Manufacturer:
(Category: 108)
number: 124 bore: 28 mmweight: 326 kg4-283500consisting of:- 14x Professional screw clamp - nitrided -- 10x Professional screw clamp 45°/90° - nitrided- 8x Prism Ø 50 135° with screwed-in collar - nitrided- 36x Quick-clamping bolts without groove, double - burnished- 8x magnetic clamping bolts 68 - aluminum- 12x universal stop 150 L - nitrided- 12x universal stop 225 L - nitrided- 4x universal stop 500 S - nitrided- 12x stop and clamping bracket 175 L - nitrided- 2x stop and clamping bracket 300 G - nitrided- 2x stop and clamping bracket 500 G - nitrided- 1x stop and clamping bracket 500 G with rotation angle left - nitrided & stop and clamping bracket and clamping bracket 500 G with rotation angle right - nitrided- 1x stop and clamping bracket 750 G left - nitrided & stop and clamping bracketClamping bracket 750 G right - nitrided- 1x stop and clamping bracket 800 GK left - nitrided ...
table length: 3000 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 1075 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 32 bore: 28 mmweight: 51,2 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight: 1425 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 22 mmweight: 214 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mmSide panel height: 200 mmwork height max.: 850 mmweight: 850 kgProduct description:Siegmund retro offer incl. accessories:>- high-quality steel S355J2+N + plasma nitriding- Side panel holes in diagonal grid- Corners, edges and drill holes chamfered 45°- Construction reinforced with ribs- incl. basic foot equipment (working height 850 mm)Accessories:- 6 x Professional screw clamp, nitrided- 12 x quick-release bolts without groove, double burnished- 8 x universal fence 225 L nitrided- 2 x stop and clamping bracket 175 L nitrided- 2 x stop and clamping angle 500 G nitrided- 1 x accessory set - Eccentric stop Ø 60 with M10 thread nitrided - Hexagon socket wrench size 6 - Brush Ø 30 with protective cap - CleanBasic 1 liter in spray bottle - Anti-stick 1 l ...
table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 392 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmweight: ca. 1.553 kgProduct description:Siegmund Retro Offer: Welding table as it was 25 years ago, additionally with plasma nitriding and current table feet.Welding table:- High-quality steel S355J2+N + plasma nitriding 200- Holes surface 100x100 mm grid- Corners, edges, and holes 45° chamfered- Holes side panel in diagonal grid- Construction reinforced by ribs- Includes basic foot equipment (working height 850 mm)Accessories:- 6 x professional nitrided screw clamps- 12 x quick-release bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping angle 175 L nitrided- 2 x stop and clamping angle 500 G nitrided- 1 x accessory set - Eccentric stop Ø 60 with M10 thread, nitrided- Allen key size 6- Brush Ø 30 with protective cap- CleanB ...
CNC Plasma Cutting Machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x Plasma torch with power source Kjellberg HiFocus 280i neo Automatic gas console Donaldson DFPRO 6 Cyclopeel filter system Cutting software Omniwin Standard Availability: immediately
table length: 1200 mmtable width: 1200 mmtable height: 150 mmbore: 22 mmweight: 395 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
current intensivity: - Avolt: 230 Vtotal power requirement: - kWweight of the machine ca.: 70 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 96 Positionenweight: 600 kgcondition: neu : 28 mmSpecial 31-piece set, 28mm system, consisting of:1x Tool trolley10x Locking pins10x Ball lock pins3x Professional screw clamps, 300 x 150mm3x Professional screw clamps, 300 x 200mm2x Professional pipe clamps, 180°2x Professional pipe clamps, 45°Material: Burnished quality steelATTENTION! Tools are designed for 25mm thick tabletops.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 600 mmtable load: 250 Kgswivelling range: 0 - 135 Gradturning speeds: 0,03 - 2,0 U/minconnected load frequency: 400 Vweight: 0,4 tDimensions (LxWxH): 1,1 x 0,9 x 1,0 mWelding turntable including:- Foot switch- Wired remote control- 315mm chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Vario matic Rotation / Angle- Remote control with Dro- Very littles used- incl. 2000 mm false chuck - CE-Marked
Inv. Num. : 8914 Type: MA 1400 - DX 100 Producer: Yaskawa Created: 2012 Parameters: Maximum arm reach: 1434 mm Number of axles: 6 pieces Maximum load capacity: 3 kg Machine weight: 130 kg
Inv. Num. : 8913 Type: IRB 1600/1.45-8/M200 Producer: ABB Created: 2013 Parameters: Maximum arm reach: 1450 mm Number of axles: 6 pieces Maximum load capacity: 8 kg Machine weight: 250 kg
Two nearly identical Rofin laser machines are available. Wavelength: 10600nm, operating power: 4kW, max. pulse power: 8kW, pulse duration: 0.5ms, laser type: CO2 slab laser, cooling: diffusion cooling, max. pulse frequency: 5000Hz, polarization: linear, excitation: RF, gas type: premix. Machine dimensions X/Y/Z: approx. 2300mm/1000mm/1900mm, weight: approx. 1700kg. Documentation available. On-site inspection is possible.
Inv. Num. : 6169 Type: Motoman DX 100 Producer: YASKAWA Created: 2011 Parameters: Switch-on hours: 12800 h Operating hours: 6000 h Axle number: 6 Max. horizontal reach: 1717 mm Min. vertical reach: 3063 mm Maximum load: 20 kg
Bystronic Bystar 4020 Year of construction : 2008 4.4 KW in 2018 completely overhauled by Bystronic At that time, a glass overhaul was carried out and the turbine was replaced by a magnetically bearing turbine. Electrified.
CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of Make: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with power source Hypertherm XPR300 incl. Optimix gas console 1 x drilling spindle 26 kw to 40 mm diameter, incl. 8-fold tool changer 1 x preparation for retrofitting a rotator (for bevel cuts) 1 x nesting program on the CNC control Availability: May 2026
Max. profile width at 180°: 220 mm Max. profile height: 210 mm Angle adjustment range: 30°-180° Welding level: 340 x 300 mm
table length: unterschiedlich mmtable width: unterschiedlich mmtable height (lateral area): unterschiedlich mmweight: ca. 240 kgDescription :- Special set for SIEGMUND 28 clamping tables- original SIEGMUND accessories () included :- 1x 28 mm mobile tool trolley- 30x quick release bolts with short twist lock- 8x universal stop 150 L - nitrided- 4x universal stop 225 L - nitrided- 8x stop and clamping angles 175 L - cast- 2x stop and clamping angle 500 G left - nitrided- 1x stop and clamping angle 750 G left - nitrided- 1x stop and clamping angle 750 G right - nitrided- 1x stop and clamping angle 500 G left - nitrided- 1x stop and clamping angle 500 G right - nitrided- 4x stop and clamping angles 300 G left - nitrided- 8x prism Ø60-135° burnished- 16x Professional screw clamp - Nitrided- 6x Professional screw clamp 45°/90° - Nitrided- 4x universal stop 300 - nitrided- 1x accessory set ...
A complete Severt robotic welding system is available. Travel path X: 8000mm, robot axes: 6, stations: 2, axis positioners: 2, positioner speed: 6rpm, positioner load capacity: 1000kg, faceplate torque: 1000Nm, power source: OTC DP 500, power output: 350A. Including seam tracking sensor, push-pull torch, hose packages, wire guide spirals, contact tips, gas nozzles and additional items. Documentation vorhanden. On-site inspection is possible.
A CNC laser cutting system Trumpf including RotoLas and Liftmaster is available. Laser source: TruFlow 5000, laser type: CO2 laser, laser power: 5000W, travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness structural steel/stainless steel/aluminium: 25mm/25mm/15mm, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm, max. axis speed: 200m/min, max. simultaneous speed: 300m/min. Machine dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12000kg, operating hours: 55462h, laser hours: 24430h, beam hours: 12742h. Hours status as of 01/2026. Documentation available. On-site inspection is possible. Expected to be available from January 2027.
Offer 25396 Technical data: - Load capacity 250 kg - Face plate diameter 600 mm - Table height in horizontal position 910 mm - Face plate can be infinitely swivelled by hand crank - Face plate speed electr. infinitely variable 0.2 - 2 rpm - Welding current transmission 300 A - Drive 220 V - Right + Left - Run - E. footswitch - Space requirement approx. W 800 x H 910 x D 1200 mm - Weight approx. 150 kg
KUKA KR 8 R2100-2 arc HW robotic welding station was built in 2021 in Germany by KUKA Deutschland GmbH. The system is designed for precision welding of workpieces with even the most complex geometry. All the necessary components are integrated inside the modular design, enabling the workstation to be adapted accordingly to current production needs. The workpiece welding process is performed by a KUKA 6-axis robot from the KR CYBERTECH ARC series. The machine is distinguished by its compact design, which provides a high degree of movement freedom even in hard-to-reach places. To avoid any collision of cables with other station components, they were routed inside the robot arm. All this is complemented by an easy-to-use controller with a range of additional functions. During automated welding, dynamic and accurate feeding of the welding wire is very important. To achieve this, a reli ...
Extraction and filtration of aerosols Manufacturer: United Air Specialists Type: Mena 2000 Com. 13051 P: 1.5 kW Vmax: nom. 1700m³/h pg: 1500 Pa U: 400 V F: 50 Hz I: 3.3 A tmax: 65 C More items - new and used - can be found in our shop! International shipping costs on request!
BIHLER DC welding system consisting of: 1 BIHLER B 10 welding control 3 welding transformers each 70 kVA 1 cooling unit Welding power: 3 x 70 kVA Connection voltage: 400 V, 50 Hz.
BIHLER resistance welding system consisting of: 1 BIHLER B 1000 welding control 2 welding transformers 2 x 64 kVA Welding power: 2 x 64 kVA Connection voltage: 400 V 50 Hz
