usi clearing innocenti used for sale

Clean room pass box. 2-doors Pallet air Shower UV. Pass boxes Air Shower UV is aimed at dust removal and disinfection processes using ultraviolet light (UV) without wastes. Thanks to the fans in the unit and the induction nozzles, dust is removed and collected in the equipment’s filters.

bore capacity in steel (diameter): 25,0 / 30,0 mm throat: 150 mm bore stroke: 120 mm threading: M18 / M22 spindle taper: 3 MK table:: 300 x 270 mm turning speeds: 200 - 4.000 U/min column diameter: 100 mm total power requirement: 0,75 / 1,1 kW weight: 170 kg range L-W-H: 800 x 500 x 1400 mm from a training workshop () New price approx. 4.700 euros Furnishing: - robust bench drill with V-belt drive - Clamp / relax using a quick release lever - stepless speed adjustment - digital speed display - EMERGENCY OFF push button at the front - stable feed handle - stable quill for tool mounting - Thread cutting device - Right / left running of the work spindle - Pole changing motor - manual spindle feed - Height-adjustable work table, using a hand crank - adjustable drilling depth stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cobot collaborative robot Dobot CR10 new - with Safeskin Reach: 1300mm Payload: 10kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effectively Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent interactive panel robot hand guidance The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, gr ...

Cobot collaborative robot Dobot CR5 new - with Safeskin Reach: 900mm Payload: 5kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effectively Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent interactive panel robot hand guidance The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grind ...

: gebraucht : 2019 : 5505 : Niederlande : 2670 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm The data for this ad was c ...

cutting range: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: square: 250 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 180 mm automatic feeds: 9999,9 mm feed: minimum 2 mm cutting diameter: minimum 5 mm band speed: 15 - 100 m/min vice: 340 mm Öffnung dimensions of saw-band: 3650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1240 kg range L-W-H: 1800 x 1900 x 1750 mm Furnishing: - Fully automatic electro-hydraulic band saw - with additional semi-automatic function, for cuts from 0 ° to 60 ° left - Windows CE” based MEP 50 control and 7 ”touch screen display - Material feed with stepper motor via recirculating ball screw - 600 mm repeatable single stroke to cut any length - Feed ...

Spindle diameter: 200 mm Longitudinal X: 16000 mm Vertical Y: 1128 mm Cross Z: 4785 mm Positions ATC: 0   Table length: 4250 mm Table width: 4250 mm Number of tables: 1   CNC Brand: Heidenhain CNC Model: iTNC 530 5 Axis MACH-id  341 MAKE  Innocenti italia TYPE   CWB FAF 200 CNC YEAR  2015 Reconditioned to iTNC 530 / New electric SPECIFICATIONS  ControllHeidenhain iTNC 530 5 Axis Floor or table type borer   Floortype X - Travel 16000 mm Y - Travel 1128 ( table - column) mm Z - Travel  4785 mm W - Travel   1600 mm Spindle Diameter Ø  200 mm Spindle Taper  SA60 kW power on spindle 74 kW Spindle speeds / ranges0 - 500 Rpm Table Length x Width 4.250 x 4.250 mm Table load in kG  60000 Kg Movement V Axis   2590 mmNumber off controlled axis5 Retrofitted 1990 - 1993 & 2013 Innocenti CWM FAW 20 ...

G.Webb RP760 High Speed rotary filler designed for high speed container handling and filling particularly aimed at powder & particulate packaging industry sectors. This includes pharmaceutical, chemical, and food ingredient companies using glass or composite containers, requiring clean & compact filling. previously used for HDPE jars and has change parts for 150g powder fill 70mm x 130mm, 300g powder fill 70mm x 135mm, 500g powder fill 75mm x 180mm, previously ran on 120 jars per min.

MACHINERY CO2 1610 WiFi 160 W laser was built by the Polish company Technologie CNC in 2019. The machine is designed for engraving materials made of glass, ceramics and marble, as well as cutting such materials as acrylic and plywood. The machining process is performed on a large work table with a length of 1600 mm and a width of 1000 mm, using a powerful CO2 laser, guaranteeing high cutting speeds as well as the highest precision and quality of machining. The laser engraving machine supports the most important graphic formats such as DST, PLT, BMP, DXF, AI and the most popular graphic programmes such as CorelDraw, AutoCAD or Photoshop. The installed WiFi module allows for wireless communication with the machine. Along with the MACHINERY CO2 1610 WIFI laser engraving machine, equipment is offered consisting of an unused knife table and rotary axis, a CW 5200 liquid cooler and a dust e ...

Spindle diameter: 500 mm Longitudinal X: 8500 mm Vertical Y: 1000 mm Cross Z: 2750 mm Positions ATC: 0   Table length: 3000 mm Table width: 2100 mm Number of tables: 1   CNC Brand: NUM CNC Model: 3 Axis MACH-id   3411 MAKE   Innocenti TYPE  FAF 140 - 95 YEAR   1964 SPECIFICATIONS   Controll   Num in 3 Axis Floor or table type borer  Floortype X - Travel   8.500 mm Y - Travel  1.000 mm Z - Travel  2.750 mm Spindle Diameter Ø  500 mm Table Length x Width  3.000 x 2.100 mm Number off controlled axis  3 Innocenti FAF 140 - 95 cnc floor boring machine

Other Info: 3.900 x 1.600 x 500 MACH-id   3412 MAKE   INNOCENTI TYPE   RDG YEAR   60 er SPECIFICATIONS   Length  3900 mm Width   1600 mm Height  500 mm T -slot size   Cross T slotted Weight a plate approx.5000 Ton Number off matching pieces  15 DIMENSIONS Length   11700 mm Width   8000 mm T slotted floorplate, cast iron plates,  

General / technical data: Manufacturer: Rausch Type: RS6/1000 Year of construction: 07/2000 Machine no.: 60305 Weight: approx. 750kg Tractive force: 60kN (80kN) Clearing speed: 4m/min Return speed: 8m/min stroke: 1000mm Maximum tool length: 1200mm Maximum workpiece diameter: Ø approx. 900mm Table opening: Ø 90mm for standard clearing mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to the floor without superstructures) Current type: 400 Volt / 50Hz – 6 / 7,5kW Accessories/ Special equipment: – electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) – integrated coolant system with check valve and drain valve – patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is energized in our wareho ...

Plate length: 2000 mm Plate width: 800 mm Plate thickness: 100 mm Number of T-slots: 0   Size T-slots: 28 mm Type of material: Cast Iron   Make 2000 x 800 (60x) Type INNOCENTI Year 60 pieces in stock L = 2.000 W = 800 T = 100 4 x T 28 in length ways 2 x T 28 in width ways Weight = 500 Kg Loading = 15 Ton / M2  

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...

RUIAN KODA MACHINERY ENG-500 foil gloves making machine, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production line ensures high operating stability, even at maximum production speed. The copper dies included with the machine allow for the production of high-quality disposable gloves with a maximum length of 400 mm and a width of 300 mm. The ENG-500 automatic film glove production line produces up to 500 pieces of this type of item in one minute. The produced gloves are characterised by two thick layers, effectively protecting the hands from viruses and bacteria. The automatic film glove production line is equipped with, among others, an AISET temperature controller, a PLC controller and a 2.2 kW YASKAWA servo drive, which ensure ...

Specifications 1.3.1 Dimensions, space requirements, weight, energy requirements Dimensions, weight Machine incl. control cabinet Length x Width (depth) x Height (incl. Levelling elements): approx. 3,600 mm x approx. 2,400 mm x approx. 2,500 mm Minimum height requirement: 3,500 mm Net weight: approx. 8,500 kg Pay attention to the set-up plan! It contains all connection data, space conditions, etc. necessary for energy supply and installation. 1.3.2 Spray-suppression cabin, full-space cover of the machine View into the machine interior: safety window (window composite) Design: polycarbonate lens protected on both sides Cover of mounting or maintenance openings: Sliding door(s) hinged and/or removable body parts Cover of the operators side, loading and unloading opening: sliding door, loading hatch Activity: - Foldable body parts,sliding doors of assembly and maintenance openings: manual - ...

ECKERT DIAMENT FIBER laser was built in 2011. High-performance laser FIBER with power of 2 kW allows cutting sheets of black steel with thickness of 12 mm, stainless steel with thickness of 8 mm and aluminum with thickness of 8 mm. The cutting process takes place on a pendulum exchange table with dimensions (length x width) 3000 x 1500 mm. The machine is equipped with a Precitec HP 1.5 YAG SSL+EG8010 cutting head and a YLR-2000 Compact IPG 2 kW laser resonator. The entire system is operated using a CNC controller EckLaser 2872. The laser cutting machine has worked a total of 22503 hours. Technical data of laser cutting machine ECKERT DIAMENT FIBER - laser power: 2 kW - thickness of cutting black steel sheet: 12 mm - thickness of cutting stainless steel sheet: 8 mm - thickness of cutting aluminum sheet: 8 mm - table dimensions (L x W): 3000 x 1500 mm - type of table: pendulum  ...

bore capacity in steel (diameter): 50,0 mm arm length: 350 - 1.590 mm workpiece height max.: 645 - 1.240 mm turning speeds: 25 - 2000 U/min spindle taper MT: 5 MK base plate: 980 x 1.600 mm threading: 42 M quill stroke: 320 mm total power requirement: 4,0 kW weight of the machine ca.: 3.500 kg. range L-W-H: 2450 x 980 x 2840 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED mach ...

TECHNICAL DATA SHEET CNC – Travelling column milling machine Make PARPAS Type SHARK One Control HEIDENHAIN iTNC 530 HSCI Year of construction 2016 Travel Longitudinal movement (X-axis) 3,500 mm Transverse movement (Y-axis) 1,083 mm Vertical movement (Z-axis) 1,074 mm Clamping table Clamping surface 4,000 x 1,000 mm Threaded holes with fitting seat Feeds X-, Y- and Z-axis, infinitely variable 2 - 30,000 mm/min. Rapid traverses in X / Y / Z 30 m/min feed force of the axes 10,000 N 2-axis milling head 2-axis milling head TUB-E92 with drive viaTorque motors for 5-axis simultaneous machining Power at 100 % ED 29 kW Speed range, infinitely variable 0-18,000 min-1 torque 92 Nm Rotational speed axis A/C 60 min-1 Tool holder HSK 63A – DIN 69893 Clamping force A-, C-axis 2,300/4,000 Nm Automatic tool changer ATC Tool stations 30 places  ...

Our company currently offers the R-1000 stationary concrete block machine. The SUMAB R-1000 is one of the most technologically advanced machines on the market! A giant among all block machines! Real money maker! Using a SUMAB R-1000, you can produce the following products: • Empty blocks • Curb stones • Paving stone • Tiled stone Technical details: • CAPACITY - 1000 m2 pavers per shift. • BLOCKS 20X20X40 18000 pieces/8 h Scandinavian quality and good prices! Contact us for pricing and technical specs! We will provide you with the best solution for your business projects!

Kramatorsk Model KJ1910 serial number 1913 Swing Over Bed: 1600mm Maximum Workpiece Length: 6300mm Maximum Drilling Diameter: 991mm Spindle power: 125.00kW Spindle Speed: 1 - 320 RPM Infinitely Variable power Existing Additional Chuck workholding range: 200 - 1250mm diameter, workpiece weight capacity using two open roll supports: 60,000kg, size range in closed backrest: 200 - 800mm, size range in open backrest: 630 - 1380mm, pressure head speed range: .125 - 500 infinitely variable, pressure head spindle bore diameter: 182 mm, pressure head motor power: 75kW DC, headstock speed ranges: 3, pressure head speed ranges: 2 Machine Length: 22950mm Machine Width: 4375mm Machine height: 2670mm Weight: 101091kg Condition Good

IRAC SR MINI EVOLUTION printing screen washing machine was built in Italy in 2017. The machine is used in the process of semi-automatic cleaning of printing screens using room temperature solvents. The offer includes: – printing screen washing machine: IRAC SR MINI EVOLUTION 1000X1000 LST (2017). – solvent distiller with air tank: IRAC ALPHA 50/R (2017) The SR MINI EVOLUTION screen washing machine is equipped with a fully programmable pneumatic control system, allowing easy management and optimisation of the machine’s working phases. Directly directed nozzles deeply clean the entire surface of the printing screen, which is then rinsed and blown off. A high level of safety in the use of the printing screen washing machine is ensured by the fully hermetic design, guaranteeing no emission of harmful fumes. The ALPHA 50/R solvent distiller is an economical and environmentall ...

Standing seam metal roof machine F3 Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing s ...

Inject Star ES-1100 Vacuum Tumbler-Ref.8491D Brand: Inject Star Model: ES1100 Manufacture year: 2005 Volts (v): 3 220 / 380 V / 50 Hz Power : 2,2 kW Width: 1540 mm Height: 1800 mm Length: 2150 mm Weight: 750 Kg This machine is designed for massaging meat with and without bones, using a special baffle. The product is moved across the special baffle to provide efficient protein activation, and massaging in a rotating, sliding, and slipping movement. Drum volume: 1100 l Optimal loading: 500-700 kg Drum rotating speed: 1-11 turnovers per minute The system is driven by a frequency controlled motor via friction rollers. The container is emptied by rotating it to the left. Equipped with computer. Up to 99 production programs can be created and stored. The programmable parameters are: massaging speed, massaging duration, direction of rotation, processing time,  ...

A glass bottle fruit juice hot filling line with bottles cooling tunnel Capacity: 5,000 units (1.0 and 0.75l), built between 1994 and 2014 Box line, equipped with K 1; Dirt box task on transport system, done manually K2; Bottles lid screwdriving system from Fa. Elektro Maschinenbau Rink GmbH, Type: KM 740/7K , Fabr. No 07/1813/93 Year of construction 1993 4 boxes of 6 bottles each are made at the same time the lids autom. unscrewed and put into a Containers disposed of. K3; Kettner bottle unpacking line Comm. No. 93/0604/083, Type: R09 JUN 9, Year of construction 1993 12 tulips per row x 3 are simultaneously lifted out of the box and onto a bottle tasktable with 15 V2A chain belts. K4; Box washing and turning system Enema at the bottom, outlet of the box at the top Manufacturer Fa.. Klotzki Maschinenbau, Type: Reversible wheel washer, year ...

Hor. Grooving machine make RUWO HAHNDORF type REWK 52/10Machine -No: 81620 Year 1981Butt length: 300 mmGroove width when pushing: 32 mmGroove width when clearing: 10 mmkl. Bore diameter when pushing: 40/17 mmkl. Bore diameter with spec. Grooving knives: 6.0 mmkl. Bore diameter when broaching: 6.0 mmCutting speed: 3.0 m / min.Traction: 2.0 tDrawing length in 2 moves: 500 mmRäädadellänge max.: 640 mmFaceplate diameter: 360 mmDrive power: 1.5 hpWeight approx: 230 kgLength of the machine: 780 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal grooving and broaching machine manufactured by HENNING type KM 350Masch. -No: 19001 Year of construction 1976Technical specifications:Clearance length: 350 mmDimensions approx .: 2100 x 1000 x 1300 mm weight approx .: 1200 kgWith- Accessories on guide sleeves, broaches- Operation switch pushing / clearing- Reverse and set-up operation- Reversal soft - hard- coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Dimensions (L,W): 1400 x 1750 mm Weight: , kg tiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4 --------------------------------------- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment demonstration machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable f ...

PRIMA POWER PLATINO 1530 laser was manufactured in 2001 in Italy. The machine is designed for cutting metal sheets made of structural steel, stainless steel and aluminium. The processed sheet may be up to 15 mm thick (structural steel), 8 mm thick (stainless steel) or 5 mm thick (aluminium). The feed rates in the X/Y/Z axes are 3000 mm (X axis), 1500 mm (Y axis) and 140 mm (Z axis) respectively. The laser cutting machine is equipped with a high performance ROFIN SINAR SLAB DC025 resonator with a power of 2500W, created for fast and precise cutting in metal sheets and guaranteeing the highest quality of cut elements. The installed PRIMACH 20L CNC control allows memorising many different work programmes and controlling every aspect of machining. The machine is offered with a wide range of equipment, including: CAD/CAM software SiCam v14 (license for one workstation) and post-processo ...

Width: 1900 mm Height: 1350 mm Length: 1300 mm Weight: 349 Kg The Urschel GA dicer accepts a maximum infeed product of up to 5.5" (140 mm) in any dimension. The Model G-A Dicer produces flat dices or flat strip cuts. This dicer is equipped with stainless steel product contact parts. It also features continuous operation for uninterrupted production. The Model G-A dicer produces uniform dices, straight french fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables. Types of Cuts Slices: 1/16 – 3/4" (1.6 – 19.1 mm) You say: A slicing knife, crosscut knife spindle and circular knife spindle are used for dicing. Changing the size of the cubes is done by using the required cutting spindles and adjusting the slice thickness. Slice thickness: 1/8 – 3/4" (3.2 – 19.1 mm) Crosscut knives: 9/32 – 7/8" (7.1 – 22.2 mm) Circula ...

Supports NOE 20-300 / NOE 20-350 , used Work economically, quickly and safely with robust Euro construction supports according to EN 1065 High load-bearing capacity Permissible column loads according to EN 1065 Long service life due to -Hot-dip / piece galvanizing -strong head and foot plate Low weight Wide adjustment range Protection against injuries caused by crushing protection 247 x Supports NOE 20-300, used, EUR 21,60 per piece 6 x stacking rack, galvanized, used, EUR 135,00 per piece 265 x Supports NOE 20-350, used, EUR 27,50 per piece 7 x stacking rack, galvanized, used, EUR 135,00 per piece Props NOE 20-300 / NOE 20-350 , used Work efficiently, safely and quickly using robust Europrops in accordance with EN 1065 High load capacity Allowable prop loads in accordance with EN 1065 Long service life through -Hot dip / discontinuous galvanising -Str ...

bore capacity in steel (diameter): 28,0 mm threading: 12 M bore stroke: 130 mm throat: 250 mm table:: 375 x 375 mm morse taper: 3 MK turning speeds: 75 - 3.200 U/min total power requirement: 1,1 / 1,5 kW weight of the machine ca.: 215 kg. range L-W-H: 450 x 600 x 2.020 mm Description : - 12 switchable speeds thanks to the powerful 2-stage motor - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Solid work table (rotatable 360 °), swiveling from -45 ° to + 45 ° - Machined machine base for clamping particularly high workpieces - Quality ball bearings ensure high concentricity - Easy tool change thanks to the automatic tool ejector - Adjustable drilling depth stop, drilling depth can be read off using a scale - Stable and polished steel column, designed for heavy use - Very smooth running thanks to ground gears in the gearbox - High level of  ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: semi-automatic semi-automatic dynamic manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw ...

Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...

Qty. 1 Second-hand laser tube wall thickness measurement unit Mfc.: MSG Maschinenbau GmbH Built: 2009 Determination of wall thickness using laser technology. Max. loupe dia.: 85 mm (can be modified) Wall thickness: 11 – 14 mm Loupe length: 250 – 600 mm Operation speed: 1.3 m/sec. Power: 6.5 kW, 400 V, 21 Amps., 50 Hz Air pressure: 6.0 bar Scope of supply: Removal device Feeder Saw inlet channel Vertical drivers Vertical & horizontal straightener Heavy-duty metal circular saw Blow-out and suction device Weighing device (calculation) Catchments Loupe crane Suction unit Hydraulic aggregat Collection stand

Used labeling machine P.E. LABELLERS model Universal M / S 6T / 540 / 2S-2E Power required: 3kW Required pressure (demand): 5 bar (15 l / min) Capacity: 80 pcs / min (jars - 1 format) The device allows labels to be applied to the front and back of the package. The device is equipped with one type of format. When using other formats, it is possible to cover jars of 0.3-0.9 liters. The device has a buffer sensor for jars that are fed into the labeller. A cold label gluing system is used.

VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...

SERON 1315 EXPERT CNC milling machine built in Poland in 2017 is new and has never been used. The machine designed and manufactured with attention to the smallest details, is used for precision machining of a wide range of materials such as mild metals, plastics, carbon, wood, wood-like panels and glass. All vibrations and deformations during the milling process are eliminated by the high-quality ribbed steel construction with a T-slot table made of aluminium profiles, with a length of 1500 mm and a width of 1300 mm. The workspace is additionally equipped with a special PVC overlay to protect the table cover while cutting the workpieces through. At the end of the table there is a six-position linear magazine with an automatic tool correction sensor. The 1315 EXPERT machine axes are driven by highly dynamic and precise brushless AC servo drives with back pressure, equipped with serv ...

ReiCat 600 Catalyzer suitable for roasters from 30 kg up to 60 kg per batch. Environment friendly and cost-efficient technology that neutralises smokes and odour plumes. With the ReiCat Catalyst the micro particles, odours, smoke, plumes and hydrocarbons are converted into harmless substances such as water vapour (H2O) and carbon dioxide (CO2) by using a combination of techniques. This one was manufactured in 2019 and used less than one year in 2020. The price includes shipping to Europe and a 6 month warranty. Don't hesitate to check the seller profile to see other roasting equipment offers

Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...

WIWOX MC 110 II ultrasonic cleaning machine, built in Germany in 2004, cleans metal parts from unwanted deposits using ultrasonic waves. The use of such technology allows for fully professional cleaning of workpieces, as well as preventing surface damage and saving time and costs. The ultrasonic cleaning machine allows for cleaning workpieces weighing up to 110 kg, even in the most inaccessible places. The cleaning process takes place in a working chamber with dimensions (L x W x H) of 516 x 360 x 435 mm, where the placed workpiece is cleaned by ultrasonic waves at a temperature of 80°C for approximately 5-15 minutes. The total weight of the device is 280 kg. Specification of WIWOX MC 110 II ultrasonic cleaning machine - dimensions of the working chamber (L x W x H): 516 x 360 x 435 mm - maximum weight of workpiece: 110 kg - ultrasonic power: 1.2 kW - connection power: 6.2 kW  ...

PONAR ŻYWIEC UT 090 H injection moulding machine was built in Poland in 2007. The machine is used in processing thermoplastics using the injection moulding method. The hydraulic mould closing unit, operating with a closing force of 90 tons, is protected with significantly offset fixed and movable covers facilitating the installation of complex moulds with their accessories. The mounted moulds can be a minimum of 225 mm high, while the mould clamping plates have dimensions (L x W) of 615 x 615 mm. A MOOG-BUHL CNC control unit enables the machine to operate in any desired manual or automatic mode, as well as setting and monitoring the injection process parameters. The screw of the machine with a diameter of 30 mm rotates at a speed in the range of 10 to 380 rpm. The equipment of the machine for plastic injection moulding includes, among others, a plastic feeder and a crane with a multi ...

Equipment: - Machine stand throughout - Fixed stop side right - Paint finish Grey RDS 240 80 05 - Inlet ruler motorically adjustable, extended by 300 mm - Inlet lock pneumatically controlled - automatic edge feeder - Upper pressure: belt upper pressure - Height adjustment motorized - Position display and input centrally via the controller - Transport chain with rubber support, 80 mm wide - automatic central lubrication for the transport chain - Workpiece support in scissor design, approx. 1000 mm extendable - Noise protection equipment - Hood interior lighting 3 lamps - Control Power Control PC20+ Aggregate technology: - Joining milling unit 2 x 2.2 kW 200 Hz (60 mm joining milling cutter set) - Gluing unit A15 (workpiece preheating, QA34 application unit, infrared adhesive activation, magazine for rolls and fixed lengths, pressure zone with motorized adjustment, driv ...

Still EXD SF 20 Pallet Stacker E-Ant + Charger + Driver's platform lateral support Fork length 120 cm YOC 2011 From the manufacturer the following information: The EXD-S is a heavy-duty double-deck stacker that can lift a maximum of 2,000 kilograms when using the initial lift or twice 1,000 kilograms when using double-deck loading and unloading. With the EXD-S, two pallets can be transported at the same time - This allows trucks to be loaded and unloaded in a time-saving and effective manner. Frame. - The shape of the frame has been specially developed for use in trucks and in confined spaces. In particular, the edge shapes support driving over ramps and entering trucks. - The tips and undersides are designed as sliding runners and prevent them from getting caught at transitions. The angled corners of the platform make it possible to drive backwards out of the truc ...

BOVONE BISELLATRICE 471 glass beveling machine was manufactured in Italy in 2012. The machine designed to meet even the most diverse customer requirements, proves ideal for the precise machining of even the smallest glass sheets with a thickness of up to 25 mm. Made from the highest quality cast iron, the body of the glass bevelling machine guarantees high reliability, efficiency and stability during the working process. Flat and oblique glass edges are ground using 12 grinding wheels (including felt, diamond and peripheral grinding wheels), the configuration of which enables operation at very high working speeds. The total weight of the machine is 4400 kg. Technical specifications of the BOVONE BISELLATRICE 471 glass bevelling machine - maximum glass thickness: 25 mm - minimum glass thickness: 3 mm - minimum glass dimensions: 35×35 mm, 25×500 mm - number of spindles: 12 - work ...

REF-407 VVA-300 AUTOMATIC VACUUM JAR SEALING MACHINE This machine with steam injection vacuum-seals round, square or irregular jars (provided that they have two parallel or symmetric sides) by means of a twist-off capping system using VAC-VEM type lids. For different jar types made of glass, PET, etc. The machine is equipped with an automatic lid feeder. The steam system allows its effective injection in order to reach a high vacuum level. The easily adjustable mechanism and the possibility of using the machine at low-speed operation make it possible for the operator to change the jar format and adjust the machine in very little time. This machine is completely made of stainless steel and other materials resistant to the corrosion caused by products used in the canning industry. Technical details: Manufacturer: VV INTERNACIONAL Model: VVA-300 Max. output: 300 jars/m ...

MACRI ITALIA PROVAR 6-45 U-D bending machine was manufactured in 2019 in Italy. The fully automatic mandrel bending machine is used in the process of machining tubes and profiles with a maximum diameter of 45 mm in 6 numerically controlled axes (X, Y, Z, B1, B2, A). Excellent process stability and workpiece quality, with the possibility of bending standard and variable (free) radiuses, are guaranteed thanks to the robust steel construction, the moving head with high-strength gears and the equipping of all machine axes with brushless servomotors. The MACRI PROVAR 6-45 U-D CNC tube bending machine is controlled using state-of-the-art MACRI software with the ability of importing files from 3D programmes and performing an anti-collision test with 3D simulation, programming of positioner force and automatic mandrel lubrication and many other useful functions. The total weight of the machi ...

cutting diameter: 280 mm capacity 90 degrees: flat: 280 x 280 mm dimensions of saw-band: 4930 mm cutting speed: 19 - 90 m/min clamping range: 295 mm diameter: kleinste 16,0 mm feed range: 6 - 600 mm/min voltage: 400 V total power requirement: 5,5 kW weight of the machine ca.: 1750 kg dimensions of the machine ca.: 2100 x 2333 x 2065 mm Furnishing: - fully automatic metal band saw - hydraulic material clamping - Single stroke 6 - 600 mm / multiple stroke max. 9,999 mm Manual setting of the section length using the handwheel with quantity specification - smallest saw diameter 16.0 mm - minimum section length 6.0 mm - Automatic mode / single cut selectable - Infinitely variable belt speed adjustment - Stepless adjustment of the feed speed - User manuel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wölco Lupo VPAB-53 labelling system Fully automatic labeling machine for professional labeling Broadband Multi-Labeler Manufacturer: Wölco Masch. Type: Lupo VPAB-53 YOC 2011 Connection: 400V Current 3 x 16 A Power: 2.5 kW Air: 6 bar Broadband Multi-Labeler Wölco Lupo VPAB-36 Manufacturer: Wölco Masch. Type: Lupo VPAB-36 YOC 2011 Connection: 400V The Lupo VPAB-36 is the ideal device for permanent industrial operation when precise and variable label printing with position-accurate application is required. Sato Printer S84 ex Label Printing System The SATO S84-ex/S86-ex printer is a very powerful, automated label printing system with a user-friendly design and a wide range of functions. This printer with its solid Design is designed for continuous operation. The main features of the printer are: • Two-color LCD backlight and two-color status LED ...

Used Metalbud Nowicki MH140 injector is a high-performance device. It is equipped single head, easy and clear control using inituitive panel and efficient rotary drum filter for brine filtration. Using different parameters it is possible to adjust the belt speed and injecting pressure. Whole construction is made of acid resistant stainless steel which guarantees the ease of maintenance and maximum hygiene. Number of needles: 140 Max product height: 200mm Installed power: 11.7kw Belt width: 400mm Dimensions: L 1800 x W 1010mm x H 2015mm Weight: approx 550kg