Manufacturer:
(Category: 108)
Auction-ID: A7-42447-277
Inv. Num. : 6169 Type: Motoman DX 100 Producer: YASKAWA Created: 2011 Parameters: Switch-on hours: 12800 h Operating hours: 6000 h Axle number: 6 Max. horizontal reach: 1717 mm Min. vertical reach: 3063 mm Maximum load: 20 kg
Plasma cutting machine Manufacturer: Swift Cut Type: Pro 3000 Year of Make: 2022 Travel paths X/Y: 3,000 x 1,500 mm Power Source: Hypertherm Powermax65 SYNC Sheet thickness mild steel max.: 16 mm Sheet thickness stainless steel (VA) max.: 12 mm Sheet thickness aluminium max.: 12 mm Table length: 3,000 mm Working width: 1,500 mm Table width: 1,500 mm
CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Compact 3001.15P Year of manufacture: 2023 CNC control Working area: 1,500 x 3,000 mm 1 x Plasma torch with power source Hypertherm Powermax 45 Air Plasma System Aigner filter system Available: March 2026
Bystronic Bystar 4020 Year of construction : 2008 4.4 KW in 2018 completely overhauled by Bystronic At that time, a glass overhaul was carried out and the turbine was replaced by a magnetically bearing turbine. Electrified.
Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2280/1060/40 mm -Table height: 960 mm -with supporting ribs -Cast iron plate -Weight: 1050 kg
Offer 26610 Technical data : - All measurements are estimated - Working range / adjustment range horizontally approx. 3 m - Working range / adjustment range vertically approx. 3 m - Mast height approx. 5 m - Lift drive infinitely variable - Welding feed infinitely variable - Control panel with control + control cabinet + wiring - Welding source STARMATIC 1003 DC up to 1000 A - Welding mast STEITZ - UP – powder – boiler - Mot. Rail running gear for floor-mounted rails - Running rails floor-mounted approx. 25 - 30 m - Connection 400 V
CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of Make: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with power source Hypertherm XPR300 incl. Optimix gas console 1 x drilling spindle 26 kw to 40 mm diameter, incl. 8-fold tool changer 1 x preparation for retrofitting a rotator (for bevel cuts) 1 x nesting program on the CNC control Availability: May 2026
Key data: 6000 m³/h
Extraction tower Kemper , type: 390600 , room ventilation system 6000m3/h, Total filter area: 60m2, filter ePTFE membrane Dimensions Dia 1172, H- 3620mm, 760kg
: neu : ca. 4 Wochen ab Auftragse : 1940 €: 2000 x 1000 mm: 850 mm: 449 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capacity 50 ...
Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device, welding rotary tilting table -Manufacturer: Gieseking, Motorized welding rotary and tilting table -Type: SD 1 -Load capacity: 1 ton -Rotational movement: electrically continuously adjustable 0-1 rpm -Faceplate: Ø 1010 mm -Three-jaw chuck: Ø 290 mm, bore Ø 74 mm -Faceplate: motor-tiltable -Transport dimensions: 1750/1170/H1620 mm -Weight: 1392 kg
Ground cable for MIG/MAG welding machine, electrode welding machine, welding cable extension, MMA welding cable -Welding cable: Ground cable for MIG/MAG welding machine, electrode welding machine -Version: Dinse plug -Length: 10 meters -Weight: 5.7 kg
Ground cable for shielding gas device, electrode device, stud welding device-Welding cable: extension / connection cable-Length: 8.0 m-Connector: 5-pin-Transport dimensions: 460/450/H80 mm-Weight: 3.8 kg
Ground cable for shielding gas device, electrode device, stud welding device-Welding cable: extension / connection cable-Length: 10.0 m-Connector: 14/8-pin, see photos-Cable coupling: DIX SK 70-Transport dimensions: 460/450/H80 mm-Weight: 9.2 kg
Max. profile width at 180°: 220 mm Max. profile height: 210 mm Angle adjustment range: 30°-180° Welding level: 340 x 300 mm
table length: unterschiedlich mmtable width: unterschiedlich mmtable height (lateral area): unterschiedlich mmweight: ca. 240 kgDescription :- Special set for SIEGMUND 28 clamping tables- original SIEGMUND accessories () included :- 1x 28 mm mobile tool trolley- 30x quick release bolts with short twist lock- 8x universal stop 150 L - nitrided- 4x universal stop 225 L - nitrided- 8x stop and clamping angles 175 L - cast- 2x stop and clamping angle 500 G left - nitrided- 1x stop and clamping angle 750 G left - nitrided- 1x stop and clamping angle 750 G right - nitrided- 1x stop and clamping angle 500 G left - nitrided- 1x stop and clamping angle 500 G right - nitrided- 4x stop and clamping angles 300 G left - nitrided- 8x prism Ø60-135° burnished- 16x Professional screw clamp - Nitrided- 6x Professional screw clamp 45°/90° - Nitrided- 4x universal stop 300 - nitrided- 1x accessory set ...
A complete Severt robotic welding system is available. Travel path X: 8000mm, robot axes: 6, stations: 2, axis positioners: 2, positioner speed: 6rpm, positioner load capacity: 1000kg, faceplate torque: 1000Nm, power source: OTC DP 500, power output: 350A. Including seam tracking sensor, push-pull torch, hose packages, wire guide spirals, contact tips, gas nozzles and additional items. Documentation vorhanden. On-site inspection is possible.
: neu : ca. 2 - 4 Wochen ab Auftr : 449 €: 16 mmTool trolley for accessories 16mm system, mobileTools are not included in the price.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC laser cutting system Trumpf including RotoLas and Liftmaster is available. Laser source: TruFlow 5000, laser type: CO2 laser, laser power: 5000W, travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness structural steel/stainless steel/aluminium: 25mm/25mm/15mm, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm, max. axis speed: 200m/min, max. simultaneous speed: 300m/min. Machine dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12000kg, operating hours: 55462h, laser hours: 24430h, beam hours: 12742h. Hours status as of 01/2026. Documentation available. On-site inspection is possible. Expected to be available from January 2027.
Offer 25396 Technical data: - Load capacity 250 kg - Face plate diameter 600 mm - Table height in horizontal position 910 mm - Face plate can be infinitely swivelled by hand crank - Face plate speed electr. infinitely variable 0.2 - 2 rpm - Welding current transmission 300 A - Drive 220 V - Right + Left - Run - E. footswitch - Space requirement approx. W 800 x H 910 x D 1200 mm - Weight approx. 150 kg
Flame cutting system, torch, oxyfuel cutting system -Shaft diameter: 30 mm -Shaft length: 220 mm (260 mm with socket) -Total length: 405 mm -for: 16 mm nozzle diameter -Weight: 1.3 kg
KUKA KR 8 R2100-2 arc HW robotic welding station was built in 2021 in Germany by KUKA Deutschland GmbH. The system is designed for precision welding of workpieces with even the most complex geometry. All the necessary components are integrated inside the modular design, enabling the workstation to be adapted accordingly to current production needs. The workpiece welding process is performed by a KUKA 6-axis robot from the KR CYBERTECH ARC series. The machine is distinguished by its compact design, which provides a high degree of movement freedom even in hard-to-reach places. To avoid any collision of cables with other station components, they were routed inside the robot arm. All this is complemented by an easy-to-use controller with a range of additional functions. During automated welding, dynamic and accurate feeding of the welding wire is very important. To achieve this, a reli ...
Welding fume filters, welding fume extraction systems, soldering fume extraction systems, small dust collectors, mobile filter units, mobile welding fume extraction filter devices, welding fume extractors -Manufacturer: Kemper, mobile welding fume extraction system type 62150 -Drive: 1.5 kW -Volume flow rate: 1000 m³/h -Extraction arm: Ø 155 mm x 4200 mm -Transport dimensions: 770/690/H1455 mm -Weight: 186 kg
MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose assembly: Gas-cooled -Length: 3.5 m -Transport dimensions: 430/360/H85 mm -Weight: 3.2 kg
MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.4 m -Transport dimensions: 430/400/H100 mm -Weight: 3.5 kg
MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.5 m -Transport dimensions: 420/380/H80 mm -Weight: 4.4 kg
TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8 m -Tuchel connector: 5-pin -Weight: 3.7 kg
MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 3.5 m -Transport dimensions: 400/360/H80 mm -Weight: 3.5 kg
Extraction and filtration of aerosols Manufacturer: United Air Specialists Type: Mena 2000 Com. 13051 P: 1.5 kW Vmax: nom. 1700m³/h pg: 1500 Pa U: 400 V F: 50 Hz I: 3.3 A tmax: 65 C More items - new and used - can be found in our shop! International shipping costs on request!
Surplex GmbH
250 € 
