Equipment:- Heidenhain digital display- feed and spindle infinitely adjustable- coolant system- chip protection- hydr. Vise- good condition- SK40 tool mounts and accessories see picturesx-travel 850 mmy-travel 300 mmz-travel 450 mmtable size 1100 x 250 mmcontrol conventionalpick-up SK40speed range 35.5 - 1800 rpmquill stroke mmtotal power requirement 5.0 kWmachine weight approx. 1.25 tdimensions L x W x H 1.8 x 1.7 x 1.8m
Van VW Caddy 1.6 TDI, amtl. Kennz. GÖ-EG 60, EZ 22.10.2015, 201.280 abgl. km (18.11.25), 1.598 cm³ diesel, 75 kW, EURO5, VIN: WV1ZZZ2KZGX044382, exterior color white, steel rims, portal doors rear, sliding door right, 5-speed gearshift, fabric upholstery anthracite, navigation, air conditioning, interior not cleaned, tires partly worn, traces of use, 2 keys, vehicle documents available, WITHOUT the dog box!, HU 12/26
Universal milling machine- Digital display- Chip protection- Coolant system- Machine light- Chip trayx-travel 560 mmy-travel 300 mmz-travel 420 mmTable size 1055 x 240 mmSpindle holder ISO Sk 40Spindle speeds 40 - 1550 rpmTotal power requirement 5.5 kWMachine weight approx. 1.3 tDimensions L x W x H 1.6 x 1.5 x 1.85 m Auction-ID: A7-44032-401
Power: 22 kW Condition: Used – CE marked Control system: Fanuc Series Oi-MC Electrical: 400 V / 50 Hz / 100 A Technical observations: - Arm-type automatic tool changer - Operational operator panel and display - Interior enclosure with coolant residue and grime - T-slot table shows light surface corrosion - Machine exterior has paint wear and surface peeling Application: Capable CNC machining center suitable for industrial part production with standard automation features. Auction-ID: A7-40830-1
\"serial number, diagram number 956.71.80.276 MIKRON WF 2/3 DPM Universal tool milling machine point + distance control Heidenhain TNC 125 quill stroke 110 mm, speed range 25 - 2500 rpm, milling head rotatable by approx 90° displacement paths X/Y/Z 400/400/400 mm tool holder ISO 40/M16 Universal table 700 x 400 mm rigid table 800 x 450 mm, counter holder for horizontal spindle, vice, 5 x horizontal spindle, coolant system, tool holders SK40 dimensions 3500 x 2400 x 2000 mm weight approx. 2200 kg \" Auction-ID: A7-40830-2
Surface grinding machine - machine feet documentation Grinding length 600 mmGrinding width 250 mmWorkpiece height 500 mmTable clamping area 600 x 200 mmGrinding wheel dimensions 220 mmGrinding spindle speed 1400 / 2800 rpmTotal power requirement 2.0 kWMachine weight approx. 1.5 tSpace requirement approx. 1.4 x 1.2 x 1.9 m Auction-ID: A7-44032-402
Guide and tension spindle latheThree-jaw chuck 200mmMultifix steel holder size B3 pcs. Multifix cassettesEmergency stop deviceTurning diameter over bed 370 mmTurning diameter over support 200 mmTurning length 1000 mmCenter height 185 mmSpindle bore 56 mmTailstock quill holder MK 4Speed 50 - 2000 rpmDrive power 4.0 kWMachine weight approx. 1.4 tDimensions approx. 2.3 x 1.1 x 1.3 m Auction-ID: A7-44032-403
Power: 2,000 W CW Fiber Laser; λ 1,064 nm; upgrade-ready 500–18,000 W Operating parameters: Max. speed 120 m/min; positioning repeatability ±0.02 mm; auto Z-axis height ctrl. (BCS100 V3.0); auto central lubrication Workpiece capacity: 2 exchange tables 3,050 x 1,550 mm each; double-bed system; machine dim. L 7,850 x W 2,350 x H 1,950 mm Supported edges: Steel, stainless steel, Al, Cu, brass & other metals (fiber laser cutting) Edge types: High-precision 2D metal cutting; contour + nesting operations Included equipment: Laser source (Raycus/Max/IPG); Raytools cutting head w/ auto focus; servo motors (Schneider/Yaskawa) – Y: 2x 2,000 W (dual drive), X: 1x 1,000 W, Z: 1x 400 W; planetary reducers Apex (USA); linear guides HIWIN; CypCut control + nesting software; wireless remote; Hanli HL-3000 chiller (laser + head) Compliance: Industrial CNC fiber laser system; CE N/C Power suppl ...
Drilling/milling machine with:• Tapping device• Cross table with adjustable guides• Drilling quill feed• Manual gearbox• SK 40Drilling capacity in steel 40 mmThroat depth 275 mmDrilling stroke 120 mmSpindle holder MK 4 Speed range 75 - 3200 rpmTable adjustment transverse 190 mmTable adjustment longitudinal 490 mmTable clamping surface 700 x 210 mmConnection voltage 400 VMilling cutter diameter max. 80 mmTotal power requirement 1.1/1.5 kW Condition: never used / new (5) Auction-ID: A7-44032-404
The machine comes with a complete set of equipment, which is also quite valuable, e.g., the heads can also be used on other machines. Auction-ID: A7-40830-4
Serial number: 5057657 Condition: Used Total runtime: 38,180 hours Unit type: Smartblock 50 – Combined Heat and Power (CHP) system Engine: Natural gas-powered generator Performance: - Electrical output: 49 kW - Thermal output: 85 kW - Engine rating: 54 kW (72 BHP) - Engine speed: 1,500 rpm - Operating temperature: 25 °C - Installed altitude: 100 m Dimensions (L × W × H): 2.24 × 0.96 × 1.73 m (insulated housing) Included: - Electric control cabinet - Full integration hardware for thermal network Application: High-efficiency, simultaneous heat and power generation for industrial, municipal, or commercial energy systems. Auction-ID: A7-40830-5
Mitre band saw - semi-automatic - double mitre - material detection when lowering - incl. 7 pieces saw bladesCutting diameter 260 mmSaw blade length 3340 x 27 x 0.9 mmCutting range at 90 degrees: square 260 mmCutting range at 90 degrees: flat 380 x 260 mmBlade speed 37 / 74 m/minSaw motor 1.5 kWMachine weight approx. 0.62 tDimensions approx. 1.7 x 1.4 x 1.3 m Auction-ID: A7-44032-405
Mitre band saw - semi-automatic - double mitre - material detection when lowering - incl. 7 pieces saw bladesCutting diameter 260 mmSaw blade length 3340 x 27 x 0.9 mmCutting range at 90 degrees: square 260 mmCutting range at 90 degrees: flat 380 x 260 mmBlade speed 37 / 74 m/minSaw motor 1.5 kWMachine weight approx. 0.62 tDimensions approx. 1.7 x 1.4 x 1.3 m
5x Erickson / 6348720 / PSC63NUCR16 5x Erickson / 6348718 / PSC63NVHCR16 Auction-ID: A7-40830-11
5x Erickson / 6348918 / PSC63S16FNER2 5x Erickson / 6348917 / PSC63S12ENER2 Auction-ID: A7-40830-12
Underfloor aluminium circular saw - hydropneumatic semi-automatic pneum. Workpiece clamping device- Roller conveyor with material stop, length 3m- Feed roller conveyor, length 3mMachine color is blue!! Saw blade diameter 450 mmCutting range at 90 degrees: around 130 mmCutting range at 45 degrees: around 100 mmCutting range at 90 degrees: flat 210 x 170 mmCutting range at 45 degrees: square 145 x 170 mmSpeed 2900 rpmTotal power requirement 2.3 kWMachine weight approx. 600 kgDimensions L x W x H 4.0 x 1.5 x 1.5 m Condition: never used / new (5) Auction-ID: A7-44032-412
Underfloor aluminium circular saw - hydropneumatic semi-automatic pneum. Workpiece clamping device- Roller conveyor with material stop, length 3m- Feed roller conveyor, length 3mMachine color is blue!! Saw blade diameter 450 mmCutting range at 90 degrees: around 130 mmCutting range at 45 degrees: around 100 mmCutting range at 90 degrees: flat 210 x 170 mmCutting range at 45 degrees: square 145 x 170 mmSpeed 2900 rpmTotal power requirement 2.3 kWMachine weight approx. 600 kgDimensions L x W x H 4.0 x 1.5 x 1.5 m Condition: never used / new (5)
10x Erickson / 6303121 / PSC63TTGL18085M 6x further Auction-ID: A7-40830-13
Equipment:- Digital display- Coolant system- Huron milling head- Emergency stop device- Documentationx-travel 710 mmy-travel 250 mmz-travel 400 mmTable size 1200 x 300 mmControl conventionalMounting SK40Speed range 50 - 2500 rpmTotal power requirement 2.2 kWMachine weight approx. 1.7 tDimensions L x W x H 2.1 x 2.0 x 1.6 m Auction-ID: A7-44032-413
Drilling and milling machines:digital depth and speed display,2 gear stageswith fine adjustment and variable speed,including left-right switchleft and right swivel headSupplied with associated toolsDrilling capacity in steel 25 mmprojection 170 mmDrilling stroke 50 mmCapacity finger milling machine 16 mmSpindle holder MK 2 Spindle speeds 50 - 3000 rpmTable adjustment transverse 280 mmTable adjustment longitudinal 155 mmTable clamping area 500 x 180 mmConnection voltage 230 Vmax. distance between work table and spindle nose max. 320 mmTotal power requirement 0.8 kWMachine weight approx. 150 kgDimensions approx. 670 x 550 x 910 m Condition: never used / new (5) Auction-ID: A7-44032-414
Seller: Troostwijk Auctions
2.900 €
