299 offers demag

Category: 1405 cranes
Latest update: 19.03.2021 add to watchlist
approved
dealer
ankerimg
item-No.: 28411354
used
Seller: country-de

2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Category: 1402 other machines for mechanical handling
Latest update: 14.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157216890
used
Seller: country-it STOCKEUROSTOCK SRL
Location: 44100 Ferrara

OVERHEAD CRANE DEMAG 40 TON. X 18.6 M SPAN + 6.35 M CANTILEVER MHE - DEMAG DOUBLE GIRDER GANTRY CRANE, TYPE ZVPW, YEAR 2015.

Category: 1405 cranes
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158758210
New in: 1975
used
Seller: country-de Peter Jüttermann Werkzeugmaschinen
Location: D - Nordrhein-Westfalen

1 Demag electric chain hoist, usedLoading capacity: 1000 kg (2-strand) Main stroke: 5 m/ minFine stroke: 1.25 m/ minwith manual chassis and floor operation

Category: 1405 cranes
Latest update: 19.03.2021 add to watchlist
approved
dealer
ankerimg
item-No.: 28411375
used
Seller: country-de

1 factory-tested double girder overhead travelling crane Payload 10.000 kg Wingspan currently and possible about 11,500 mm Hook path Max approx. 8,000 mm Make ABUS/Demag Workshop examination 2016 with separate DEMAG two-rail wind plant trolley & single-sided catwalk Working speeds: Hoist 2-tier Trolley gear 2-speed Crane chassis 2-speed

Category: 1405 cranes
Latest update: 19.03.2021 add to watchlist
approved
dealer
ankerimg
item-No.: 28411417
used
Seller: country-de

1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min

Category: 1405 cranes
Latest update: 19.03.2021 add to watchlist
approved
dealer
ankerimg
item-No.: 28411234
used
Seller: country-de

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

Category: 1405 cranes
Latest update: 19.03.2021 add to watchlist
approved
dealer
ankerimg
item-No.: 28411275
used
Seller: country-de

1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Category: 1405 cranes
Latest update: 19.03.2021 add to watchlist
approved
dealer
ankerimg
item-No.: 28411346
used
Seller: country-de

1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min

Category: 1405 cranes
Latest update: 19.03.2021 add to watchlist
approved
dealer
ankerimg
item-No.: 28411236
used
Seller: country-de

1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

Category: 1405 cranes
Latest update: 19.03.2021 add to watchlist
approved
dealer
ankerimg
item-No.: 28411297
used
Seller: country-de

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Category: 1405 cranes
Latest update: 19.03.2021 add to watchlist
approved
dealer
ankerimg
item-No.: 28411309
used
Seller: country-de

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Category: 1005 cranes
Latest update: 26.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 138933368
New in: 1979
used
Seller: country-de Project Organisation Alexander Torlach GmbH
Location: 83395 Freilassing, Breslauer Strasse 41a
Price: VB 55 €

10 pcs. crane runway length approx. 9.5m long HEA 200/190 (s=6 mm) Crane rails 40 x 40 mm Accessories Available on request at an additional cost: - Circuit rail VAHLE Assembly On request, installation/assembly/recommissioning, also constructive changes (wingspan, hoisting unit, etc.), can of course be carried out by us in accordance with relevant regulations or with acceptance(s) throughout Europe. Visit A visit is possible at any time and at short notice, whereby the crane can also be tested under electricity if necessary. to ask? Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info.torlach EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with track connection and container loading ! - O ...

Category: 1408 drives
Latest update: 16.09.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 136736090
used
Seller: country-de Lippke Industriedienstleistungen
Price: 1.399 €

2 Mannesmann Demag Engine-Gear combinations Both combinations are made up of the same components, Mirror image, however.

Category: 1405 cranes
Latest update: 03.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 146720294
used
Seller: country-at AUER
Location: 4407 Steyr-Gleink

2 pieces of crane bottles

Category: 1405 cranes
Latest update: 30.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159173830
New in: 1980
used
Seller: country-de Christoph Busch GmbH
Location: Schiefbahn

: . Year: ca. 1980 lifting capacity: 9 t : moveable: ja : nach rechts und links The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1405 cranes
Latest update: 30.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157045697
used
Seller: country-de Christoph Busch GmbH

: 2 Stück im Paket lifting capacity: Magnet 1: 15 t lifting capacity: Magnet 2: 9 t width: ca. 1.200 mm length: ca. 650 mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1405 cranes
Latest update: 30.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157604144
used
Seller: country-de Christoph Busch GmbH

: Demag 25/5 t serial number: 121279 weight max.: t stroke: mm clamping width: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1405 cranes
Latest update: 30.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159074497
used
Seller: country-de Christoph Busch GmbH

: DEMAG : . : 20 Euro . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1900 general inventory
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160278203
used
Seller: country-de Surplex GmbH
Location: Deutschland, 73450 Neresheim
Price: used machinery auction RESALE 100 €

dimensions (l x w x h) approx.: 370 x 430 x 760 mm, weight approx.: 45 kg

Category: 1900 general inventory
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160278952
used
Seller: country-de Surplex GmbH
Location: Deutschland, 73235 Weilheim Teck

maximum capacity: 500 kg, throat: 1,300 mm, dimensions (l x w x h) approx.: 1,300 x 1,000 x 500 mm, weight approx.: 150 kg

Category: 1900 general inventory
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160278957
used
Seller: country-de Surplex GmbH
Location: Deutschland, 73235 Weilheim Teck

maximum capacity: 500 kg, throat: 1,300 mm, dimensions (l x w x h) approx.: 1,300 x 1,000 x 500 mm, weight approx.: 350 kg

Category: 301 injection moulding machines
Latest update: 07.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158795381
used
Seller: country-de Complast Gmbh
Price: VB 4.200 €

Demag Plastifiziereinheit SC Zylinder Ø50 zu Demag Ergotech - IU 1450 - Ø 50mm - Hubvolumen: 530 cm³ - Einspritzdruck: - Spritzteilgewicht - Schnecke: Einzug: 49,50mm Ausstoß: 49,30mm RSP: 49,93mm - Zylinder: Einzug: 50,00mm Ausstoß: 50,00mm - Voll funktionsfähig - Aus laufender Maschine ausgebaut

Category: 109 other metal working machines
Latest update: 30.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157817450
used
Seller: country-ch Muller Machines SA

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Max. Load: 500 kg Various accessories: Electronic hand held remote control

Category: 109 other metal working machines
Latest update: 30.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158219108
used
Seller: country-nl Mach4metal

Lifting capacity: 10000 kg Hoist height: 12000 mm Span length: 23600 mm Type: Overheadcrane   MACH-id 3133 MAKE   Demag TYPE  ZLK YEAR  2010 SPECIFICATIONS   Span  23.600 mm Height of lift  12.000 mm SWL / Kg   10.000 kg demag overhead crane  

Category: 109 other metal working machines
Latest update: 30.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218450
used
Seller: country-nl Mach4metal

Lifting capacity: 20000 kg Hoist height: 0 mm Span length: 24500 mm Type: Overhead crane   DEMAG Demag Overheadcrane 24500 x 20 ton MACH - ID 6331 Make: DEMAG YOP: 1997 Span24.500 mm Capacity Kg20.000 kg

Category: 109 other metal working machines
Latest update: 30.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218967
used
Seller: country-nl Mach4metal

Lifting capacity: 500 kg Hoist height: 3000 mm Span length: 4000 mm Type: Swivel Crane   Span  ca 4000 mm Height of lift   ca 3000 mm SWL / Kg   500 kg  

Category: 109 other metal working machines
Latest update: 30.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218746
used
Seller: country-nl Mach4metal

Other Info: Demag Single Beam MACH-id    4451 MAKE        DEMAG VAN DEN BERG TYPE           ELK YEAR          2006 SPECIFICATIONS Span          9330 mm Height of lift        10.000 mm SWL / Kg          10000 kg DIMENSIONS Length        11000 mm Width           2492 mm Height           1615 mm

Category: 1405 cranes
Latest update: 30.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157159293
New in: 1988
used
Seller: country-de Christoph Busch GmbH
Location: Scherfhausen

arm length: 2.200 mm height of hook: 2.600 mm weight of the machine ca.: 1,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1405 cranes
Latest update: 30.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159762821
used
Seller: country-de

arm length: 4000 mm total column height: 3900 mm weight max. in kg: 2000 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m K9F 0902 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1405 cranes
Latest update: 30.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156642177
used
Seller: country-de

arm length: 4000 mm total column height: 4200 mm weight max. in kg: 500 kg bottom edge arm: 3200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online