Manufacturer:
(Category: 108)
Protection level: 4 - 12 MPower supply: 2 x CR2032 weight: 460 Grammdimensions: 250 x 270 x 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 450 mmtable load: waagerecht 300 Kgtable load: senkrecht 150 Kgtable turning speeds: 0,2- 2 U/minvoltage: 230 V / 50 Hztotal power requirement: 0,55 kWweight of the machine ca.: 80 KGdimensions of the machine ca.: 0,65 x 0,5 x 1,0 m• unused stock machine• manual tilt adjustment• Start-Stop by foot switch• with CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 590 mmtable width: 590 mmtable load: 200 Kgtable turning speeds: 0,23 - 2,3 U/mintable height: 650 mmtotal power requirement: 0,55 kWweight of the machine ca.: 600 KgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
manually operated, air-cooled Rated power at 50%ED: 2.4kVA Short circuit current: 7.5kA Electrode force max.: 180daN Projection: 250mm --- equipped with: - 5m connection cable - Standard electrode arms 250mm Control RS15 (optional) --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
specifications: - Welding current 300 A 60% ED - 230 A 100% ED - Welding current adjustable from 10 A to 300 A - Current consumption 400 V / 19.5 A / 10.7 kVA - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 600 x H 900 x D 1000 mm - Weight approx. 180 kg
Layer-reeled solid wire for welding under inert gas in all positions. Shielding gas types: Ar, CO2 / Ar, CO2, O2 / CO2. Welding wire roll MAG wire electrode, unused, original shrink-wrapped in foil, ovp in cardboard! 15kg 1.2mm Manufacturer Union Type A600IG Probably for deposition welding Multiple available. For complete acceptance special price! Special price!
specifications: - Welding current 315 A 80% ED - 280 A 100% ED - Welding current adjustable from 50 A to 315 A - Current consumption 400 V / 19.5 A / 10.7 kVA - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 600 x H 900 x D 1000 mm - Weight approx. 200 kg
Rated power at 50%ED: 35kVA Short circuit current: 19kA Electrode force: 300daN / single stroke Projection: 395mm --- Welding control: WS 708 (7 times, 8 program) --- Incl. additional options: - Foot switch - Pressure-free lowering of the upper fitting - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
cutting range for steel to: 76 mmcapacity at 100%: 51 mmcutting medium: 400 Ampregulated drive: 50-150 und 100 - 400 AmpSteuerSteuercontrol voltage: 24 Voltweight of the machine ca.: 750 kgdimensions of the machine ca.: 82 x 122 x 930 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1300 mmtable load: 7.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M24 Tilt Angle: 90-180-100 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 3.050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table-size: 300 x 300 mmfrequency: 20 kHzcontrol: HS DIALOG 2012 control: active control connected load: 4,5 kW= ultrasonic welding machine -- price new 36.000,00 EUR -The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 960 mmtable load: 3.500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M20 Tilt Angle: 70-90-180 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 1.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 715 mmtable load: 500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-110 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 675 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 33 Positionenweight: 52 kgcondition: neu : 28 mmP-Set 1:27 pieces, 28mm system (15mm), consisting of:Clamps: 5 Sk. 100 / 350mmStop: 2 pieces 500mmStop: 2 pieces 150mmAngle: 2 pieces 175 x 175mmFlat angles: 2 pieces. 350 x 250mmFlat angles: 2 pieces 275 x 150mmEccentric discs 2 pcs. 100mmQuick release bolts: 10 pcs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine type bolt welding system Make SOYER Type BMS-8N Connection voltage 1 x 230 volts Welding range M 3 – M 8 3 – 7.1 mm Ø Material steel, stainless steel, Aluminium, brass Welding process peak ignition According to DVS leaflet 0903 Current setting infinitely variable Welding time 1,000 – 3,000 ms Welding sequence 20 bolts / min., depending on the bolt diameter Pistol positioning welding pistol Dimensions W x H x D 320 x 300 x 120 mm Hedging 16 amps Weight 10 kg Age 12 months Condition workshop tested, as new, incl. UVV test report Scope of delivery bolt welding device with the following accessories: 1 piece welding gun PS-1K 2 pieces ground cable 3 mtr. long 1 piece transport case 1 piece user manual Warranty 24 months from the date of delivery List original price 2.490,00 € + VAT Price kpl. with above a ...
Machine type MIG/MAG welding system Make OERLIKON Type Citomag 506 W Connection voltage 3 x 400 volts Adjustment range 30 - 500 Ampere Switching time 60 % ED at 500 amps 100% ED at 420 amps Current setting infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed gearbox gearboxed 4-roll gearbox Protection up to a maximum of 300 A = 32 A over 300 A = 63 A Dimensions L x W x H 1,050 x 630 x 1,050 mm Weight 237 kg Age approx. 20 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box kpl. Equipped 1 piece user manual ...
Storage number: 3590 CONTAINER ROTARY DEVICE Manufacturer: HENDRIKS, Type: 100 T Machines NR.: 06, Built: 2009 specifications: Size workpiece weight 100000 Kg Diameter 4800 mm Rolls slide. 700 mm Rolls width 480 mm Stepless rotations m/min Engine power 2 x 0.75 kw Drive rollers 1 pc Running rollers 1 pc Length: 3900mm (3700), Height: 1200 mm, Width: 1300 mm (900), Weight: 5000 kg
specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 ...
Machine type point welding pliers Make TECNA Type Power Pointer 7902P - Pulse Connection voltage 1 x 400 V switch-on time 50% ED at 2.5 kVA current setting infinitely variable max. pointable material thickness 2.5 + 2.5 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 8.2 kVA discharge min. 125 mm max. 500 mm Special accessories incl. pulse current, especially for galvanized sheets Weight 13 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,490.00 + VAT Price €890.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 € ...
Machine type point welding pliers Make TECNA Type Power Pointer 7900 Connection voltage 1 x 400 V switch-on time 50% ED at 2.0 kVA current setting infinitely variable max. pointable material thickness 2.0 + 2.0 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 7.2 kA discharge min. 125 mm max. 500 mm Weight 12 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,210.00 + VAT Price €720.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 € Item No. n353.5.3910 Electrode sharpener for hand cutting 129.00 € Item ...
Weibert X 134 welder Electrode diameter: 1.5 -2.5 mm Setting range TIG: 5-130 A Mains voltage: 230V, 50 Hz in a suitcase Welding cable with electrode holder Ground cable with ground clamp Hand shield with welded glass wire brush G&1091
specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 ...
Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 451 KW Connection voltage 3 x 400 volts Adjustment range 25 - 450 amperes Switch-on time 40% ED at 450 amperes 60% ED at 420 amperes 100% ED at 340 amperes Current setting 42 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 200 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part bo ...
Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 KW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 190 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 504 W, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece use ...
Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 1.135 mm Weight 210 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box k ...
• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table
oven 650 1.0x1.0x5m bogie 6 zones PLC data monitoring Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorwärmen Schmieden ...
Post welding wire and electrodes approx. 1,000kg New, unused, original packaged. Posten Welding accessories consisting of Welding dredging roller for inert gas welding machine MIG MAG Predominantly welding wire diameter 1.2mm, per roll 15kg z.B. Union A 600 IG Various electrodes e.B. Nickel A Originally packed in a cardboard box and sealed by welding in kunsstof film. Special price
Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 160 Connection voltage 1 x 230 volts Adjustment range 15 - 160 amperes Switch-on time 25% ED at 150 amperes 60% ED at 90 amperes 100% ED at 80 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 150 x 240 mm Weight 6 kg Age 12 months Special accessories Carrying strap Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 ...
WMT GmbH & Co. KG
