 1520mm, weight: 7t, one new additional spindle is available.
19.8 / 22.2 kW, MTA chiller / heat pump air-cooled, type: HCYGNUS TECH 081 ACC P1 M.T.A. S.p.a.. HCYGNUS TECH 081 ACC P1 are compact water cooling chillers / heat pumps, which are suitable for outdoor installation. Inclusive crank case heater, phase monitoring, buffer tank and built-in P1 circulating pump. This machine can be operated as a chiller or heat pump. Cooling capacity kW 19.8 Cold water temperature exit / entry: 7 / 12 °C Flow rate m³/h 3.4 Available pump pressure bar 2.1 Ambient temperature ...
Type Mitutoyo B 706 Machine type hand-held 3D measuring machine built in 1989 Control GEOPAK 3, V5. 01 Probe Renishaw PH1 Size 1.63 x 1.41 x 2,55 meters Working area x 700 mm, Y 650 mm, Z 600 mm Last maintenance 2017 including calibration weight approx. 2,000 kg Price VB â?¬9.999,--/ from location available from immediately site 88525 Dürmentingen Machine is fully functional and can be visited on site under current at any time.
9.89 / 11, 2kW, MTA chiller / heat pump air-cooled, type: TAE / HAE Evo 031 M.T.A. S.p.a.. TAE / HAE Evo 031 are compact water cooling chillers / heat pumps, which are suitable for outdoor installation. Inclusive crank case heater, phase monitoring, buffer tank and built-in P3 circulation pump. This machine can be operated as a chiller (water cooler) or heat pump. Cooling capacity kW 9.89 Cold water temperature exit / entry: 7 / 12 °C Flow rate m³/h 1.7 Ambient temperature °C 32 Heating power kW 11 ...
2 piece color mixers 30 kW 2 pump 4 kW 4 piece accessories Weight 3000kg
For sale exclusively on 21 February 2019 at 10-00 in Cazzago San Martino, Bs Make: FAIP model: R952 Hours: 8,665 Equipment: Man on board For more information contact us at + 39 392 4703149 Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00
Screw compressor Ecoair A15 Manufacturer: Ecoair Type: A15 Year of construction: 1999 Technical data: Final compression pressure of bar Max 8.0 Power consumption of the compressor 11.0 kw Speed 2880 RPM Weight soundproof 227 kg Voltage 400 V Frequency 3/50 Hz
Screw air compressor CompAir Manufacturer: CompAir Type L15 7, 5A, Model year 2011, CE mark Hours: 4500 Digital PLC control, maximum working pressure 7,5 bar min. Mop5 5.0 bar Ambient temperature + 1 / + 45 ° C Druckluftendtemperartur 11 ° C Noise level 70 dB(A) Drive motor 15 kW Voltage 380 V (50,60 Hz) Full-load current Max 220V / 62A Full-load current Max 400V / 33A Motor protection class: IP55 Nominal speed 3000 1/min Fan cooling flow 47 m³/min Cooling air temperatures over ...
Baghouse / dust removal system Manufacturer of NEO technology BTR Envionmental Type NFCT 720/133 80 Flow 23200 m³/h Filter surface 200 mÂ²
Complete screen unit with roll Crusher Manufacturer Merz Roll Crusher F WBG 3/10 Screening machine UKA II 1000/2000 Built in 1995 on demand with complete supply and acceptance Documentation available
Dryer drum drying plant Field of application was sewage sludge Manufacturer Mozer Type 1407120/12 D Year of manufacture 1995 wening run BrennerWeishaupt Built in 1995 Ty RGL 9/1-D, ZMD 830-3500 kW Combustion chamber Drive complete Control Documentation
Qty. 1 Second-hand corrugator line Mfc.: Peterson Sarpborg Built: 1997, Last Update: Dec 2018 By: MVB Max. width: 2500 mm Use width: 1900, 2100, 2300 & 2500 mm Max. mechanical speed: 300 m/min Machine direction: LHDPG Fluting smaller than liner: Yes 10 mm Flute/board types: E, B & C EC & BC Corrugating rolls: Mfc.: Friese Hardened B – C – E Process or Quality Control System Splice Synchro Mfc.: MARQUIP Starch used on corrugator: Mod. Wheat C & D
The OPTIV REFERENCE 763 DUAL Z combines a tactile and optical measurement. The Data acquisition via a switching/measuring switch laser as well as white light sensor (chromatic white light sensor/CWS). Measuring range: 600 x 600 x 300mm. Maximum workpiece weight: 150 kg, when using the Glass plate / transmitted light measurement: 50 kg. Accuracy depending on the measuring procedure: 0.5 -. 1, 3Î¼m. machine weight: 3 000 kg. Dimensions (Lxwxh) machine: 1.805 x 1,918 1,890 mm. service area of min. 6 ...
There are two label printers with software available: (1) CAB A4+: resolution: 300dpi, printing speed: 250mm/s, printing width: 105,6mm (2) CAB A4+ M: resolution: 300dpi, printing speed: 120mm/s, printing width: 105,6mm, including cutter, stacker and anti-static lamp.
Data: -Year of construction: 1993 -Machine number: 1043 -Disassembled and ready for immediate operation -Hydr. Table is tilted -Dimensions table 1: 3400 x 3600 mm -Table 2 dimensions: 3520 x 2460 mm -Max glass thickness: 12 mm -Weight: 2000 kg Price on request
used Stainless steel container container ------------------------------------------------ mounted in steel galvanized transport frame, with revision opening up and residual flow Content based on approx. : 1,000 l Material: V4A / 1.4571 Dimensions: L x W x H approx. : 1.220 x 1,020 x 1,950 mm
1 used stainless steel container ---------------------------------- cylindrical standing on 4 steel feet,. with sloping ground below. top with cone bottom, with a manhole opening in the upper floor. with insulating sheath and various Connection options Content approx. : 3,200 l
used Stainless steel pressure tank ------------------------------------------ wall, lying with dished, cylindrical welded version, with manhole in the front floor and various connection options Content approx. : 17,000 l Material: V4A 1.4571 Max. Operating pressure: 10 bar Max. Operating temperature: 100 Â° C Year of construction: 1994 Previous use: hot water tank
1 used pressure tank ---------------------------- wall, standing on feet,. with curved bases, cylindrical welded version, with manhole in the cylindrical part and various connection options Content approx. : 10.000 l Material: Steel / P 265 GH Operating pressure: 10 bar Test pressure: 14.3 bar Year of manufacture: 2009
WITT Gasetechnik test facility Type 722 + holder type 743 A VAT invoice is created for you.
Number of axis: 3, max. input frequency: 2m/s, connected load: 25VA, ambient temperature: 0-45°C, humidity: 20-80%, display unit including 2x linear scale 1300mm and 1x linear scale 1000mm, unused and in the original box.
Qty. 1 Second-hand steel cold rolling mill Mfc.: CHANG ZO Type: 4-Hi Reversing mill Built: 1995 Strip width: 80-350 mm Thickness Entry: 3.2 mm Exit: 0.1-2.3 mm Coil I.D: 508 mm O.D: max.1550 mm Weight: max. 4 ton Speed: max.170 m/min. Cyclo gear with geared motor max. 200 ton Work roll: ?160400 mm L(Barrel) Back-up roll: ?415400 mm (Barrel) Voltage: 3 ph. 220 VAC, 60 Hz Control voltage: 1 ph. 220 VAC, 60 Hz Dimensions: 8.5 m6.5 m (Machine)
Qty. 1 Second-hand complete cold rolling mill plant Mfc.: Seoul Furnace Co., Alco Eng., Hanna Eng., Ramco Saelen, Mannesmann, Deuksung Eng. Co., Poscon Built: 1995 Strip width: 1350 mm Thickness exit: 0.2 mm Scope of supply: Melting furnace Holding furnace Slab casting machine Ingot scalper Band saw Annealing furnace (3) Hot rolling mill Cold rolling mill
This is pipes, trough chain conveyors, elevators, various support units. The vast majority is located in a reinforced concrete silo (manufacturer: Haase), where also a dryer is housed. the dryer creates 7-8 tons per hour and is fired with fuel oil
Qty. 1 Second-hand billet casting production line Mfc.: Nikko, Kumsoo Concast Built: 1994, 1995 & 2006 Revamped: 2002, 2008 & 2010 Casting speed: 2.4-3.6 m/min. Billet size: 120 x 120 mm, 130 x 130 mm & 170 x 170 mm 1 EAF Capacity: 60 tons per charge Built: 1994 Revamping: 2010 Mfc.: Nikko ( Japan) and other Japanese and Korean brand 2 Ladle Furnace Capacity: 60 tons /charge Mfc.: Kumsoo Built: 2006 3 CCM Mfc.: Concast Built: 1995 Revamping: 2002 & 2008 Radius: 9000 mm Strand: 4 Spee ...
Qty. 1 Second-hand cold rolling mill. Mfc.: KOBE STEEL LTD. Built: 1987 Type: 4-Hi rev. – hydr. push-up system Strip Width: 260 ? 435 mm (min 250 mm) Thickness: Max. 3.5 mm Finished Strip Thickness: 0.10 mm Rolling Speed: 150/450 m/min. Material : Copper and Copper Alloy ID: 400 mm W/O Attachment 500 mm C/W Attachment OD: 800 ? 1,450 mm Coil Weight: Max. 4,000 kg ID: 400 mm ( Pay Off Reed Dia. 400 mm, 500 mm ) OD: 800 ? 1,450 mm Work Roll: 180 (?)520 mm (L) Back Up Roll: 510(?)500 mm(L) ...
4inch(100mm) x 6mm thickness tube mill line(Including Square tube) Required space: approx.. 50m x100m Product capacity:120,000ton/y Make:Korean Year:1978~2012 Steel tube outer diameter:34mm~114.3mm(1inch~4inch) Square tube: 100x100~50x50 125 x75~60 x40 Tube thickness:1.4~6mm (Equipment list) Electric panel(Year:1999) Entry equipment Mill (Year:1978) -Pinch leveler -Forming(D.C motor) -Fin pass(D.C motor) -Upset -Water cooling -Sizing(D.C moto ...
Data: -Year of construction: 1992 -Type: VR 1114 -Machine is available from January 2019 -has worked no more than 2 hours per week -is in very good condition Price on request
Images are of a comparable machine, machine is in current production Data: -Year of construction: 1988 -Direction of rotation: right links -8 spindles -Glass thickness: 2-15 mm -Total length: 7100 mm -Gessambreite: 900 mm -Overall height: 2500 mm Price on request
Machinery and equipment for paper and bookbinding On exclusive sale next 24 January 2019 at 10-00 at our offices in Bergamo Check out our Mercury auctions website for a direct download of the full call for applications and catalogue, or contact us at 030 7751645 office hours 9-13, 14:18 Machinery: -trainer for boxes brand, freshman 737 series type ICMI CG50 BETA, year 1990, size cm 41X61 h. 48 cm-press for hot printing brand C6113 P1520AT1 type semiautomatic, freshman year, CICRESPI 2000-machine, creasing and f ...
Filter area: 60 sqm number of filters: 60 pieces Filter diameter / length: 160/2000 mm Total power: 7.5 kW Machine weight: 400 kg Required space (W x D x H): 3.4 x 1.0 x 4.0 m Condition: very good with 5 collection containers / tons Accessories: with C-tube connection option for extinguishing in case of fire, fan 7,5 kW - diameter 300 mm
Data: Type: LWH 20 USA -Serial number: 140 108 0180 -Year of construction: 1980 -Machine weight: 500 kg -Power supply: 50 Hz, 380 V, 3 kW, 7 bar Price on request
MACHINERY FOR GLUING, ROBOT ARMS, WOODWORKING, FORKLIFTS, MISCELLANEOUS. For sale exclusively at 10:30 next January 23 2019 in Bergamo (BG) Check out our website mercury auctions to download participation form and complete catalogue, or contact us at 030 7751645 office hours,9-13 14:18. Nr. 1 h, 2500 kg forklift 6900 flow, fixed forks Steinbook PE 25 year 1998 Nr. 1-Comau Smart Robot S2 Nr. 1-Car to warm up the glue (piattofusore) Tecno Incollaggi AZP20 year 2007 Nr. 1-robot arm for bonding Sintac IX NNN3515 ...
Central coolant system Knoll. With Automatic filling and coolant-% mixing system
Machinery workshop and office furniture For sale exclusively next 06th February 2019 at 10:00 o'clock in Cazzago San Martino, Brescia Visit our website or contact us at 030 7751645 to learn more about it and see the lot! Workshop machinery: Disc saw (saw) Palmer mod. Brown 300 MRM matr. 026237 Three workbenches to assemble cylinders Welding area with two welding machines (a TIG CEA Tigtronic 505 and a knitted REHM), wall-mounted pivoting Cap piece, exhaust fan support, a bench with vise, a double wheel Main ...
Used concrete block making machine Fabr. Henke / Masa with core and attachment Board size 1400 x 1050 mm stroke head countersunk head vehicle group packaging strapping Chambers in a diverse Formen.Mischanlage is complex, ZementsilosDie now can a ready state, but also to the present Site be continued. For more information, 0171 6232061 or via MailLonz - measuring and RegeltechnikBrunnenstrasse 22 65510 Idstein
Inertia type NVH brake dynamometer, Single Base Machine with Three Discs (1 fixed, two moveable) Features the following major assemblies: - 186 kW DC Main drive system; 2500 1/min - 5500Nm max. brake torque measurement system at the tailstock with dual range capability. - 5500 Nm In-Line Rotating torque cell (torque meter) - Air/Brake Fluid Apply System, - Double-walled, stainless steel, insulated step up brake enclosure with overhead crane, and platform test bed with angle bracket.
Stand device with steel plate Measuring plate: 6000 mm x 3000 mm Measuring range: x = 5000 mm, y = 2600 mm, z = 2100 mm Rotary Swivel Head RDS for TP Control of C99 (current Zeiss control) Control Panel DYNALOG Without soft - and hardware -Move with control unit on the stand, opto Coupler, screen, keyboard, mouse -active vibration damping
Axial fans for wall mounting or long housing Robust axial fan for wall mounting or long case. The PL version is supplied with a plastic rotor and AL-version with aluminum rotor. Â Â Fan: -Direction of the air flow from the engine to the rotor;
empering(hardening) FURNACES of Automobile parts. 1. Pit Type TEMPERING Furnace x2sets Make:Simdo(Korea) Year:2016 Capacity:3ton/charge Heater:KANTHAL STRIP HEATER Temperature:950degree Size:760mm diameter x1600mm 80KW/2PART Control panel 2. Pit Type Furnace Make:Simdo(Korea) Year:2016 Capacity:5ton/charge Heater:KANTHAL STRIP HEATER Temperature:950degree Size:1200mm diameter x1800mm 140KW/2PART Control panel 3. Pit Type Furnac ...
Heat Pad(Pocket Warmer) Producing Machine Make:Toa Kikoh(Japan) Year:2013 Model : KC-500 Cap' : 520sheets/min 4-lane type Dimension : 4,200(W)x12,000(L) x 2,400(H)mm BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:paekJs1961@gmail.com MOBILE)+82-10-7499-2567