Manufacturer:
(Category: 108)
Protection level: 9 - 13 MPower supply: 2 x CR2032 3Vweight: 460 Grammdimensions: 250 x 270 x 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
volume capacity: 2500 m3/h0: 3000 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,08 tdimensions of the machine ca.: 0,58x0,58x0,58 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1000 mmtable load: 0,6 tswivelling range: 0 - 90 Gradturning speeds: 0,1 - 1,25 U/minmax. torque on the faceplate: 900 Nmtable pass: 200 mmwelding current: 500 Amperetotal power requirement: 0,37 + 0,75 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 tworkpiece diameter: 100-2500 mmgear diameter: 250 mmgear width: 140 mmtotal power requirement: 0,8 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,0 x 1,4 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,55 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 11.5 - 13.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,parallel hole arrangement in a 25 mm grid on the sides.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1000 mmtable height: 850 - 900 mmweight of the machine ca.: 0,45 tWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T = 15The surface is untreated.Sidewalls 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.including floor storageAccessories optional Surface flatness 0.2 - 0.4mm on 1000mm.Very sturdy base, so theTable can be moved with a pallet truck.The accessories shown are optional!Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 1,5 tdimensions: 3,0 x 1,5 x 0,9 mWelding table SIEGMUND Professional Extreme 850 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 850 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table top,parallel hole arrangement in 50 mm grid on the sides.Including basic equipment. Accessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,99 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIEGMUND Professional Extreme 850 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 850 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table top,parallel hole arrangement in 50 mm grid on the sides.Including basic equipment. Accessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 1,5 tdimensions: 3,0 x 1,5 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,99 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,8 tdimensions: 3,0 x 1,5 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 11.5 - 13.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,parallel hole arrangement in a 25 mm grid on the sides.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 55 Positionen: 16 mmcondition: neu weight: 23 kgSet 2 55 pieces, 16mm system, consisting of:Clamps: 6 x 160610Clamps: 2 x 160630Prism: 4 x 160645.1.NBolt: 18 x 160511Stop: 4 x 160410.NStop: 6 x 160420.NAngle: 6 x 160108.NAngle: 6 x 160110.NAngle: 2 x 160162.NAccessory set. 1 x 163999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,3 tdimensions: 1,0 x 1,0 x 0,85 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 17-19.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,Side walls 150mm with parallel hole arrangement in a 25 mm grid.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.Other dimensions available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Protection level: 9 - 13 MPower supply: 3 Voltweight: 2 kgdimensions: 300 x 240 x 240 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
welding current: 10 - 180 Aopen-circuit voltage: Vconnected load frequency: 230 Vweight: 6,8 kgDimensions (LxWxH): 403 x 153 x 264 mmAccessories for inert gas welding machine:Hose package 4m.Earth cable 4m Accessories for inert gas welding machine:Hose package 4m.Ground cable 4mWelding wire 1 roll,Pressure gaugeWelding wire 1 roll,Pressure gaugeWith nozzle and gas nozzleList price: 2200, -EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Protection level: 4 - 12 MPower supply: 2 x CR2032 weight: 460 Grammdimensions: 250 x 270 x 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 450 mmtable load: waagerecht 300 Kgtable load: senkrecht 150 Kgtable turning speeds: 0,2- 2 U/minvoltage: 230 V / 50 Hztotal power requirement: 0,55 kWweight of the machine ca.: 80 KGdimensions of the machine ca.: 0,65 x 0,5 x 1,0 m• unused stock machine• manual tilt adjustment• Start-Stop by foot switch• with CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 590 mmtable width: 590 mmtable load: 200 Kgtable turning speeds: 0,23 - 2,3 U/mintable height: 650 mmtotal power requirement: 0,55 kWweight of the machine ca.: 600 KgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
manually operated, air-cooled Rated power at 50%ED: 2.4kVA Short circuit current: 7.5kA Electrode force max.: 180daN Projection: 250mm --- equipped with: - 5m connection cable - Standard electrode arms 250mm Control RS15 (optional) --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
specifications: - Welding current 300 A 60% ED - 230 A 100% ED - Welding current adjustable from 10 A to 300 A - Current consumption 400 V / 19.5 A / 10.7 kVA - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 600 x H 900 x D 1000 mm - Weight approx. 180 kg
Layer-reeled solid wire for welding under inert gas in all positions. Shielding gas types: Ar, CO2 / Ar, CO2, O2 / CO2. Welding wire roll MAG wire electrode, unused, original shrink-wrapped in foil, ovp in cardboard! 15kg 1.2mm Manufacturer Union Type A600IG Probably for deposition welding Multiple available. For complete acceptance special price! Special price!
specifications: - Welding current 315 A 80% ED - 280 A 100% ED - Welding current adjustable from 50 A to 315 A - Current consumption 400 V / 19.5 A / 10.7 kVA - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 600 x H 900 x D 1000 mm - Weight approx. 200 kg
Rated power at 50%ED: 35kVA Short circuit current: 19kA Electrode force: 300daN / single stroke Projection: 395mm --- Welding control: WS 708 (7 times, 8 program) --- Incl. additional options: - Foot switch - Pressure-free lowering of the upper fitting - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
cutting range for steel to: 76 mmcapacity at 100%: 51 mmcutting medium: 400 Ampregulated drive: 50-150 und 100 - 400 AmpSteuerSteuercontrol voltage: 24 Voltweight of the machine ca.: 750 kgdimensions of the machine ca.: 82 x 122 x 930 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1300 mmtable load: 7.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M24 Tilt Angle: 90-180-100 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 3.050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 960 mmtable load: 3.500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M20 Tilt Angle: 70-90-180 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 1.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 715 mmtable load: 500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-110 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 675 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 33 Positionenweight: 52 kgcondition: neu : 28 mmP-Set 1:27 pieces, 28mm system (15mm), consisting of:Clamps: 5 Sk. 100 / 350mmStop: 2 pieces 500mmStop: 2 pieces 150mmAngle: 2 pieces 175 x 175mmFlat angles: 2 pieces. 350 x 250mmFlat angles: 2 pieces 275 x 150mmEccentric discs 2 pcs. 100mmQuick release bolts: 10 pcs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine type bolt welding system Make SOYER Type BMS-8N Connection voltage 1 x 230 volts Welding range M 3 – M 8 3 – 7.1 mm Ø Material steel, stainless steel, Aluminium, brass Welding process peak ignition According to DVS leaflet 0903 Current setting infinitely variable Welding time 1,000 – 3,000 ms Welding sequence 20 bolts / min., depending on the bolt diameter Pistol positioning welding pistol Dimensions W x H x D 320 x 300 x 120 mm Hedging 16 amps Weight 10 kg Age 12 months Condition workshop tested, as new, incl. UVV test report Scope of delivery bolt welding device with the following accessories: 1 piece welding gun PS-1K 2 pieces ground cable 3 mtr. long 1 piece transport case 1 piece user manual Warranty 24 months from the date of delivery List original price 2.490,00 € + VAT Price kpl. with above a ...
Machine type MIG/MAG welding system Make OERLIKON Type Citomag 506 W Connection voltage 3 x 400 volts Adjustment range 30 - 500 Ampere Switching time 60 % ED at 500 amps 100% ED at 420 amps Current setting infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed gearbox gearboxed 4-roll gearbox Protection up to a maximum of 300 A = 32 A over 300 A = 63 A Dimensions L x W x H 1,050 x 630 x 1,050 mm Weight 237 kg Age approx. 20 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box kpl. Equipped 1 piece user manual ...
WMT GmbH & Co. KG
