Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg

This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm.

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2002 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :555,796,350 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2002 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :555,796,350 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET250-840 Concept Year of Make: 2004 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 636 cm³ Moulded part weight: 579 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W633-931 2 pcs core train

This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. Its equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine.

Manufacturer: Demag Model: Ergotech 110/470-310 concept Year of Manufacture: 2005 Type of Machine : Injection Molding Machine Find more here - / Contact us at -  ...

• more information

Sumitomo Demag Systec 100/420-310 with the Sepro SR SDR11 S3 TRANS robot / hybrid machine Year of Make: 2013 Injection unit: Screw diameter: 35 mm Injection weight: 149 g Spray pressure: 2024 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving ...

clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump ca ...