saws wood used for sale (1,053)

Dimensions (L/W/H): 800x500x2000 mmWeight: 180 kgTotal power requirement: 2,57 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2860x1140x1100 mmWeight: 1070 kgTotal power requirement: 19 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3600x800x1900 mmWeight: 2400 kgTotal power requirement: 16 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 840x540x1980 mmWeight: 158 kgTotal power requirement: 2,1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1860x2700x1450 mmWeight: 350 kgTotal power requirement: 5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3500x1950x1500 mmWeight: 2500 kgTotal power requirement: 58,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 1500 kgTotal power requirement: 10,2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6700x3350x1500 mmWeight: 1000 kgTotal power requirement: 7 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x2900x850 mmWeight: 650 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x2800x1100 mmWeight: 310 kgTotal power requirement: 3,8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3225x1750x1200 mmWeight: 1200 kgTotal power requirement: 16,75 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x750x2250 mmWeight: 450 kgTotal power requirement: 4 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1000x1200x1530 mmWeight: 400 kgTotal power requirement: 9 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2950x1620x1770 mmWeight: 3300 kgTotal power requirement: 71,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2600x2800x1100 mmWeight: 330 kgTotal power requirement: 3,8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3550x1450x1800 mmWeight: 3500 kgTotal power requirement: 94,75 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3000x2900x850 mmWeight: 1280 kgTotal power requirement: 5,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2500x730x1280 mmWeight: 550 kgTotal power requirement: 5,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

H&M automatic cross cut line, type HM-Z-4, Manufacture year 2008, For straight & (double) angle cutting and equipped with milling unit, Consisting of:, - Cross chain infeed system, - Automatic push infeed, working length 6 meter, - Industrial cnc controller, - Milling unit cnc controlled, - H&M cnc cross cutting machine, type HM-Z-4, Cross cut machine with 5,5 kW motor and saw blade Ø 700 mm., Angle adjustment 0 – 180 ° and incline adjustment 0 – 45 °, Z-axis adjustment 200 mm, max. cutting height 250 mm, - Outfeed system with outfeed station

Key data: 6500 mm, 100 mm

Horizontal panel sizing saw Longitudinal saw with 6,500mm cutting length Panel dimension 6,300mm Main saw motor 35KKW frequency-controlled Feed speed saw carriage 5-80m/min. Max. saw blade diameter 550mm with 130mm protrusion Saw blade deviation sensor Cut-gap closers Pressure device 2,600 - 100mm Material tray 6,300mm Extension to 10,900mm 9 Parcel jammers 4 Cross aligners Pressing device 100- 2,600mm, approx. 2,000mm behind the cutting line Pressing device 100- 2,600mm, approx. 4,000mm behind the cutting line Electronic Control PC6200 Machine Tables Air Cushions with Steel Nozzles 1 angle table 2,600x1,000mm with angle stop rail 4 side table 2.600x800mm More information on request!

I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.

SCHULTE horizontal log bandsaw line, type HB 12, - Max. log diamter 1250 mm, - Cutting length up to 8 m, - New motor 37 kW - frequency drive, - Log carriage with manual clamping

Graule ZS 135 Pull Saw - Technically outdated - 400V version - With brake motor - With saw blade protection - new support plate, original Graule - without base frame

Length: 5.25 m, 2 cm height, 3 teeth per 1 inch, Ready to saw: toothed, set, ground - ready for use, endlessly welded

minimax si x 32A3 UPx Sliding table saw Trimming length 1200mm Sliding carriage 3200 x 360 mm Format cuts 3200 mm Cutting width with rip fence 1270 mm Max. cutting height +90°: 136 mm Max. cutting height +46°/-46°: 97/60 mm Motor 400V 50Hz 7kW Speed main saw blade: 4000 rpm Suction Nozzle Diameter: 120mm & 80mm Weight: 936kg G&STÜ-5508783

Sawblade tiltable: 0 - 45 °Length of the rolling table: 3.200/3350 mmcutting width: 1.100 mmMotor output: 5,5 kWCutting height: 155 mmCutting height at 45°: 110 mmSaw blade diameter: 450 mmSpeed: 3.000/3.600/4.200 U/min.Dust suction hood: 1x120 , 1x80 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HOLZMA HCV 11 Angle Center Double Angle Panel Saw Cutting length 4.300 mm Bevel cutting length 2,200 mm Lift width 2,200 mm Number of Grub Teeth 13 Feed rate max 125 m/min Stepless feed Saw Table Top Allowance 125 mm Saw top diameter max 450 mm Main motor 18 kW Undercutter Yes Postforming scoring machine Loading with vakkum jack Feed table rear Yes Turntable in machine table For delicate items Yes Left Stop Page HOLZMA Central pressure device for angle setting Waste flap HOLZMA Electromagnetic Measurement System HOLZMA Power-Lock HOLZMA Soft-/ Postforming VVSH HOLZMA Integrated Face Cutting HOLZMA Two-finger clamp HOLZMA CADMATIC control Other offers - click - Gabiani Biesse Giben Panhans Schelling Meyer Holz-Her Scm Holzma Rema Scheer panel saw loading panel cutting table saw sheet package sheet machining center plate machining center nesting automatic efficie ...

formatkreissägen mit schwenkbarem sägeblatt SICAR 350 Neue Maschine Bereit zur Auslieferung SUPER RABATTPREISE mit Vorritzaggregat : Ja digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz CE-Vorschriften: JA mit Bedienungsanleitung und CE-Erklärung Volt. 380/50 Auf-/Ab- und 45°-Neigung der Sägeblätter manuell digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz schlitten mm. 3200 unabhängige Motoren hauptmotorleistung PS 7.5 motorleistung Vorritzaggregat PS 1 max. Sägeblattdurchmesser mm. 350 durchmesser Vorritzaggregat mm.120 Max. Schnitthöhe bei 45° mm. 92 Max. Schnitthöhe bei 90° mm. 120 Max. Schnittbreite an Parallelführung mm.1250 volt. 380/50

Band saw CENTAURO SP600 AVAILABLE FROM JANUARY 2026