used DEMAG 20

DC motor with brake 31.5 kW Mannesmann DEMAG GCM 200 D2/0905 used, from spare parts warehouse 1x Mannesmann Demag GCM 200 D2/0905 DC motor with brake specifications: Type: GCM 200 D2/09005 365 V 31.5 kW 95.00 A 1800 rpm 60% ED Brake: 300.0 Nm Wave length: 115 mm Shaft diameter: 55 mm Space requirement LxWxH: approx. 1350 x 500 x 500 mm A total of 9 pieces are available - but not everyone is equipped with a speedometer (5 pieces available) please ask before purchase! The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8158

DEMAG EXTRA 200-840 ECQ (129) Without funnel Year of construction: 2007 Brand: Demag Specifications Spray weight: 400 g Clamping force 2000 kN Screw diameter: 50 mm Spray pressure: 1646 bar Spar spacing: 580 x 580 mm Clamping plate size: 860 x 860 mm Power: 45 kW Weight: 9000 kg Dimensions: 6.7 x 1.8 m Toggle lever locking unit: Yes

Chassis with friction wheel drive for light crane system DEMAG / TEREX suitable for crane rails made of system profiles type KBK 2 and KBK II L Type: DRF 200-B14-1-43 Fabr. No: 45602019 Travel speed: approx. 40 m/min = 0.67 m/sec Motor power: 0.75 kW Mains connection: 400 volts, 50 Hz. - Drive motor DEMAG / TEREX, type ZBA 80 A2 B007 KBK 2 / KBK2L Carriage for hanging in the crane rail Roller diameter: 82 mm Track roller width: 21 mm Carriage width: 78 mm Space requirement L x W x H: 470 x 320 x 490 mm Weight: 34 kg good condition; used

Demag EXTRA 200-840 ECQ, without hopper Make: Demag Type: EXTRA 200-840 Construction year: 2007 Steering: NC4 Location: Poland Country of origin: Poland Screw diameter 50 mm Stroke volume: 442 cc Shot weight: 400 g Injection pressure: 1646 bar Closing force: 2000 kN Distance between bars: 580 x 580 mm Clamping plate size: 860 x 860 mm Power: 45 kW Dimension: 6.7 x 1.8 m Weight: 9000 kg Furnishing Robot interface: EUR 67 Air valve: 1x

Key data: 500 kN

Demag Ergotech Compact 500-200 / Machine in very good technical condition Year of construction: 1997 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 7.5 kW Total power: 22.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical te ...

Demag hose pouring machine type: Ergotech 500-200 systems control: NC 4 construction year: In 1999 Schliesseinheit Schliesskraft t: 50 opening ways mm: 400 cross-beam measure mm: 355 installation heights min / max. mm: 210 record size: 520 x 520 hose unity snail diameter mm: 30 hose weights gr: 94 hose volumes cm?: 106 hose pressure cash: In 1995 mass and weights dimensions LxBxH m: 3.6 x 1.4 x 1.8 machine weight kg: 2900 other 1 x nuclear trains

Key data: 600 , 52 , 25

Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 60/420-200 Bau-year year: 1999 Control/Controller: NC 4 Control Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 570 mm x 600 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 25 mm Lifting volume/shot volume: 61 cc/52 gram hp Spez. Spray./injection pressure: 2740 bar General General Motor/Motor Power: 22 kW Heating/heating power: 8.3 kW Dimensions: 3.7 m x 1.6 m x 2.1 m Weichtt/Weight: 3900 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core train x1 Air valve x3

Demag Extra 200-840 Injection moulding machine The Machine is in perfect condition

E-chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DI with Dematik BUS control via crane system control Fabr. No.61456646 Year of construction 2003 Payload: 200 kg Hook travel: 4.0 meters Main lifting speed: 14.0 / 19.2 m/min. Fine lifting speed: 0.20 m/min. Chain size 4.2 x 12.2 mm 1 load line = 200 kg - with control logic DKES2/5 500V - without crane operation - Dematik BUS control via crane system control - without roller chassis Mains connection: 400 volts, 50 Hz Rated power: 750 W Rated current: 2.4 A good condition; used

Injection molding machine Manufacturer: DEMAG Type: ERGOTECH 200-840 COMPACT Year of construction: 1995 Machine number: 877 0165 Operating voltage: 3 x 400 V Frequency: 50 Hz Rated current: 89 A Clamping force: 2000 kN Locking force: 2200 kN Opening distance: max. 575 mm Tool installation height: min. 310 mm Tool installation height: max. 660 mm Maximum distance between tool mounting plates: 1235 mm Tool clamping plates: 830 x 830 mm Highlight column spacing: 560 x 560 mm tool weight: 2500 kg weight proportional to movable tool mounting platens: 1700 kg Hydraulic ejector: Ejector displacement: 180 mm Ejector force: 80 kN Ejector retraction force: 35 Injection unit: 840 Screw diameter: 60 mm Injection pressure: 1351 bar Displacement: 636 cc Moulded part weight: 570 g Dosing distance: max. 225 mm Nozzle travel: max. 440 mm Nozzle immersi ...

Manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley, girder trolley, overhead trolley -Demag friction wheel type: RF180 -Barrier width: 120 mm -Payload: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley, girder trolley, overhead trolley -Transfer in current condition as seen -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 -Barrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -The trolleys are pushed into a steel beam -Payload: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Glass ruler, glass ruler, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display, linear encoder -Manufacturer: Sino Skantek, glass scale from injection molding machine Demag D 100-275 NC -Type: KA 200/1600 -Measuring length: 1600 mm -Dimensions: 1770/70/H35 mm -Weight: 3.3 kg

Ref. no.: 17516 Hersteller: DEMAG Year of construction: 1998 Clamping unit Clamping force: 100 ton Opening stroke: 500 mm Distance between tie bars: 420 x 420 mm Mould height min.: 250 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 25 mm Injection volume: 61 cm³ Shot weight: 54 g Injection pressure: 2752 bar Measurements and weight Dimensions: 4,2 x 1,4 x 2,0 m Machine weight: 4200 kg Additional information & extras Core pull: 1 pcs

Machine: DEMAG 200T BI MAT 610H / 120 BI MAT Year: 2000 Control type: NC4 Number of hours: 31 500H Closing Closing force: 200T Opening stroke: 500 mm Between columns: 610 x 610 mm Tray dimensions: 830 X 830 mm Mini / maxi mold: 310/660 mm Max distance between plates: 1235 mm Injection: Screw diameter: 45/25 mm Screw length: 20 D cm3: 322/61 Bars: 1900/2006 General: Motor power: 30KW Heating power: 13KW Closing weight: 10T1 Dimensions length: 5M70 Dimensions width: 1M70 Dimensions height: 2M10 Options: Cores: 2 Robot interface: YES Bi metal: YES Others: turntable, 2 blow guns

Demag Ergotech 2000-840 Clamping/injection matrix Clamping force [kN] 2000 Mounting plate dimensions (hxv) [mm] 830 x 830 Clearance between columns (hxv) [mm] 560 x 560 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 636 Shot weight [g] 570 Injection pressure [bar] 1351 Dimensions and weight (approximately) Net weight with control cabinet [t] 10 Dimensions (L x W x H) [m] 5.70x1.70x2.10

Brand DEMAG Type ERGOtech system 1000-200 year of manufacture 1998 Clamping unit clamping force 100 ton opening stroke 500 mm beam dimension (h x v) 420 x 420 mm Installation height min. 250 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 25 mm Injection volume 61 cm³ Injection weight PS 54 gr Injection pressure 2752 bar Dimensions and weights Dimensions LxWxH 4,2 x 1,4 x 2,0 m Machine weight 4200 Kg Additional information & extras Core pull 1 pc.

Producer DEMAG Type 60/420-200 NC5 Year 2006 Clamping unit Clamping force 60 ton Opening stroke 600 mm Distance between tie bars 420 x 420 mm Mould height min. 200 mm Opening width 750 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 25 mm Injection volume 61 cm³ Shot weight 54 g Injection pressure 2752 bar Measurements and weight Dimensions 4,1 x 1,4 x 4,2 m Machine weight 3950 kg The machine received a new cylinder and a new screw in December 2022

Key data: 800 kN

Demag Ergotech Compact 800/420-200 Year of construction: 2000 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 400x400 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine was not in use in an ongoing production. This was only used to test the tools It is possible to change the screw diameter Metrics: Weight: 4000 kg Length/Width/Height: 3.90x1.40x1.90 m Drive: Pumps/motor: 18.5 kW Heating capacity: 7.5 kW Total power: 26 kW All offered machines are started by our service technicians before they are sold. It is possible to  ...

Molding machine of Mag Type: Ergotech 50-200 Control Panel: NC 4 year of construction: 1993 Clamping unit Clamping force t 50 Gap mm: 400 Holm dimension mm: 320 x 320 min/max height mm: 210 Plate size: 530 x 540 Injection unit Screw diameter mm: Gr 25 injection weight: 54 Injection volume cm m³: 61.3 Spray pressure bar: 2740 Dimensions and weights Dimensions Lxwxh m: 3.7 X 1.4 X 1.7 machine weight kg: 3250 Miscellaneous HEATING CHANNEL CONTROL 4 COMPARTMENT

clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in ...

Production year: 2004 Control: NC4 Injection unit: .../200 Screw diameter: 25 mm Specific injection pressure: 2400 bar Injection volume: 61 cc Injection weight: 54 g Tool closure system: .../500 Clamping force: 50 t Tool plate dimensions: 520 x 520 mm Distance between columns: 355 x 355 mm Tool height: 210 mm Opening distance: 400 mm Max.Distance plates: 610 mm General data: Pick-up date: Immediate Dimensions (m) LxWxH: 3.7 m x 1.4 m x 1.8 m Weight: 2900 kg

Control type: NC4 Closing force: 200T Opening stroke: 500 mm Between columns: 610 x 610 mm Tray dimensions: 830 X 830 mm Mini / maxi mold: 310/660 mm Max distance between plates: 1235 mm Screw diameter: 45/25 mm Screw length: 20 D cm3: 322/61 Bars: 1900/2006 Motor power: 30KW Heating power: 13KW Closing weight: 10T1 Cores: 2 Robot interface Bi metal Others: turntable, 2 blow guns

Screw diameter: 50 mm Calculated injection volume: 530 cm³ Length/diameter ratio: 20 L/D

Description Rotating Table Diameter: 1000 Table positions: 2 Hot channels: 8