used DEMAG ergotech 80

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

Demag Ergotech Viva 800-400 Shot weight: 205 g Closing force: 800 kN Screw diameter: 40 mm Injection pressure: 1830 bar Column spacing: 400 x 400 mm Plate size: 590 x 580 mm Mold height min: 250 mm Type of control: NC4 German Installed power: 26.1 kW Working hours: 70 180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m A string of cores

Demag Ergotech 800-310 Clamping/injection matrix Clamping force [kN] 800 Mounting plate dimensions (hxv) [mm] 540 x 540 Clearance between columns (hxv) [mm] 400 x 400 Injection unit Screw diameter [mm] 35mm Shot weight [g] 149 Injection pressure [bar] 2024 Electro-hydraulic equipment Power rating of the pump motor [kW] 15 Power rating of barrel heating [kW] 9,4 Dimensions and weight (approximately) Net weight with control cabinet [t] 3,6 Dimensions (L x W x H) [m] 4.05x1.27x1.91

Brand DEMAG Type ERGOTECH compact 800-310 year of construction 1996 Clamping unit clamping force 80 ton opening stroke 450 mm tie bar dimension (h x v) 400 x 400 mm Installation height min. 250 mm Platen size (h x v) 580 x 590 mm Injection unit Screw diameter 35 mm Injection volume 168 cm³ Injection weight PS 149 gr Injection pressure 2020 bar Dimensions and weights Dimensions LxWxH 3.9 × 1.4 × 1.9 m Machine weight 3700 kg

Brand DEMAG Type ERGOtech system 800-310 year of manufacture 1998 Clamping unit clamping force 80 ton opening stroke 450 mm Beam dimension (h x v) 370 x 370 mm Installation height min. 200 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 35 mm Injection volume 168 cm³ Injection weight PS 149 gr Injection pressure 2020 bar Dimensions and weights Dimensions LxWxH 4.1 x 1.4 x 2.0 m Machine weight 3700 kg

Molding machine of Mag Type: Ergotech 650-8000 system control: NC 4 year of construction: 1998 Clamping unit Clamping force t: 650 gap mm: 930 Min/max height mm: 450/950 injection unit Screw diameter mm: 110 Injection weight gr: 3930 Injection volume cm m³: 4372 Spray pressure bar: 1815 Miscellaneous 4 core pull 2 pumping sytems

Description Rotating Table Diameter: 1000 Table positions: 2 Hot channels: 8

Hydraulic pressure: 210bar, weight: 3.7t.

Ref. no.: 17195 Hersteller: DEMAG Year of construction: 1996 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 400 x 400 mm Mould height min.: 250 mm Platen size (h x v): 580 x 590 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 3,9 × 1,4 × 1,9 m Machine weight: 3700 kg

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 168 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 2020 bars CLOSING UNIT Closing force: 800 kN Opening stroke: 450 mm Mold thickness Mini / Max: 250 mm Max distance between tray: 700 mm Passage between columns: 400 x 400 mm Tray size: 580 x 590 mm GENERAL Heat output: 22 kW Total installed power: 30 kW Quantity of oil: 250 l. NC4 control Machine used exclusively in a clean room

Ref. no.: 17507 Hersteller: DEMAG Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Calibration - Ergocheck 1.2016 — Replacement of a faulty hydraulic system pressure sensor. scheme 1.2015 – repair of the nozzle rod. units 2.2014 — Replacement of the chamber, auger and tip 1.2013 — Replacement of the screw and tip 6.2012 – Repair, re-sealing of the injection cylinder. units 11.2010 — Repair of proportional valve 4.2008 — Replacing the control panel display 3.2008 — Replacing the proportional valve 3.2008 — Calibration — Ergocheck 12.2007 — Replacing the tip

Clamping unit Clamping force350 ton Opening stroke675 mm Distance between tie bars630 x 630 mm Mould height min.330 mm Mould height max.710 mm Platen size (h x v)950 x950 mm Injection unit Screw diameter70 mm Injection volume1212 cm³ Shot weight1090 g Injection pressure1877 bar Measurements and weight Dimensions6,5 x 1,9 x 2,2 m Machine weight 16000 kg this extra information is standard for this model. Please always double-check the details during a visit The DEMAG Ergotech System 3500-2300 NC4 Injection Molding Machine, introduced in 2002, exemplifies precision and efficiency in plastic molding technology. Renowned for its advanced features and superior performance, this model has become a cornerstone in the injection molding industry. At its core, the Ergotech System 3500-2300 NC4 excels in injection molding operations with unparalleled accuracy and speed. ...

Demag Ergotech 160/520-600 Santosh and Demag Ergotech 120-320 System Injection Moulding Machine Prefer to sell both together Price for both machines

This used DEMAG Ergotech System 1500-440/120 injection moulding machine was manufactured in 1999, equipped with handling features for enhanced productivity and ease of use. As an injection moulding machine, it offers reliable performance and precision in moulding operations, making it a valuable asset for production lines requiring high-quality plastic components. The opportunity to buy this DEMAG Ergotech System 1500-440/120 injection moulding machine represents a strategic investment for businesses looking to upgrade or expand their manufacturing capabilities. For more details, please contact us.

clamping force: 6500 kN injection volume: 2011 / 323 cm³ screw diameter: 80 / 45 mm platen size: 1450 x 1350 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection mould ...

Key data: 500 kN

Demag Ergotech Compact 500-200 / Machine in very good technical condition Year of construction: 1997 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 7.5 kW Total power: 22.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical te ...

Key data: 250 kN

Demag Ergotech Compact 250-80 Year of construction: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tie bar spacing: 280x280 mm Size of clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in � ...

This DEMAG Ergotech 150-610 Compact Injection Moulding Machine was built in the year 1998 and has 13860 pump hours. It is equipped with a Demag NC IV control unit. The machine has a clamping force of 1650 kN and a screw diameter of 40 mm.

Key data: 500 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 1998 Control: NC 4 Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3 m x 1.1 m x 1.6 m Weight: 2500 kg Screen text: German Additional equipment Core train: x1

Key data: 350 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 2000 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3.1 m x 1.1 m x 1.6 m Weight: 1800 kg Screen text: German Additional equipment Picker Air valve: x1

DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Built: 2003 specifications Screw diameter [mm]: 35 Spray weight [g]: 150 Spray pressure [bar]: 1865 Closing force [kN]: 1000 Tie bar distance [mm]: 420x420 Clamping plate size [mm]: 600x600 Tool installation height min. [mm]: 200 control Control: ERGOcontrol Monitor: Yes Control cabinet: Yes Language: Yes other Power [kW]: 46.7 Engine hours [h]: 67455 Dimensions [m]: 4.6x1.5x2.1 Weight [kg]: 6500 - KNIESCHLIESSEINHEIT - CORE TRAIN - EUROMAP - AIR VALVE

Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).

Key data: 350 , 78 , 30

Manufacturer: Demag Type: Ergotech 35/320 - 120 concept Year of construction: 2005 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar spacing: 320 mm x 320 mm Plate size: 460 mm x 450 mm Tool height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 30 mm Lifting volume: 88.3 cc / 78 gram PS Injection pressure: 1393 bar general Engine: 11 kW Heating: 8.3 kW Dimensions: 3.4 m x 1.2 m x 1.8 m Weight: 2750 kg Screen text: German Additional equipment Robot interface Core train: x1 Air valve: x1 Temperature control point for hot duct

warehouse no.: 503174 manufacturer: DEMAG type: ERGOtech 1000-420-310 controller: NC 4 year of construction: 2002 clamping force: 1000 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 600 x 600 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 35 mm swept volume: 168 ccm injection pressure: 2020 bar equipment included screen text german CEE-socket 16A complact flash drive core pulling hydraulically 1x air valve 1x machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A Schuko-socket 10A measures of machine l x w x h: 4.2m x 1.4m x 1.8m total weight: 3700KG technical data robot-system handling type: Linear manufacture: Wittmann controller: W7 ...