used DEMAG dc

INJECTION MOULDING MACHINE DEMAG DC320 with the following characteristics: Press: 350 ton Platens : 700x700mm Capacity: 2.5kg/shot The machine is in top excellent condition with only a few months of operation time. - Condition: top excellent - Can be shown under power - Reason for sale: commercial * Screw diameter: 45mm * Tie bar spacing (H) & (V): 720 x 650 mm * Shot volume in cm3: 360 cc * Pressure on material: 2400 bar

Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650.5200 Model 2001 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot

Key data: 1100 kN

Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...

DEMAG JC-P 1600 KG pillar jib crane manufactured in 2016 is used in supporting unloading and assembly work, as well as for machine operation in areas with limited space requirements. The compact design with increased stability is equipped with an rotating mechanism controlled by an electric inverter and a highly built-in jib, allowing for particularly high hook heights. All of this makes the DEMAG JC-P 1.6 T pillar crane ensure fast work and high safety in handling workpieces with a maximum weight of 1600 kg. Technical data of DEMAG JC-P 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 5000 mm

Lifting capacity: 20000 kg Hoist height: 0 mm Span length: 24500 mm Type: Overhead crane   DEMAG Demag Overheadcrane 24500 x 20 ton MACH - ID 6331 Make: DEMAG YOP: 1997 Span24.500 mm Capacity Kg20.000 kg

Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg

Compressor system composed of: Screw compressors Manufacturer: MANNESMANN DEMAG Type: 085 Rally Year of construction: 1992 Capacity: 7.9 m³ /min 3,000 min-1 45 kW Digital Screw compressors Manufacturer: MANNESMANN DEMAG Type: 085 Rally Year of construction: 1992 Capacity: 7.9 m³ /min Pressure: 75 bar 3,000 min-1 45 kW Compressed Air Refrigerant Dryer Manufacturer: MANNESMANN DEMAG Type: AD160AB Year of construction: 1993 Oil-water separator Type: ÖWAMAT 6 Compressed air tanks Manufacturer: LOHENNER Type: ZU47/21 Volume: 5,000 l Standing version Year of construction: 1993 Overpressure 11 bar

Electric hoist, crane, electric wire rope hoist, cable winch DEMAG type P 10 Fabr. No. 941 477 Year of manufacture 1962 Load capacity 2000 kg with 4 strings Lifting height 5 meters Hoisting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 volts, 50 Hz - Hoist DEMAG, type 19/11 K28P - Electric chassis DEMAG, type 13 / 6 K8 - 1 travel speed approx. 19 m/min - Chassis for double T-beams, beam width 120 to 180 mm - Load hook for 4 load trains - Control bottle for the hoist with approx. 2.5 meters cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg good condition; used

1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min

Key data: 31 , 2800

DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: M7odp Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 Speedometer ATTENTION But the connector (Tacho - motor) is missing Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 2 pieces are available The motors are all in a comparable state - the attached images are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8160

Key data: 31 , 2800

DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 speedometer Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 6 pieces are available The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8159

DC motor with brake 31.5 kW Mannesmann DEMAG GCM 200 D2/0905 used, from spare parts warehouse 1x Mannesmann Demag GCM 200 D2/0905 DC motor with brake specifications: Type: GCM 200 D2/09005 365 V 31.5 kW 95.00 A 1800 rpm 60% ED Brake: 300.0 Nm Wave length: 115 mm Shaft diameter: 55 mm Space requirement LxWxH: approx. 1350 x 500 x 500 mm A total of 9 pieces are available - but not everyone is equipped with a speedometer (5 pieces available) please ask before purchase! The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8158

Electric chain hoist make DEMAG type PK 2 NFFabr. -No: 1523998 Year of construction 1987Capacity: 500 kgLifting height: 3.0 mLifting speed: 5.0 mFine lifting speed: 1.25 mMotor power: 0.5 / 0.13 kWWith- fine lift- 2-stranded- Electric lifting magnet Mannesmann / Demag R27 / 220xa0xa0 -No: 128122, rated current 0.75 A, Drm. Magnet 250 mm- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested double girder overhead travelling crane Payload 10.000 kg Wingspan currently and possible about 11,500 mm Hook path Max approx. 8,000 mm Make ABUS/Demag Workshop examination 2016 with separate DEMAG two-rail wind plant trolley & single-sided catwalk Working speeds: Hoist 2-tier Trolley gear 2-speed Crane chassis 2-speed

Demag Ergotech 160/520-600 Santosh and Demag Ergotech 120-320 System Injection Moulding Machine Prefer to sell both together Price for both machines

DEMAG EXTRA 200-840 ECQ (129) Without funnel Year of construction: 2007 Brand: Demag Specifications Spray weight: 400 g Clamping force 2000 kN Screw diameter: 50 mm Spray pressure: 1646 bar Spar spacing: 580 x 580 mm Clamping plate size: 860 x 860 mm Power: 45 kW Weight: 9000 kg Dimensions: 6.7 x 1.8 m Toggle lever locking unit: Yes

DEMAG OVERHEAD CRANE 40ton x 34 M SPAN + 5.2 ,M CANTILEVER MHE-DEMAG DOUBLE GIRDER GANTRY CRANE TYPE ZVPW YEAR 2011

OVERHEAD CRANE DEMAG 40 TON. X 18.6 M SPAN + 6.35 M CANTILEVER MHE - DEMAG DOUBLE GIRDER GANTRY CRANE, TYPE ZVPW, YEAR 2015.

Other Info: Demag Single Beam MACH-id    4451 MAKE        DEMAG VAN DEN BERG TYPE           ELK YEAR          2006 SPECIFICATIONS Span          9330 mm Height of lift        10.000 mm SWL / Kg          10000 kg DIMENSIONS Length        11000 mm Width           2492 mm Height           1615 mm