Tower boiler Hybrid S 35/200 BS1 Auction-ID: A7-49228-1
\"General Description Classic Mercedes-Benz 170 S (W136 IV) four-door saloon with left-hand drive. Powered by a petrol engine with manual transmission. The vehicle is registered in Greece and is presented as a historic collector's vehicle with largely original interior and restored or older black exterior finish. Technical Details Manufacturer: Mercedes-Benz Model: 170 S (W136 IV) Vehicle type: Classic passenger car Registration year: 1957 (production year not confirmed) Chassis/Serial No.: 136922076473 (registration document) Fuel: Petrol Transmission: Manual Seats: 5 Registration: Greece (Historic Plate No. 5959) Condition Good driver-quality classic. Body appears straight with complete chrome trim, original-style wheels and hubcaps, and largely original dashboard and interior. Steering wheel shows age-related cracks and interior wear consistent with normal use. Mechanical condition, ...
purchased in 2020, upgraded in 2021 (replaced the glass traps with stainless steel and providing additional isolation for the traps), comes with an electrical transformer which makes it compliant both for North America and Europe. In perfect condition, used only for demonstrative purposes with a work time of less than 500 hours. Processes up to 80 lbs (35 kilogram) per hour depending on process conditions.SPECIFICATIONS:Throughput Capacity 10 - 80 lbs/hr (4.5 – 36.3 kg/hr) Type ContinuousPumping system ultimate pressure: 2 X 10-4 TorrOperating Pressure 10 -3 Torr to AtmosphereMechanical Forepump >11 CFMHigh Vacuum Pump 320 L/sec of air at 250C.FULL DESCRIPTIONCentrifugal molecular distillation is a purification technique, which has gained wide acceptance in the chemical, food processing, pharmaceutical, and petroleum industries as well as the specialty chemicals industry. The PILOT- ...
A deposit of €1200.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Slide size 1000x800 mm Slide stroke 100 mm Strokes per minute 40-100 Opening between uprights 520x260 mm Worktop size 1000x800 mm REEL Max reel width 600 mm RECTIFIER Max belt width 500 mm It should be noted that the dismantling and loading operations of the machinery for sale must be carried out exclusively by a specialized external team in charge. The successful bidder will not be able to provide for it independently, but may attend the activities for mere supervision. The related costs, quantified at € 3500, will be invoiced directly to the winning bidder by the team in chargeThe cost does not include the possible disposal of the oils present in the plant, this will be invoiced ...
Tank manufactured in 2019, installed in 2020 - manufactured in the highest quality by the recognized company PRO-WAM from Koszalin, used several times and put aside due to a change in the process. Tank like new, in amazing condition, on wheels. Pressure up to 2 bar, with mixing and heating, made of stainless steel AISI 316L. Two UV light radiators have been additionally designed for the tank, mounted from the top through sight glasses.----Process tank 250 l· vertical tank· pressure tank up to 2 bar· main tank made of stainless steel AISI 316L· tank insulated with mineral wool with a thickness of 50 mm in the cylindrical part and on the bottom endouter jacket made of stainless steel AISI 304, thickness. 2mm· bottom and top bottom pressed DIN 28011· heating jacket· glycol heating tank· circulation pump· heating medium temperature sensor· expansion vessel of the heating systemelec ...
In order to submit a bid on this lot, a deposit of €2000.00 is required. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Slide size 1220x1070 mm Slide stroke 400 mm Shots per minute 15 Opening between the uprights 1270x450 mm Worktop size 1220x1070 mm REEL Max reel width 500 mm RECTIFIER Max belt width 500 mm It should be noted that the dismantling and loading operations of the machinery for sale must be carried out exclusively by a specialized external team in charge. The successful bidder will not be able to provide for it independently, but may attend the activities for mere supervision. The related costs, quantified at € 3800, will be invoiced directly to the winning bidder by the team in chargeThe cost does not include any disposal of the oils present in the plant, this will be invoiced during ...
Stock 4 pcs 2 x (SHP M Pro 010) + 2x (Hybrid Kit) Auction-ID: A7-49228-2
\"General Description Single-seat recreational hovercraft of custom or amateur-built construction. The craft features an enclosed cockpit, rear ducted propulsion fan, fiberglass hull and three-blade composite propeller. Mounted on a road trailer, it is designed for amphibious operation over land and water using an air-cushion lift system. Technical Details Manufacturer: Unknown Model: Unknown Vehicle type: Recreational hovercraft Identification No.: AU-WWA189378 (NSW Transport) Engine: Petrol (make and model unknown) Seats: 1 Fiberglass hull Three-blade composite propeller Enclosed cockpit Digital engine display and instrumentation Trailer included Condition Good cosmetic condition. Hull appears straight with fresh paint, intact cockpit glazing, complete controls, undamaged propeller and duct assembly. Engine instrumentation is installed and the trailer is included. Engine hours, skirt ...
SHP M Pro 010 + Hybrid Kit 4 pcs + 2 kits Auction-ID: A7-49228-3
A deposit of €280.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Maximum force 470 daN Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. It should be noted that the dismantling and loading operations of the machinery for sale must be carried out exclusively by a specialized external team in charge. The successful bidder will not be able to provide for it independently, but may attend the activities for mere supervision. The related costs, quantified at € 120, will be invoiced directly to the winning bidder by the team in charge Auction-ID: A7-48398-3
Mileage: approximately 22,191 km,Weight: 204 kg,Length: 228 cm,Width: 93 cm (measured across the handlebars),Height: 144 cm (including mirrors), Auction-ID: A7-49177-3
Purchased in 2021, factory refurbished in 2021 (to brand new equivalent condition) compliant both for North America and Europe. In perfect condition, used only for demonstrative purposes with a work time of less than 500 hours. Shipped to Europe, CE and food grade GMP certified. Processes up to 8 kg of input material per hour depending on process conditions.The extraktLAB E-140 is the fastest, most advanced and most powerful CO2 extraction machine on the market today. The machine is designed to provide high yield in a short period of time while satisfying the traceability requirements for GMP compliancy.extraktLAB’s supercritical CO2 extraction equipment can run a variety of extraction methods.FEATURES:• Sub or Supercritical CO2Extractions• Full Spectrum Extracts• Fully Automated Methods• UL, ASME, PED, EPR Certified• Scalable• GMP Compliant SoftwarePROCESSING POWER• Up t ...
Technical details Type: Electric forklift truck Power source: Battery electric Battery voltage: 48 V Battery year: 2021 Operating hours: 14434 h Lifting capacity: 5000 kg Load centre capacity: 2000 kg Mast type: Triplex Configuration: - Side shift attachment - Non-marking tyres - Electric drive system - Industrial counterbalance design Application: - Warehouse operations - Logistics centres - Food and pharmaceutical facilities - Indoor material handling - Manufacturing environments Features: - Side shift for precise load positioning - Non-marking tyres suitable for indoor floors - High-capacity electric lifting system - Multi-stage triplex mast for increased lifting height Condition: Used Observed condition: - Battery replaced in 2021 - Operating hours recorded at 14434 h - Operational status not independently verified Auction-ID: A7-49177-4
A deposit of €75.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. It should be noted that the dismantling and loading operations of the machinery for sale must be carried out exclusively by a specialized external team in charge. The successful bidder will not be able to provide for it independently, but may attend the activities for mere supervision. The related costs, quantified at € 120, will be invoiced directly to the winning bidder by the team in charge Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-48398-4
Stock 3 pieces Eurosmart mixers Auction-ID: A7-49228-5
\"General Description Jet-powered pontoon boat manufactured by Sea-Doo (Bombardier Recreational Products Inc. – BRP), model Switch Cruise 21-230. Designed for recreational cruising and leisure activities on inland and coastal waters. The modular Tri-Hull pontoon design combines a spacious deck layout with Sea-Doo's Rotax jet propulsion system. Supplied with a twin-axle galvanized trailer. Technical Details Manufacturer: Sea-Doo (BRP) Model: Switch Cruise 21-230 Year: 2022 Hull Identification Number (HIN): CA-YDVC6340G222 Engine: Rotax 1630 ACE 230 ECT Engine serial number: MP425867 Power: 230 HP (169 kW) Hull type: Tri-Hull pontoon Jet propulsion with iBR Intelligent Brake & Reverse Closed-loop cooling system Fuel tank: 110 L Length: 6.20 m Beam: 2.40 m Dry weight: Approx. 1,156 kg Maximum load: Approx. 675 kg Passenger capacity: Up to 9 persons (registration) Garmin 7\" display w ...
A deposit of €150.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Slide size 350x210 mm Slide stroke 80 mm Shots per minute 10-50 Max mould height 300 mm Worktop size 750x445 mm It should be noted that the dismantling and loading operations of the machinery for sale must be carried out exclusively by a specialized external team in charge. The successful bidder will not be able to provide for it independently, but may attend the activities for mere supervision. The related costs, quantified at € 350, will be invoiced directly to the winning bidder by the team in chargeThe cost does not include any disposal of the oils present in the plant, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are ...
General Description Panel van manufactured by Renault, model Master L3H3 2.3 dCi. Long-wheelbase, high-roof commercial vehicle designed for high-volume cargo transport and delivery applications. Equipped with a side sliding door, twin rear doors and tow hitch. Technical Details Manufacturer: Renault Model: Master L3H3 2.3 dCi Machine type: Panel van Year: 2014 VIN: VF1MAF4EH47443337 Engine: 2.3 dCi diesel (2,299 cm³) Engine code: M9T B7 Power: 100 kW (136 HP) Mileage: Approx. 390,000 km Emission standard: Euro 5 Vehicle category: N1 – Light commercial vehicle Body type: BB Furgon Configuration: L3H3 (long wheelbase, high roof) Side sliding door Twin rear doors Tow hitch Plywood-lined cargo area Protective cargo side panels Gross vehicle weight: 3,500 kg Unladen weight: 2,085 kg Condition Used commercial vehicle in good overall condition. The body appears straight with no visible evi ...
Stock 6 pcs Bellosta taps Edwar single-hole washbasin unit Auction-ID: A7-49228-6
2.500 €
