usi clearing innocenti used for sale

x-travel: 1000 mm y-travel: 800 mm z-travel: 900 mm control: HEIDENHAIN type: TNC 530 itnc mm rotary table dia.: 600 mm spindle taper: HSK 63 turning speeds: 18000 U/min workpiece weight: 3000 kg Tool changer: 30 Pos. : table - swivable: Grad total power requirement: . kW weight of the machine ca.: 12 t dimensions of the machine ca.: . m DEPO DYNAMIC 1009 • X axis (milling unit/cross slide move across): 1,000 mm • Y-axis (crossbar moves lengthways): 900 (+170) mm • Z-axis (milling unit moves vertically): 600 mm • Feed / rapid traverse X, Y and Z axis: 40,000 mm/min • Acceleration X, Y and Z axis: 5 m/s2 • Workpiece carrier – clamping surface (X/Y): 1,200 x 1,000 mm • Distance spindle nose / clamping surface: max. 750 mm • Main spindle 80 Nm, 30 KW (S1 / 100% duty cycle) - Electronic hand wheel • Chip disposal • Air supply through the inner spindle (ILZ) • Workroo ...

Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Waldner Dosomat 12.6 filler and sealer for foil trays. Currently set up for using 82mm diameter foils for meat paste like pate or pet foods. Machine is in lovely condition and available for inspection.

Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Strap cutting machine was built in 2019. The purpose of the machine is to cut seat belts and other materials such as PVC tape, nylon and velcro to a specific length. The raw material is taken from a roll and then precisely measured and cut using a cutting knife. The machine was built with the highest quality components from reputable brands. An installed controller allows you to set the correct temperature of the cutting knife, which by melting the edges of the cut material prevents it from delaminating and fraying during cutting. The tape cutting machine has never been used and is brand new. Technical specifications of the strap cutting machine - PC software: KEYENCE - temperature controller: OMRON - servomotors: MITSUBISHI ELECTRIC (3 pcs.) - rotary table: SMC INDUSTRIAL AUTOMATION (3 pcs.) - table rotation angle: 190° - electric heater: LIMATHERM SENSOR - inductive pr ...

Thermographic machine Make Sunraise Model SE-15 Year 2008 Working width 381 x endless (15") Speed up to 10.000 sheets per hour depending on sheet size Watt 7.500 watts using 1 zone or 12.000 watts using 2 zones Details can be used for all sorts of printed sheets, the thermograpic sheets are thereafter to be used also in laser printers Foot print 518 x 96 cm (560 kg) Condition as new Available direct

Curing injector Fomaco FGM 48F SC BLP M3 Injector Tenderizer FGM48FSCBLPM3 + belt filter CBF 500, used Type: FGM 48F SC BLP M3 manufacturer: Fomaco A/S, Denmark (fomaco.com) Year of construction: 2015 Flexible injector tenderizer for meat, poultry or fish industry. Good condition, previous use in the field of fish. The M3 is a series of thoroughly tested, high-quality production machines designed for use in demanding and aggressive production environments. The "box-in-box" construction seals and protects critical electrical components and controls from the ingress of water, moisture and weathering. By using state-of-the-art pumping systems, dead zones and low-flow areas are eliminated, resulting in a constant pressure and precise flow rate. The result is an even distribution of brine - regardless of product, type, size and number of needles. With the BLP quick release system,  ...

Dobot collaborative robot Cobot CR 3 - new Range: 620mm Payload: 3kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing M ...

Dobot collaborative robot Cobot CR 16 - new Range: 1000mm Payload: 16kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing ...

x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...

sheet width: 2000 mm plate thickness: 8,0 mm max. plate thickness: 8,0 mm anbiegen roll diam. toproll: 240 mm roll diam. bottom roll: 240 mm side roll diameter: 240 mm work height max.: ca. 1100 mm work speed: 6,5 m/min voltage: 400 V total power requirement: 11,0 kW weight: 4910 kg range L-W-H: 4000 x 1300 x 1600 mm Furnishing: - robust 3-roller bending machine with asymmetrical roller arrangement - free-moving operation - analogue position display for rollers (scale) - Fixed top roller - manual infeed of the bottom roller, using handwheels with scales - electrically adjustable side roller An inclined position is possible by pushing out a coupling Inclination for bending tapered tubes Adjustment takes place via a geared motor - driven upper and lower roller Side roller runs as a drag roller - original instruction manual + machine card The data for this ad was created with ModulMW ...

Dobot collaborative robot Cobot CR 16 with SafeSkin- new Range: 1000mm Payload: 16kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grindi ...

Baader 166 Fish Gutting machine Small whitefish heading and gutting machine Condition: perfect This machine operates according to the same procedure as the Baader 162, however, within the range of smaller whitefish from 35 to 70 cm in total length (0,5 to 2 kg). When using both machines at the same time, total catches can be processed after rough grading since the working ranges of both machines overlap generously. Capacity: 25, 35 or 40 fish/min Power consumption: 2 kW Water consumption: 25 L/min Dimensions: 1,40 x 1,20 x 1,80 m Weight (net/gross): 650/920 kg The Baader 166 can be combined with the Baader 184

sheet width: 2000 mm plate thickness: 8,00 mm max. plate thickness: 8,00 mm anbiegen roll diam. toproll: 240 mm roll diam. bottom roll: 240 mm side roll diameter: 240 mm work height max.: ca. 1100 mm work speed: 6,5 m/min voltage: 400 V total power requirement: 11,0 kW weight: 4910 kg range L-W-H: 4000 x 1300 x 1600 mm Furnishing: - robust 3-roller bending machine with asymmetrical roller arrangement - free-moving operation - analogue position display for rollers (scale) - Fixed top roller - manual infeed of the bottom roller, using handwheels with scales - electrically adjustable side roller An inclined position is possible by pushing out a coupling Inclination for bending tapered tubes Adjustment takes place via a geared motor - driven upper and lower roller Side roller runs as a drag roller - original instruction manual + machine card The data for this ad was created with Modul ...

Frömag electromechanical lifting table broaching machine Type FTR9-0-1000-PPC Year of construction 2015 IBN 01/2016 Stroke length 1000mm Drive power 30kW Tractive force 90kN Clearing speed 0 – 10 m/min Return speed 0 – 20m/min Chip conveyor with magnetic tape Machine is in a used very good condition

Dobot collaborative robot Cobot CR5 - new Reach: 900mm Payload: 5kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing Mu ...

Dobot collaborative robot Cobot CR10 - new Range: 1300mm Payload: 10kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing  ...

Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...

DH Robotics PGC-300 Gripper Weight: 1500 g Payload: 6000 g With a stroke of 75 mm and a payload of 6 kg, the DH Robotics PGC-300 is designed to combine intuitive design with practicality. With its impressive accuracy, self-locking and a host of other features, the PGC-300 is the perfect gripper for lightweight collaborative applications. The PGC-300 is easy to set up and comes with plug-ins for most major robot brands such as Universal Robots, OMRON, etc. Properties The DH Robotics PGC-300 is an electric two-finger gripper designed for both industrial and collaborative applications. The award-winning PGC-300 (Red Dot Award, IF Award) gripper combines advanced design with proven reliability. The PGC-300 offers a stroke of 75 mm and a recommended payload of 6 kg. With its self-locking functionality, maximum force limits and other collaboration-oriented features, the DH Robo ...

DH Robotics PGC-140 Gripper Weight: 1000 g Payload: 3000 g With a stroke of 50 mm and a payload of 3 kg, the DH Robotics PGC-140 is designed to combine intuitive design with practicality. With its impressive accuracy, self-locking, and a host of other features, the PGC-140 is the perfect gripper for lightweight collaborative applications. The PGC-140 is easy to set up and comes with plug-ins for most major robot brands such as Universal Robots, OMRON, etc. Properties The DH Robotics PGC-140 is an electric two-finger gripper designed for both industrial and collaborative applications. The award-winning PGC-140 gripper (Red Dot Award, IF Award) combines progressive design with proven reliability. The PGC-50 offers a stroke of 50 mm and a recommended payload of 3 kg. The DH Robotics PGC-140 is an ideal companion for your cobot with its self-locking function, maximum force li ...

: 34 mm : 40 mm : 40 mm threading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U total power requirement: 1,4/2,2 kW Machine height: 1865 mm weight: 605 kg Standard equipment: 7 TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely v ...

Part No.: 950 024 014-02 Ser. No.: 706DGY00306 Counter: 220,000 sheets Sheet length up to 72 cm Whether brochures in A4 landscape format, posters, banners or six-page folded leaflets in A4 format, the BDT VX370 feeder ensures the efficient production of numerous printed products. In addition, the feeder can handle a very wide range of media types (60 to 400g/m²) by using the patented, vacuum-free Tornado media handling technology. This unique lifting and transport mechanism ensures reliable handling of paper, cardboard, plastic, foil and other substrates. The storage of repeat jobs is also possible with the BDT VX370 and thus supports productivity and reduces set-up times. The VX370 feeder supports print service providers who need a high-volume feeding solution to handle a wide range of different sheet sizes and banner media with excellent application flexibility.

Stock No.: 503007 Manufacturer: BATTENFELD Type: HM 10000-9200 Control: UNILOG B4 Year of construction: 2003 Operating hours: 67092 h Technical data closing page Clamping force: 10000 kN Holmass v: 1120 mm Holmass h: 1400 mm Panel size h: 1960 mm Panel size v: 1690 mm Installation height min.: 550 mm Installation height max.: 1020 mm plate pitch: 2120 mm Opening distance: 1100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering movable plate D: 250 mm Centering fixed plate D: 315 mm Technical data spray side Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min Screw torque: 11370 N Plasticizing current: 144 g/s PS Injection flow to the outside: 1144 g/s hp Number of heating zones: 8 Nozzle travel: 700 mm Dimensions & Weight Machine dimensions LxWxH: 11.6m x 2.9m x ...

– after technical inspection – good condition – Italian production TECHNICAL PARAMETERS: wheel diameter 800 mm cutting height 420 mm .max. width of cut material 780 mm cutting width at a ruler of 575 mm cutting width using rollers 195 mm .max. width of material cut with a feed of 355 mm .max. cutting belt width 40 mm top and bottom belt guidance feed speed range 0-12.5 m/min feed speed adjustable on the inverter feed roller height 140 mm pneumatic feed pressure main engine 4 kW feed motor 0.75 kW connection diameter 100 mm dimensions (L/W/H) 260 / 165 / 115 cm weight 700 kg

PLASMA PLOTTER MODEL MTX 2000/6000 Construction: steel+aluminium Working field: 6200/2200/1400 XY axis drive double-sided gate drive: 4Nm stepper motors with ratios, gear strips accuracy class 8 Z-axis drive: ball screw stepper motor double aluminum beam with a special cross-section ensures rigidity, service life Travel speed: up to 25m/min Z-axis control system: THC My plasm system Linear guides: TBI, Automatic material detection system Power supply: 240V Permissible load: 3000kg Total weight: 2500kg USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC Cutting Height Control System Rope guides TBI Double-sided gate drive: X-axis stepper motor and gear strips accuracy class 8 Y-axis stepper motor and gear strips accuracy class 8 Z-axis stepper motor and ball screw Drives implemented with TBI 20 ra ...

CANON OCÉ ARIZONA 460XT large format printer built in Canada in 2013, is designed to provide the user with near photographic quality of prints with excellent text clarity. To make this possible, the CANON inkjet printer uses a piezoelectric method, during which special crystals change their shape and volume under tension and pressure on a membrane, and then splash under high pressure onto the printed surface. The use of this technology results in excellent image sharpness, density and uniformity, both while printing on a roll media and on a flat substrate. The OCÉ ARIZONA 460XT UV flatbed printer has an extra large work table with a vacuum system, with which oversized media with a maximum size (L x W) of 3060 x 2510 mm are held stationary to ensure accurate registration of multiple prints. Printing of large-format media uses a piezo head configured for CMYK + WHITE colour support, w ...

Digital Printing Machine Ryobi Presstek 52DI Year of construction: 2007 The Presstek DI press integrates seamlessly with Macintosh and Windows workflows. The files are sent directly to the printing press via RIP. Text, images, and imposition can be reviewed on the DI's monitor on the press or using a hardcopy proofing solution. Function Presstek 52DI Maximum print speed 10,000 sheets per hour Sheet orientation in landscape mode Sheet thickness: 0.0024 inches – 0.02 inches (0.06 – 0.5 mm) Maximum sheet size: 20.47 x 14.76 inches (520 x 375 mm) Image resolution/frame time 2540 dots/inch (100 dots/mm) / 4.5 minutes Automatic change over 10 minutes Color zones, rollers / forming rollers 16 color zones / 15 color rollers per unit / 4 forming rollers Feeder Rotary Stream Feed with Suction Feeder Board Feed stacking capacity: 19.69 inches (500 mm) / delivery 15.75 (400 mm) ...

FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine was built in Germany in 2000. The machine produces high-quality plastic products using the injection moulding method. The plastic is fed into plate-mounted injection moulds with a height of 200 to 670 mm, and then welded with a force of 300 tonnes to produce items with the right shape and properties. The FERROMATIK MILACRON E300-S injection moulding machine is equipped with, among others, a large screw with a diameter of 60 mm and an operator panel located on the body of the machine with a FERROMATIK MILACRON IQT 33 CNC controller installed, allowing full control of all process parameters and programming of operating modes. The total weight of the FERROMATIK MILACRON ELEKTRA 300 S injection moulding machine is 17460 kg. Technical parameters of the FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine - c ...

BYSTRONIC BYSTAR 3015 4.4 kW laser, manufactured in Switzerland in 2012 is designed for cutting metal sheets made of black steel, stainless steel and aluminium. Workpieces with a maximum thickness of 25 mm (black steel), 20 mm (stainless steel) or 12 mm (aluminium) are machined with the highest precision and quality, using a 4.4 kW laser beam emitted by a reliable BYSTRONIC ByLaser 4400 laser source. The laser cutting machine is characterised by a large working area made of high-quality steel, with a length of 3000 mm and a width of 1500 mm, allowing for easy loading of workpieces with a maximum weight of 890 kg and ensuring high stability during the cutting process. The machine is controlled via an arm-mounted control panel with installed BYSTRONIC ByVision numerical control. The laser has been continuously repaired – the following components have been replaced during the use of ...

CNC circular saw KASTO variospeed SC 14 – used - : Price from location: 159.500.-€ (net), plus dismantling etc.! Manufacturer: KASTO Maschinenbau GmbH & Co.KG, 77855 Achern/Germany Year of construction: 2006 Technical data of the system: Dimensions of sawing material max. Ø tubes 150mm max. Ø piston rods 110mm Extraction device from Ringler: Power: 4.0 kW Voltage / Frequency 400V / 50Hz max. negative pressure 32 kPa max. air flow rate 520m³/h Sound level 62 dB(A) Protection class IP 54 System dimensions saw: Height approx. 2,200 mm Length approx. 3,900 mm Width (without chip conveyor) approx. 2,000 mm Weight approx. 4000 kg Connection. / Pre-safe. 36 KW / 100 A Former original price: 300.000,- EUR Available: now Condition: good - very good Location: Hamburg area Description of the plant: Machine body in welded construction. The machine stand, ca ...

Material width max. 820 mm PET 12 to 20my OPP 15 to 75 my BOPP 12 to 75 my OPA 30 to 50 my Paper 45 to 110 g/m2 Composite foils with aluminium 40 to 250 my Composite foils without aluminium 40 to 250 my Main functions of the machine Previously used for priming and varnishing various plastic films and composites, also used after digital printing. Technical specification Unwinding Roll diameter Up to 1 000 mm Core diameter 76 and 152 mm Roll weight Up to 1 000 kg Side edge control FIFE DP-30 Web Guide Controller. Pre-treatment station Corona AHLBRANDT TG 3104-TP Gravure coating unit 2 coating carriages 1 for primer and 1 for varnish. For coating cylinders circumference 350 to 860 mm. Bale width 900 mm Some coating cylinders. DRYER With circulating air up to 120°C Dryer length 2 x approx. 2.2  ...

Mettler Viscometet complete case with all attachments. The Rheomat RM180: is a portable, easy to use viscometer, used primarily for quality control and product development. It can be used manually using simple push buttons on the keypad or using a personal computer and optional software. The Rheomat can use concentric cylinders, TV spindles and ISO 2555 measuring systems. It uses a rechargeable battery for portability or in the laboratory it has it’s own stand and power supply. The data is displayed on the Rheomats’ Liquid Crystal Display and can be downloaded to printer or personal computer. Displayed instruction is available in English, French, Spanish, German, Italian or Dutch. Typical applications for the Rheomat include cosmetics, food and coatings.

WaterJet STM MasterCut was manufactured in 2010 by the well-known Austrian company Stein-Moser GmbH. The machine performs precision machining of workpieces up to 180 mm thick using a pressurised water jet. The workpiece cutting process takes place on a large work area made of high-quality welded steel, with a length of 3000 mm and a width of 2000 mm, guaranteeing high stability and reducing the vibrations generated during machining. A modern CNC control installed in the control panel allows programming of the operating modes and full control of the machine. The STM WS3020 water cutting machine is equipped with a 37 kW BHDT HYTRON high-pressure pump, supplying the machine with high-pressure water. Technical parameters of STM MasterCut water cutting machine - working space (L x W): 3000 x 2000 mm - maximum workpiece thickness: 180 mm - positioning speed: 15 m/min - accuracy of po ...

Manesty ? ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Interchangeable baffles to suit all processes A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Efficient CIP sy ...

Technical parameters Laser power 1000 W Laser source type optical fibre Source manufacturer MAX Photonics Length of laser waves 1064 nm Weldidng speed 0-120 mm/s Input current 230V 50Hz Kit includes: - Automatic wire feeder -Cooler 24 month warranty You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. B8a32e7mlf Laser welder LWH-1000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - Automatic Wire Feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 H ...

DEA SCIROCCO 151310 coordinate measuring machine built in 1997 in Italy, is used to make fast and highly accurate measurements of workpieces with complex shapes. Workpiece measurements are taken using contact or non-contact methods, which are then represented as a set of point coordinates. The dimensions of the measured workpiece are taken using the RENISHAW TP7M measuring probe, which is installed on the RENISHAW PH10MQ indexing head. The measuring probe uses strain gauge technology to eliminate granularity errors and achieve the highest measurement quality in the X,Y,Z axes with feeds of 1500 mm (X axis), 1300 mm (Y axis) and 1000 mm (Z axis). The measuring machine is offered with a wide range of equipment, including an advanced PC-DMIS package for Windows, performing detailed geometric measurements. The total weight of the machine is 3650 kg. Technical data of the DEA SCIROCC ...

SAF PLASMATOME 25 plasma cutting machine was built in 2000 in France. The machine, characterised by its rigid and robust design, is designed for precision cutting of sheet metal with a thickness of up to 45 mm. Thanks to the use of double drives on the longitudinal axis, high working speeds are obtained, which result in high quality and accuracy of machining. Workpieces are machined under a water sheet on a large work table measuring (L x W) 6000 mm x 2000 mm, using a cutting head powered by a powerful KJELLBERG PA-S45 W plasma source. The SAF AIR LIQUIDE PLASMATOME 25 plasma cutting machine is controlled by a control panel equipped with a multi-tasking CNC controller DIGISAF, allowing full control of the machine operation. Technical specifications of the SAF PLASMATOME 25 plasma cutting machine - CNC controller: DIGISAF - plasma source: KJELLBERG PA-S45 W - work table surface a ...

Trotec Speedy 400 Co2 Laser 80 Watt air-cooled Year of construction: June 2015 • Immediately ready for use • 6 months warranty on all machines Working area: 1,016 x 610 mm Max. workpiece height: 305 mm • Only 2853 operating hours Scope of delivery: • Trotec Laser Speedy 400 year 2015 • Software JobControl 11.4 / Ruby incl. license key •Connecting cable • Aluminum lattice table • Lens cleaner • Lentil cloths • Allen key set • Lens set •Manuals On request: • Unwinding device • Trotec extraction • Slat table • Engraving table • Honeycomb grid table • Training and commissioning • Delivery by transport company Dimensions: width/depth/height (approx.) 1400 x 950 x 1070 mm Air support: By using an air compressor heat and gases are removed from the cutting surface blown away, resulting in a better cutting result can ...

For sale is a NOVAPAC 75 M with laminar airflow system which was completely overhauled by NOVAPAC. Format is a 500 gram cup which is closed with a circuit board. In addition to the UV cups and blank disinfection using UV light, NOVAPAC added a laminar airflow system to keep the filling area clean. Price is a matter of negotiation and the system can currently still be viewed at the customer's premises. A NOVAPAC 75 M with laminar airflow system is being sold, which was completely overhauled by NOVAPAC. The format is a 500 gram cup that is closed with a circuit board. In addition to the UV cup and circuit board disinfection using UV light, NOVAPAC added a laminar airflow system to keep the filling area clean. The price is a matter of negotiation and the system can currently still be viewed at the customer's.

You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. Laser welder LWH-2000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual pla ...

BYSTRONIC BySprint Pro 3015 laser cutting machine built in 2011 in Switzerland, is designed for precision cutting and industrial engraving of metal sheets with maximum dimensions (length x width) of 3000 mm x 1500 mm. Workpieces made of mild steel, stainless steel and aluminium are processed with the highest precision using a 4.4 kW laser beam generated by a reliable BYSTRONIC ByLaser 4400 laser source. The laser is equipped, among others, with the BYSTRONIC ByVision CNC control with a touch screen for programming processing parameters, and the BYSTRONIC Byloader 3015 system, allowing for fast and safe loading and unloading of metal sheets on the work table. This combination simplifies the cutting process and maximises user convenience. The total weight of the machine is 12000 kg. Technical specifications of the BYSTRONIC BySprint Pro 3015 laser - laser power: 4.4 kW - maximum sh ...

Fischerscope XDLM 237 XRAY / X-ray fluorescence spectrometer XRAY spectrometer for non-destructive determination of layer thicknesses for all common metal coatings as well as other material analyses using X-ray fluorescence. Contact us if you have any questions about the previous application. The device is fully functional and will be reset to factory settings before delivery. All maintenance was carried out by the manufacturer's service team according to the manufacturer's specifications. Any repairs and acceptances were also commissioned from the manufacturer. It is a full protection device with the appropriate type approval. Periodic inspections in accordance with the requirements of the Radiation Protection Ordinance have always been carried out by approved experts.

Fully automatic high speed tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. The high number of cycles with up to 75 cycles per minute is achieved, among others, by using a timing belt drive instead of a timing chain. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Stamping characters for e.g. batch printing are integrated into the sealing jaw. Mitsubishi PLC, Weinview touch screen. - Specifications: max. speed of the machine in neutral: 75 cycles/minute (corresponds to: max. 150 tubes/minute) | filling range (one of the three ranges selectable): a) 5-25ml, b) 15-150ml, c) 30-200ml | accuracy: +/-1 ...

Fully automatic liquid filling machine with 6 filling heads for filling volumes of different alternative ranges e.g. 50-500ml ? customized configurations are possible. The volume is adjustable within the filling range by adaptation of the capacity of the air cylinder ? uncomplicated controlled by software, without using additional modules. Operating principle: feeding of the bottles via infeed conveyor, positioning of the bottles, feeding of the filling needles into the bottles, filling by filling lances, exact dosing controlled by air cylinders. Electronic components: PLC and Touchscreen by SIEMENS, optical sensors by Sick. Pneumatic parts predominantly by AIRTAC. CIP (cleaning in place system) is customizable via software and hardware. - Specifications: number of filling heads: 6 | max. speed of the machine in neutral: 35 cycles/minute | accuracy: depending on chosen filling range and  ...

Fully automatic liquid filling machine with 4 filling heads for filling volumes of different alternative ranges e.g. 50-500ml ? customized configurations are possible. The volume is adjustable within the filling range by adaptation of the capacity of the air cylinder ? uncomplicated controlled by software, without using additional modules. Operating principle: feeding of the bottles via infeed conveyor, positioning of the bottles, feeding of the filling needles into the bottles, filling by filling lances, exact dosing controlled by air cylinders. Electronic components: PLC and Touchscreen by SIEMENS, optical sensors by Sick. Pneumatic parts predominantly by AIRTAC. CIP (cleaning in place system) is customizable via software and hardware. - Specifications: Number of filling heads: 4 | max. speed of the machine in neutral: 26 cycles/minute | accuracy: depending on chosen filling range and  ...

Groninger vial line including labelling comprising ASVG 100 washing machine, container diameter from 16 up to 95 mm, container height from 33 up to 238 mm, capacity up to 3,000 vials per hour, Siemens SIMATIC S7-300, electrics 3x400V/50Hz, electrical power 3.5 kVA, vial infeed via DTE 1000 rotary infeed table (diamteter 1000 mm) under LF-unit, magazin outfeed under mobile LF-unit (The washed vials were collected in magazines and manually put into a dry heat sterilizer for sterilization. After sterilization the vials were transferred to the vial filler. The dry heat sterilizer is not part of our offer), DFVG 4001 intermittent vial filling & stoppering machine with LF-unit, container diameter from 14 up to 68 mm, container height from 30 up to 140 mm, pre & post gassing, 4 filling stations using rotary piston pumps, in-process control for checking the filling volume, Siemens SIMATIC S7-300 ...

4-head stand-alone linear weigher for weighing up to 1,000g. Including framework for small 2-/4-head weighing systems to avoid the transfer of machine vibration to the weigher. Without stairs, without handrail. Made of stainless steel (SUS 304). - Size will be customized. Button to open the weighing head when using the weigher for semi-automatic filling. - Specifications: Number of weighing heads: 4 | Volume per head: 2.4 L | accuracy: 0.5-5.0g | max. speed of the machine in neutral: 40 cycles/minute | power: 220V, 1kW | machine dimensions in mm: L920xW775xH(customized) | eight: 169 kg (without framework). Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for custo ...

Complete Large Vertical Filling System for premade bags. - Weighing range: 2.000 - 50.000g, max. speed of the machine in neutral: 16 cycles/minute. The system includes product elevator, automatic weighing machine, belt conveyor and bag sealding OR sewing machine. - For granule products like seed, pet food, etc.. The premade bags are clamped manually into the pneumatic clamping device. The product will be dosed by weighing and filled into the bag. By using the belt conveyor the filled bag will be passed to the sealing or sewing machine. - Platform- and In-/Outfeed-dimensions can be customized: Technical Specifications do depend on the final layout/construction of the complete system. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel fre ...