grinding machines used for sale

Key data: 1100 mm, 2

For sale due to workshop closure. Very neat wide belt sanding machine. VAT not reclaimable.

Brush diameter: 200 mmBrush width: 90 mmpower capacity: 1,0 kWconnected load frequency: 400 Vspeeds: 1450 / 2850 U/mintotal power requirement: 1,0 kWweight of the machine ca.: 25 Kgdimensions: 390 x 310 x 390 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6016 Type: S2-T233 Producer: VIET Created: 2005 Parameters: Operating hours: 1600 h Switching-on hours: 600 h Sanding belt length: 5090 mm Sanding belt width: 150 mm Vacuum bandwidth: 1350 mm Grinding roller: 190 mm 2 longitudinal grinding belts at the top 3 engines Cross loop unit

connected load frequency: 230 Voutput: 1,2 KWtaper diameter: 19mm mmturning speeds: 1000 - 3000 U/minroll surface width: max. 100 mmroll length: max. 120 mmweight: 2,8 kgrange L-W-H: 430 x 280 x 100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

oscillating belt sanding machine model VOLPATO NTS 150/C for wood edges, panels, furniture, doors, window frames and various second hand machine , like new , used very little working conditions : Excellent , like new CE regulation : Yes 45° tilting work table possibility of sanding curved pieces using the driven roller + small radius supplementary rollers diam.mm.25-30-35-40-45 mechanical oscillation with a dedicated motor via a connecting rod/crank system Technical data : Worktop mm.280 x 1000 Tiltable worktop mm.300 x 950 Sanding belt development mm.150 x 2580 Driven roller diam. mm.75 Additional worktop mm.300 x 300 Abrasive rolls available diam. mm.25-30-35-40-45 main motor power Hp 4 Motor for oscillation Hp 0.5 Oscillating stroke mm.20 Overall dimensions cm.182x105 H=cm. 150 volt. 380/50 Machine weight kg.400

internal diameter: 200 mmgrinding depth: 250 mmswing diameter: 330 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CALIBRATING SANDING machine SANDINGMASTER SCSB2-900 second hand machine max. working width mm.900 composed by n.2 belts ( 2 separate motors ): 1° belt . calibrating roller in rubber diam.mm.260 . motor power Hp 15 2° belt . pneumatic pad . motor power Hp 10 belt dimension mm. 1900 x 920 volt. 380/50 weigth kgs. 2000

width of the strips: 150 mmband length: 2000 mmband speed: 30 m/stotal power requirement: 3,6 kWweight of the machine ca.: 138 tdimensions of the machine ca.: 995 x 490 x 890 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatic TENONER machine BALESTRINI 2TAO machine for production of parts of chairs , sofà , bedrooms , furnitures . volt. 380/50

width of the strips: 75 mmband length: 2000 mmband speed: 30 m/s: 75 x 540 mmtotal power requirement: 3 kWweight of the machine ca.: 90 kgdimensions of the machine ca.: 995 x 415 x 890 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

calibrating sanding machine model LEVIGALTECNICA MIKRO SRTV/C mm.1000 second hand machine carpet in rubber max. working width mm.1000 machine composed by 1 belt combined : calibrating roller in rubber diam.mm.150 + pneumatic pad main motor power Kw 10 belt dimension mm. 2150 x 1030 feed speed of conveyor belt : n.02 speed m/min. 5 / 10 min. / max. working heigth mm. 3 / 165 volt. 380/50 weigth kgs. 800

width of the strips: 75 mmband length: 2000 mmband speed: 30 m/s: 75 x 540 mmtotal power requirement: 3 kWweight of the machine ca.: 90 kgdimensions of the machine ca.: 995 x 415 x 890 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CATALOG NO. 6985 TECHNICAL DATA - max width of the workpiece 300mm - height of the workpiece 200mm - unit: corrugated rubber roller + shoe + metal roller - working table 1230x440mm - belt 300x1900mm in advance: - rubber roller, sliding - aggregate about 7.5 kW - sliding roller, rubber from down: - pulling tape - pneumatic oscillation - 2 types of feed speed - feed motor 0.85 kW - diameter of the exhaust connection 110mm - dimensions length/width/height 1250/1000/1950mm - weight 530 kg – unpainted – used grinder - very good condition Net price: PLN 13900 Net price: 3124EUR Net price calculated according to the exchange rate of 4.45 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Table dimensions: 1200 x 500 mmsanding belt measurements: 90 mmWeight: 150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0116 Brand: GHERMANDI - ITALY Model: OLIMPIA 200 Bottom belt sanding machine for sanding wooden edges, profiles, battens, etc. Technical data: Working width mm 200 Table length mm 1240 Belt development mm 2000 x 200 Belt speed 17 mt/min Working table height mm 820 Motor Hp 4 Vacuum motor Hp 0,5 Overall dimensions mm 1240 x 600 x 1000 h Weight kg 350

max. width of grinding wheel: 100 mmdiameter / bore of grinding wheel: x mmFlange taper: x The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weibert KS30 Edge grinding machine with oscillation, rotary star and veneer cut with rotary star 60-100-120mm WEIBERT WJ-KS30 new 400V 3 KW (4 hp) n=2840 min Work table 960x350 mm Table height adjustment 230 mm Abrasive back wall 1050x200 mm Band speed 20 m/sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 hp) Can be switched on/off Machine table and guides made of GRAUGUSS Quick adjustment of the swivel 90°-45° with degree display Weight of 400 kg Suction nozzles 120 mm Rotary star with 3 additional contact rollers 60-100-120mm Bandwidth 150 mm WJ-R00200K1 Roller pull-out table widening

grinding length: . mmgrinding width: . mmworkpiece weight: . kggrinding wheel dia. (unused wheel): 400 mmslide stroke: Vertikal Z = 200 mmslide stroke: Horizontal X = 950 mmspeed: 30 m/mingrinding spindle drive: 10 kWworking spindle drive: 6,3 kWmax. workpiece diameter: 150 mmworkpiece width - max.: 32 mmgrinding wheel diameter: 400 x 120 x 65 mmgrinding wheel turning speeds: 0 - 3000 mm-1peripheral speed: 63 m/secwork piece spindle speed: 0 - 3000 min-1electrics - voltage/frequency: 400 / 50 V/HzControl: Siemens 840 Dsl total power requirement: 130 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 4,7 x 2,45x 2,2 mCNC-controlled plan-side grinderfor one-sided grinding of the end faces of ball cagesequipped with:- 2 Working/Grinding Stations and with a turning station in the Middle- CNC control Siemens Sinumerik 840 DslThe data for this ad was created with ModulMWS -  ...

Wood power KSO 150F Edge Grinder Grinding unit can be swivelled up to 45° via lever The machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better grinding results Oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable grinding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table widening With rubberized grinding roller Veneer edge grinding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved inlet ruler for veneer protrusions Quick changeover from veneer edg ...

grinding length: . mmgrinding width: . mmworkpiece weight: . kggrinding wheel dia. (unused wheel): 400 mmslide stroke: Vertikal Z = 200 mmslide stroke: Horizontal X = 950 mmspeed: 30 m/mingrinding spindle drive: 10 kWworking spindle drive: 6,3 kWmax. workpiece diameter: 150 mmworkpiece width - max.: 32 mmgrinding wheel diameter: 400 x 120 x 65 mmgrinding wheel turning speeds: 0 - 3000 mm-1peripheral speed: 63 m/secwork piece spindle speed: 0 - 3000 min-1electrics - voltage/frequency: 400 / 50 V/HzControl: Siemens 840 D total power requirement: 22 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 2,5 x 2 x 2,2 mCNC-controlled plan-side grinder with2 spindles with a turning station- CNC control Siemens Sinumerik 840 DThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OBSS 100 Spindle belt sander Working table length 430 mm Work table width 410 mm Speed 2000 min¯ ¹ Grinding sleeve diameter 13, 19, 26, 38, 51 mm Spindle diameter 12.7 mm Oscillation stroke 16 mm Oscillation 58 min¯ ¹ Belt length 610 mm, belt width 100 mm Bandumlaufgeschwindigkeit(en) 8 m/s Surface length 220 mm, width 100 mm Supply voltage 230 V 50 Hz Suction nozzle diameter 38 mm Length 480 mm, height 530 mm, width / depth 480 mm Weight 12 kg G & pieces 5903501 Option: Stand with door

grinding length: 1320 mmgrinding width: 730 mmweight of the machine ca.: 4,5 tworkpiece height: mmtotal power requirement: kWdimensions of the machine ca.: mautomatic infeeddigital read-outelectro magnetcoolant device with paper filteringdressing deviceTechnische Daten / technical details:gr. Schleiflänge / max. grinding length 1320 mmgr. Schleifbreite / max. grinding width 730 mmVertikalbewegung / vertical travel 480 mmSchleifscheibe/grinding wheel 350x50x127 mmMagnetgröße / electro magnet size 1200x600 mmGewicht ca. /weight ca. 4500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weibert WJ-KS26 Edge grinding machine with oscillation NEW MACHINE! 400V 3 KW ( 4 hp) S1 100% n=2840 min. Grinding table 750x300mm Table height adjustment 200mm Abrasive back wall 850x200mm Grinding belt dimension 2600x150mm Grinding unit swivelable 90°-45° with quick adjustment Band speed 20m/sec. Oscillation on and off motor 0.25 KW (0.34 hp) Central suction connection 120mm Manual adjusting m degree display! WJ-R00100 The following options included in the price! Roller pull-out table widening WJ-R00101 Miter stroke WJ-R00102 Driving device WJ-R00103 Feed machine 3 rollers 120mm with bracket special price

grinding length: 1320 mmgrinding width: 730 mmweight of the machine ca.: 4,5 ttotal power requirement: kWdimensions of the machine ca.: mworkpiece height: mmautomatic infeeddigital read-outelectro magnetcoolant device with paper filteringdressing deviceTechnische Daten / technical details:gr. Schleiflänge / max. grinding length 1320 mmgr. Schleifbreite / max. grinding width 730 mmVertikalbewegung / vertical travel 480 mmSchleifscheibe/grinding wheel 350x50x127 mmMagnetgröße / electro magnet size 1200x600 mmGewicht ca. /weight ca. 4500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850

grinding length: 1730 mmgrinding width: 930 mmweight of the machine ca.: 6,5 tworkpiece height: mmtotal power requirement: kWdimensions of the machine ca.: mautomatic infeeddigital read-outelectro magnetdressing deviceexhaustion devicecoolant deviceTechnische Daten / technical details:gr. Schleiflänge / max. grinding length 1730 mmgr. Schleifbreite / max. grinding width 930 mmVerfahrweg vertikal / travel vertical 550 mmMagnet / electro magnet 1600x800 mmSchleifscheibe / grinding wheel 400x60x127 mmAntriebsleistung Spindel /power capacity spindle 11/15 kWGewicht /weight 6500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0361 Brand: TB Model: 2A Universal 2-shaft sander for wood, aluminium, metals and various Technical Data Cast-iron sttructure Right shaft length mm 400 Left shaft length mm 400 Speed rpm 1400 Three-phase motor Hp 4,5 N° 1 inflatable roller 200 x 140 mm N° 1 inflatable roller 200 x 80 mm Overall dimensions mm 1500 x 400 x 1050 Weight kg 80

Oscillation: Ja ja / neintiltable up to: 45° GradMotor output: 2,4 kWsanding width: 150 mmgrinding band dimension: 150 X 2.280 mmgrinding speed: 2 Stück mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0362 Brand: BIESSE Model: REGAL 330 - CE Standard Automatic precision 3-belt calibrating sanding machine for veneer, custom-made furniture, window frames, solid wood, doors, panels and various - CE Standard Technical data: Working width mm 1350 Working thickness min/max mm 3/200 Sanding belts dimensions mm 1370 x 2620 Belt feed speed metres/min 5/10 Motor power 1° Group Hp 15 Motor power 2° - 3° Group Hp 15 Composition: 1° Group Calibrating Roller 2° Group Sanding Roller 3° Group Finishing Pad Automatic positioning of work table Pneumatic on/off on operating units Electronic belt oscillation Electronic thickness display Infeed and outfeed support rollers Operating pressure 6 bar Overall dimensions mm 1940 x 2290 x 2440 h Weight kg 2400

Motor output: 3 kWTable dimensions: 350 x 750 mmgrinding band dimension: 150 x 2.280 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.