Manufacturer:
(Category: 108)
Laser power: 4000W (4kW), wavelength: 1030nm, beam quality (BPP): 8mm/mrad, beam diameter setting: 0.1µm, machine dimensions X/Y/Z: approx. 1000mm/1600mm/1600mm, weight: approx. 1000kg. Including 2x scanner optics (PFO) for the process cells, 3x fiber optic cables and spare parts. Documentation available. On-site inspection is possible.
Manufacturer / Type: MicroStep SPL-PA 6001.25 + S500 Processing area: 6,000 x 1,500 mm + 500 mm shaft Drive: double-sided backlash-free DC servo drive Guide system: Linear guides Positioning speed: up to 44,000 mm/min Repeatability: according to DIN 28206 / IRC 2500 Control: MicroStep iMSNC incl. touch control panel and software Kjellberg HiFocus 160i Current range: 10 – 160 A Operating voltage: 400V, 3~50Hz Power: 33 kVA Gases: air, oxygen, nitrogen, argon, hydrogen Donaldson DFPRO 6 Cyclopeel – automatic filter cleaning Separation efficiency: 99.999 % at 0.5 μm Extraction volume: 4,500 m³/h Low noise (< 75 dB(A)) Including oil/water separator and software connection
Welder Manufacturer: Merkle Type: HighPulse 552 RS Year of Make: 2019 Water cooling Wire feeder and torch incl. Binzel shut-off fuse
used
Welding current at 25% ED max.: 250 A Welding current at 100% ED: 110 A Welding current step-by-step. Adjustable: 5 - 250 A electr. Connection: 380 V Space requirement: 650 x 600 x 1100/1500 mm high Weight: 55 kg
for sale is a MIG -MAG welding machine from Ess Schweißtechnik Bad Waldsee, HV 8534, Subject to prior sale, changes and errors!
Rated power: 63 kVA Projection: 520 mm Electrode arm spacing: 200 mm Welding capacity steel: approx. 7 + 7 mm Welding performance of non-ferrous metals: approx. 2 + 2 mm electr. Connection: 380 V kW
Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Ess Type SquareARC 306 AC/DC Connection voltage 3 x 400 volts Adjustment range 5 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 230 amps Current adjustment infinitely variable max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 16 ampere slow blow Dimensions L x W x H 950 x 435 x 980 mm Weight 120 kg Age approx. 10 years estimated without obligation Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG welding torch WHW 20/Z, DD 12 mtr. long 1 piece ground cable 50 sqmm, 8 mtr. long 1 piece pressure reducer 1 piece spare parts box complete E ...
Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible.
number: 70 Positionenweight: 90 kgcondition: neu : 28 mmWMT Set 7: 70-piece, 28mm system, consisting of:3x Pipe clamps D28 90° – Item No. 40283973x Pipe clamps D28 180° – Item No. 40283963x Pipe clamps D28 45° – Item No. 40283983x Pipe clamps D28 300x150 – Item No. 40283993x Pipe clamps D28 300x200 – Item No. 402840015x Ball lock pins D28x50 – Item No. 402766310x Locking pins D28x80 – Item No. 40288764x Universal Stop D28 100x50x25 mm – Item No. 40284694x Universal Stop D28 150x50x25 mm – Item No. 40284704x Universal Stop D28 225x50x25 mm – Item No. 40276572x Universal Stop D28 300x50x25 mm – Item No. 40276592x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 40286572x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 40286582x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 40286492x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 40286522x Stop ...
A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible.
Offer 05394 Specifications: - BIA tested sweat extraction device - Joint extraction arm 3000 mm - Air volume flow approx. 1000 m³/h - max. static pressure 2700 pa - Filter area approx. m² - Filter control - light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg
Offer 24587 Specifications: - Electrostatic filter with indicator light - Extracted and purified air is returned to the working area - Wall-mounted design with two articulated extraction arm - Articulated suction arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter area 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg
number: 31 Positionen: 22 mmcondition: neu weight: 43 kgSet 1 33-piece, 22mm system, consisting of:Clamps: 4 x 220610.1Clamps 2 x 220630.1Bolt: 12 x 220511Stop: 4 x 220410.NStop: 4 x 220420.NAngle: 2 x 220110.NAngle: 2 x 220152.NAccessory set. 1 x 223999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 96 Positionenweight: 600 kgcondition: neu : 28 mmSpecial set 96 pieces, 28mm system, consisting of:1x tool trolley30x quick release bolts with twist lock short, without O-rings8x universal stop 150 L - nitrided4x universal stop 225 L - nitrided8x stop and clamping angle 175 L - cast2x stop and clamping angle 500 G left - nitrided1x stop and clamping bracket 750 G left - nitrided1x stop and clamping bracket 750 G right - nitrided1x stop and clamping bracket 500 G left - nitrided1x stop and clamping bracket 500 G right - nitrided4x stop and clamping angle 300 G left - nitrided8x prism Ø60-135 ° burnished - with collarcomplete with screw collar and countersunk head16x professional screw clamps - nitrided6x Professional screw clamp 45 ° / 90 ° - nitrided4x universal stop 300 - nitrided1x accessory set consisting of:Eccentric, Allen key, brush, sharpening stone, Probe CleanBasic, ...
table diameter: 1000 mmtable load: 1200 Kgswivelling range: 0 - 135 Gradturning speeds: 0,1 - 1,0 U/minheight adjustment: 1000 - 1450 mmmax. torque on the faceplate: 2000 Nmengine output: 0,75 / 0,55 kWwelding current: 500 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.Welding power transmission for max.500Ampere.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 780 mmtable load: 1,0 tswivelling range: 0 - 135 Gradturning speeds: 0,15 - 1,5 U/mintable height adjustment: von 780 bis 1560 mmmax. torque on the faceplate: 1000 Nmwelding current: 500 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 33 Positionenweight: 52 kgcondition: neu : 28 mmSet 1: 33 pieces, 28mm system, consisting of:Clamps: 4 x 280610.NClamps: 2 x 280630.NPrism: 2 x 280648.1.NBolt: 12 x 160511Stop: 4 x 280410.NStop: 4 x 280420.NAngle: 2 x 160110.NAngle: 2 x 280152.NAccessory set. 1 x 283999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 150 tworkpiece diameter: 1000 - 6300 mmdrum diameter: 500 x 300 mmfeed: 100 - 1000 mm/mintotal power requirement: 8 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 560 mmtable load: 0,3 tswivelling range: 0 - 90 Gradturning speeds: 0,25 - 4,0 U/min: 360 Nmwelding current: 500 Amperetotal power requirement: 0,4 / Hand kW• Self-locking gear, therefore no forward and backward at eccentric Load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1400 mmtable load: 5 tswivelling range: 0 - 135 Gradturning speeds: 0,05- 0,5 U/mintable height adjustment: von 1100 bis 1950 mmmax. torque on the faceplate: 7000 Nmwelding current: 700 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 37 Positionen: 28 mmcondition: neu weight: 29 kgBasic set 1 37 pieces, 28mm system, consisting of:Clamps: 4 x 280604Bolt: 8 x 280511Stop: 6 x 280420.NAngle: 2 x 280110.GThreaded bolt 8 x 280543Stop 8 x 160415Accessory set. 1 x 163999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 3000 kgworkpiece diameter: 20 - 1500 mmdrum diameter: 100 x 200 mmconnected load frequency: 230 Vtotal power requirement: 0,12 kWdimensions: 0,8 x 0,37 x 0,36 mspeed: 100 - 1000 mm/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,64 tdimensions: 2,4 x 1,2 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional Surcharge for 25mm material thickness: 340, -EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 tworkpiece diameter: 100-2500 mmgear diameter: 250 mmgear width: 140 mmtotal power requirement: 0,8 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,0 x 1,4 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10 tworkpiece diameter: 100 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 0,55 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10 tworkpiece diameter: 100 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 0,55 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 850 - 900 mmweight of the machine ca.: 0,65 tdimensions: 2,4 x 1,2 x 0,95 mWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side panels 165mmBottom ribbed for reinforcement.Incl. floor bearingAccessories optionalSurface evenness 0.2 - 0.4mm over 1000mm.- with drawer unit- Grid shelf- Heavy-duty castors steerableWelding accessories shown not included!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mmtable width: 800 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,19 tdimensions: 1,2 x 0,8 x 0,85 mSiegmund workstation including 2 drawersPremium Light, through hardened tool steel X8.7,plasma nitrided and BAR coated.Drilling Ø 28 mm, drilling surface 100x100 mm grid.Material thickness approx. 15 mmWith the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop!Consisting of:1x 004002 (Siegmund Workstation)1x 804004.X7 (perforated plate)1x 284030 (clamp holder)1x 004020 (shelf)1x 284035 (bolt and prism holder)1x 004025 (tool wall including shelf)2x 004210 (drawer)Spacer ring 800653.N is required for clamping with bolts 280510/280511. ...
number: 10 Stk.clamping range: 15 - 50 mm: 28 mmweight: 10 kgdimensions: 0,3 x 0,3 x 0,2 mBasic set 4 / 53 piecesfor table top thickness 15mm and 25mm6 pcs screw clamps14 pcs. quick clamping bolts2 pcs. universal stop 100mm6 pcs. universal stop 150mm6 pcs. universal stop 225mm2 pcs. universal stop 300mm6 stop and clamping angles 175mm4 stop and clamping angles 275mm2 pcs. prisms 60mm1 piece torch holder1 pc. Eccentric stop 100mm diameter1 piece perforated brush 30mm2 pieces separating lotion 500ml, on a natural, biological basis2 pcs. Welding table cleaner 500ml, on a natural, biological basisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
