We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min
used
Manufacturer Demag Model D 1375/8000 Year 1996 capacity 1375 Ton Machine is in good condition
used
BRAND: SUMITOMO DEMAG YEAR: 2010 MODEL: 1300-8000 APPLICATION TYPE: INJECTION MOULDING LOCATION: PORTUGAL MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY GINDUMAC ID: PT-INJ-SUM-2010-00001 Technical Information GENERAL DATA MEASUREMENTS WIDTH: 14400 MM MEASUREMENTS DEPTH: 3400 MM MEASUREMENTS HEIGHT: 2900 MM MACHINE WEIGHT: 16400 KG INJECTION UNIT SCREW DIAMETER: 110 MM SHOT WEIGHT: 3976 GRS STROKE VOLUME: 4370 CM³ INJECTION PRESSURE: 1815 BAR CLAMPING UNIT CLAMPING FORCE: 13000 KN OPENING STROKE: 1500 MM MOULD HEIGHT MIN: 700 MM MOULD HEIGHT MAX: 1400 MM Additional Equipment - INCLUDE ROBOT MASTER MATTIC RB400CN
used
BRAND: SUMITOMO DEMAG YEAR: 2019 MODEL: SYSTEC 1300 1500-9500 SERVO PRODUCTION HOURS: 17522 APPLICATION TYPE: INJECTION MOULDING LOCATION: GERMANY MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY
used
Type of control: NC 4 Number of hours: 48,500 H Closing force: 1300 T Opening stroke: 1500 mm Screw diameter: 110 mm Screw length: 20 D cm3: 5797 Cores: 4 Robot interface: yes Bi metal: yes Others: 24 hot runners, wittmann DEMAG robot
used
This Sumitomo Demag Systec 1300 1500-9500 Servo Injection moulding machine was manufactured in the year 2019 and has 17522 production hours, of which 3695 are heating hours.
used
This SUMITOMO SHI DEMAG 1300-8000 injection moulding machine was made in 2010. The machine has a clamping force of 13000 kN and a screw diameter of 110 mm. It Includes a robot MASTER MATTIC RB400CN.
used
Molding machine of Mag Type: Ergotech 1300-12000 system, with rice robot control: NC4 year: 1996 Clamping unit Clamping force t: 1300 opening stroke mm: 1500 Holm dimension mm: 1500 x 1250 min/max height mm: 700/1400 Plate size: 2150 x 1880 injection unit Screw diameter mm: 130 injection weight gr: 6060 Injection volume cm 3: 6730 spray pressure bar: 1799 Dimensions and weights Dimensions Lxwxh m: 14.1 x 3.2 x 2.7 machine weight kg: 60,000/20,000 Miscellaneous Nuclear trains with rice robot EUROMAP 12
used
Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column
used
Injection unit Screw diameter: 35 mm Calculated injection volume: 154 cm3 Length/diameter ratio: 20 L/D Max. injection rate: cm3/s Material pressure: 2790 bar Closing unit Closing force : 1300 kN Distance between tie-bars: 520 x 520 mm Platen dimensions: 725 x 725 mm General Total installed power: 9.4 kW Other Equipment : Process INTELECT 2 FULL ELECTRIC 2 Hydraulic cores 1 AIR core EUROMAP 67 Commissioning: 2019 Hours: 3300 h Tonnage: 130
used
Crane motor, spare motor, electric motor, with brake, two speeds DEMAG KBA 80 A ( KBA80A ) 0,035 / 0,25 kW 400 / 1390 rpm 380 V 3AC 50 Hz Shaft diameter: Ø 19 mm Wavelength: 25 mm groove width: 6 mm Flange diameter: Ø 80 / 123 mm bolt circle diameter: Ø 100 mm 4x threaded hole: M6 x 1.0, depth: 10 mm used, tested ! Dimensions: 325 x 160 x 220 mm
used
Crane motor, spare motor, electric motor DEMAG KBA 80 A 4 R ( KBA80A4R ) 0,25 kW 1380 rpm 220 / 380 V Shaft:Ø 18 mm Flange: 125 x 125 mm used, tested ! Dimensions: 350 x 260 x 220 mm
used
Crane motor, spare motor, electric motor DEMAG KBA 71 B4 ( KBA71B4 ) 0,55 kW 1355 rpm 220 / 380 V shaft:Ø 16 mm Flange: Ø 125 mm / 140 x 140 mm hole spacing: 115 mm used, tested ! Dimensions: 310 x 205 x 140 mm
used
Crane motor, spare motor, electric motor DEMAG KBA 80 A 4 R ( KBA80A4R ) 0,25 kW 1380 rpm 220 / 380 V shaft:Ø 19 mm Flange: Ø 124 mm used, tested ! Dimensions: 320 x 160 x 220 mm
used
Crane motor, spare motor, electric motor DEMAG KBA 80 A 4 R ( KBA80A4R ) 0,25 kW 1380 rpm 220 / 380 V Shaft:Ø 19 mm Flange: 125 x 125 mm used, tested ! Dimensions: 350 x 160 x 220 mm
used
Crane motor, spare motor, electric motor DEMAG KBA 112 B 4 ( KBA112B4 ) 3,5 kW 1425 rpm 220 / 380 V Shaft:Ø 28 mm Flange: 250 x 250 mm without brake housing ! used, checked ! Dimensions: 435 x 315 x 290 mm
used
Gear motor DEMAG Type: S040-b3-11-0 with motor: KBL 71 A 4 0,25 kW 135 rpm 220 / 380 V IP54 shaft diameter: Ø 15 mm used, tested ! Dimensions: 360 x 150 x 230 mm
used
Gear motor DEMAG Type: S063 H-43-0 with engine: KBA 71 B 4 0,75 kW 135 rpm 230 / 400 V 3AC IP54 hollow shaft diameter: Ø 28 mm used, tested ! Dimensions: 510 x 155 x 210 mm
used
Electric motor, three-phase motor -Handover: in the current condition as seen -Brake: dismantled -Power: 1.8KW -Speed: 1375 rpm -Shaft: Ø 24 mm -Type: B5 -Protection class: IP 54 -Dimensions 360/200/H250 mm -Weight 19.5kg
used
Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650.5200 Model 2001 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot
used
Key data: 1100 kN
Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...
used
DEMAG JC-P 1600 KG pillar jib crane manufactured in 2016 is used in supporting unloading and assembly work, as well as for machine operation in areas with limited space requirements. The compact design with increased stability is equipped with an rotating mechanism controlled by an electric inverter and a highly built-in jib, allowing for particularly high hook heights. All of this makes the DEMAG JC-P 1.6 T pillar crane ensure fast work and high safety in handling workpieces with a maximum weight of 1600 kg. Technical data of DEMAG JC-P 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 5000 mm
used
Lifting capacity: 20000 kg Hoist height: 0 mm Span length: 24500 mm Type: Overhead crane DEMAG Demag Overheadcrane 24500 x 20 ton MACH - ID 6331 Make: DEMAG YOP: 1997 Span24.500 mm Capacity Kg20.000 kg
used
Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg
used
Compressor system composed of: Screw compressors Manufacturer: MANNESMANN DEMAG Type: 085 Rally Year of construction: 1992 Capacity: 7.9 m³ /min 3,000 min-1 45 kW Digital Screw compressors Manufacturer: MANNESMANN DEMAG Type: 085 Rally Year of construction: 1992 Capacity: 7.9 m³ /min Pressure: 75 bar 3,000 min-1 45 kW Compressed Air Refrigerant Dryer Manufacturer: MANNESMANN DEMAG Type: AD160AB Year of construction: 1993 Oil-water separator Type: ÖWAMAT 6 Compressed air tanks Manufacturer: LOHENNER Type: ZU47/21 Volume: 5,000 l Standing version Year of construction: 1993 Overpressure 11 bar