Manufacturer:
(Category: 108)
One used complete mesh welding line from SCHLATTER. This MG305 works from line wire off spools and pre straightend cross wires. This machine is very complete, from line wire pay offs to the automatic turning and stacking unit for meshes up to 8.000mm This MG305 can weld up to 10mm and do have 100 and 150mm equipment. For the production of the cross wires is a good VITARI straightening and cutting machine availible For this line a big spare part package is availible as well and a lot equipment as: Spools ( 3 ton ) Butt welder Mesh Package Lifter Automatic Mesh Package Tyning System Compressor Main Transformer etc..
Offer 25188 Specifications: - Welding current adjustable 20 A - 225 A - Separate wire feeder case with between package 6 m - 2 roller wire feeder infinitely variable - 2 stroke + 4 stroke regulation - Air-cooled hosepack approx. 4 m - Ground cable -Reducer - Connection 400 V - Space requirement approx. W 750 x H 1500 x D 1100 mm - Weight approx. 120 kg
Laser power: 4000W (4kW), wavelength: 1030nm, beam quality (BPP): 8mm/mrad, beam diameter setting: 0.1µm, machine dimensions X/Y/Z: approx. 1000mm/1600mm/1600mm, weight: approx. 1000kg. Including 2x scanner optics (PFO) for the process cells, 3x fiber optic cables and spare parts. Documentation available. On-site inspection is possible.
Wire electrode, welding wire, welding wire -Material: stainless steel -Welding wire: 307 -Diameter: 0.8 mm -Quantity: 1 roll 15 kg 1 roll approx. 5 kg -Price: complete -Dimensions: Ø 300/100 mm -Weight: approx. 21 kg
A robot-based waterjet cutting system without a high-pressure pump is available. 1) Industrial robot ABB IRB 6600 M2004, axes: 6, load capacity: 175kg, reach: approx. 2800mm, repeat accuracy: +/-0.05mm, robot weight: approx. 1750kg. 2) Water basin catcher TF3020, working area X/Y: 3000mm/2000mm, basin dimensions X/Y/Z: approx. 3150mm/2150mm/700mm. 3) High-pressure cutting head, reaction time: 0.1s, operating pressure: 400MPa (4000bar), weight including collimation tube: approx. 1500g. 4) 3D collimation tube extension for pure water operation. 5) 1/4 inch HD filter MF4-56, filter insert: 56µm, connection type: HP4, operating pressure: 450MPa (4500bar). 6) Complete high-pressure piping of the robot. 7) Pneumatic components for controlling the cutting valves and metering slides. 8) High-speed motor. 9) Protective housing for the entire robot system, parapet height: 1090mm, wall thickness: ...
Manufacturer / Type: MicroStep SPL-PA 6001.25 + S500 Processing area: 6,000 x 1,500 mm + 500 mm shaft Drive: double-sided backlash-free DC servo drive Guide system: Linear guides Positioning speed: up to 44,000 mm/min Repeatability: according to DIN 28206 / IRC 2500 Control: MicroStep iMSNC incl. touch control panel and software Kjellberg HiFocus 160i Current range: 10 – 160 A Operating voltage: 400V, 3~50Hz Power: 33 kVA Gases: air, oxygen, nitrogen, argon, hydrogen Donaldson DFPRO 6 Cyclopeel – automatic filter cleaning Separation efficiency: 99.999 % at 0.5 μm Extraction volume: 4,500 m³/h Low noise (< 75 dB(A)) Including oil/water separator and software connection
current capacity: 13,10 kVAnumber of controlled axis: 6 Payload: 16,00 kgRobot: REIS - SRV16L A1 - axis: 120 °A2 - axis: 195 °A3 - axis: 270 °A4 - axis: 360 °A5 - axis: 246 °A6 - axis: 720 °Welding manipulator: REIS - RDS26 workpiece weight: 2.600 kgRotating speeds: 50 °/sek.table rotating: 360 °table swivelling +/-: 180 Gradslewing speed: 15 °/sek.welding unit: FRONIUS wire dia.: 0,80 - 1,60 mmWire speed: 0,50 - 22,00 m/minControl: total power requirement: 20,00 kWweight of the machine ca.: 18,00 tdimensions of the machine ca.: 10,00 x 4,00 H4,00 m2-station welding cell with- REIS SRV16L vertical articulated arm welding robot- RobotStar V control unit- 2x REIS RDS26 welding turntable- Welder FRONIUS TransPulsSynergic 5000 with cooling unit- Wire-feed-unit FRONIUS 4R/W/E RoboterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Welder Manufacturer: Merkle Type: HighPulse 552 RS Year of Make: 2019 Water cooling Wire feeder and torch incl. Binzel shut-off fuse
used
Welding current at 25% ED max.: 250 A Welding current at 100% ED: 110 A Welding current step-by-step. Adjustable: 5 - 250 A electr. Connection: 380 V Space requirement: 650 x 600 x 1100/1500 mm high Weight: 55 kg
for sale is a MIG -MAG welding machine from Ess Schweißtechnik Bad Waldsee, HV 8534, Subject to prior sale, changes and errors!
used
Rated power: 63 kVA Projection: 520 mm Electrode arm spacing: 200 mm Welding capacity steel: approx. 7 + 7 mm Welding performance of non-ferrous metals: approx. 2 + 2 mm electr. Connection: 380 V kW
Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Ess Type SquareARC 306 AC/DC Connection voltage 3 x 400 volts Adjustment range 5 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 230 amps Current adjustment infinitely variable max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 16 ampere slow blow Dimensions L x W x H 950 x 435 x 980 mm Weight 120 kg Age approx. 10 years estimated without obligation Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG welding torch WHW 20/Z, DD 12 mtr. long 1 piece ground cable 50 sqmm, 8 mtr. long 1 piece pressure reducer 1 piece spare parts box complete E ...
Inert gas welding machine, inert gas device, welding rectifier -without wire feed -Max. welding power: 350 A -Dimensions: 700/600/H1400 mm -Weight: 62 kg
workpiece dia.: / mmmaterial: rust free/heat resistant steel: / welding process: 15-20 bolts /min at: / mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible.
number: 70 Positionenweight: 90 kgcondition: neu : 28 mmWMT Set 7: 70-piece, 28mm system, consisting of:3x Pipe clamps D28 90° – Item No. 40283973x Pipe clamps D28 180° – Item No. 40283963x Pipe clamps D28 45° – Item No. 40283983x Pipe clamps D28 300x150 – Item No. 40283993x Pipe clamps D28 300x200 – Item No. 402840015x Ball lock pins D28x50 – Item No. 402766310x Locking pins D28x80 – Item No. 40288764x Universal Stop D28 100x50x25 mm – Item No. 40284694x Universal Stop D28 150x50x25 mm – Item No. 40284704x Universal Stop D28 225x50x25 mm – Item No. 40276572x Universal Stop D28 300x50x25 mm – Item No. 40276592x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 40286572x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 40286582x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 40286492x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 40286522x Stop ...
current intensivity: 200 Acapacity at 100% load: 150 A: 230 V: kVAweight of the machine ca.: 9,0 tdimensions of the machine ca.: 0,46 x 0,15 x 0,32 mTIG welding system- New- 3m hose package- Additional 8m hose package- Ground cable- Gas connection hose- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A railing welding device (railing welding jig) Förster is available. Component weight: 300kg, turning radius: 360°, axle height: 1000mm, max. incline: 60°, railing height: 600mm-1200mm, max. profile dimensions X/Y: 80mm/40mm, max. profile diameter: 80mm, machine dimensions X/Y: 5000mm/1200mm. Documentation available. On-site inspection is possible.
A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible.
Offer 25128 Specifications: - Rated power at 50% ED 25 kVA - Max. welding power 68 kVA - Adjustable projection 280 to 450 mm - Stroke 5 to 40 mm - Welding values of sheet steel approx. 3 + 3 mm - Electrode force adjustable up to 240 daN - Required air pressure 6 bar - Cooling water volume 4 l/min - Connection 400 V - Space requirement approx. W 800 x H 1700 x D 1050 mm - Weight approx. 220 kg - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling unit
Offer 05394 Specifications: - BIA tested sweat extraction device - Joint extraction arm 3000 mm - Air volume flow approx. 1000 m³/h - max. static pressure 2700 pa - Filter area approx. m² - Filter control - light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg
Inv. Num. : 8432 Type: BRP-VP0H Producer: Boki Created: 2005 Parameters: Machine weight: 1200 kg
Inv. Num. : 8431 Type: BRP-VP-500 Producer: Boki Created: 2013 Parameters: Machine height: 2100 mm Machine length: 6500 mm Machine width: 1400 mm Machine weight: 1200 kg
Plasma cutting machine, plasma cutter for plasma cutting system-Manufacturer: Hypertherm, gas console for plasma cutting machine-Type: 073239 from plasma cutting machine HT2000LHF-Dimensions: 295/175/H370 mm-Weight: 9.9 kg
A new CNC plasma cutting machine MicroStep including air plasma power source Hypertherm, nesting program and Aigner filter system is available. 1) CNC plasma cutting machine MicroStep MasterCut Compact, year of manufacture: 2023, processing dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, control: MicroStep iMSNC, operating hours: approx. 2588h. 2) Plasma cutting and gouging unit Hypertherm Powermax 45 XP, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter system, weight: approx. 500kg. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025.
Flame cutting machine, torch, oxy-fuel cutting machine, cutting torch, welding torch, hand cutting torch, welding set-Manufacturer: Zinser: Burner set in a metal box-Burner sizes: No. 00 to No. 4 (max. 9 mm)-Cutting torch: A-Accessories: see pictures-Dimensions case: 320/200/H65 mm-Weight: 2.8 kg
Offer 24587 Specifications: - Electrostatic filter with indicator light - Extracted and purified air is returned to the working area - Wall-mounted design with two articulated extraction arm - Articulated suction arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter area 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg
table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: - mmtable load: 3000 kgswivelling range: 360 Gradvertical motion range: 1380 mmstroke speed: 1900 mm/min: 360 °total power requirement: 4 kWweight of the machine ca.: 5400 kgdimensions of the machine ca.: 3800 x 3700 x 4200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mieth Maschinenhandel
