subcategories
(3rd category level)
Manufacturer:
(Category: 836)
Platform width: 900 mm Platform depth: 625 mm Load capacity: 500 kg Max. sheet size: 600 × 750 mm Max. stack height: 1200 mm Min. stack height: 540 mm - with airing
Width 76 cm Year of construction 2009 Mobile stacking delivery for marking-free laying Banding display with max. 3 panels Vibrating device Pressing station max. infeed width 760 mm - 1 panel max. infeed width 235 mm - 3 panels Small format device for stacking height 3 - 20 mm Output up to 600 stacks / h Steel / HD - Interface / Interface Price on request. Worldwide delivery & installation.
M. No.: 46131 Equipment / Additional information: Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000
Norfoil 2000 reel to reel hot stamping press Web width 160 mm Unwind Web guide Cutting Lamination Hot foil Rewind Waste rewind Razor blade slitter
Max. size= 46 x 27 cm, Availability= 012026, Number of drill spindles: 4 Max. stack height (mm): 60 Feeder table width (mm): 460 Feeder table depth (mm): 270 Drill diameter (mm): 2 – 35 Drill spindle spacing (mm): 19 – 425 Drill speed: 2-stage Time per work cycle (sec): 3.3 Automatic hub Power supply: 400 V 50 Hz three-phase current Output (kW): 1.8 H x W x D, net (cm): 139 x 71 x 77 Weight, net (kg): 265LOT Loaded in truck or container
Size: 0x0Equipments:Toggle press for beech corners, 40 mm stroke, 73 mm throat depth
Size: 100x140 cmEquipments:Max. Load capacity: 1000 kg
Designed for closing Wire-O® bindings up to 430 mm in width. This unit is not equipped with a hanger feeder and is therefore not suitable for calendar production with hangers. However, this machine is perfectly suited for the production of books and other Wire-O® bound documents. Includes a complete set of closing tools for all common Wire-O® sizes (2:1 and 3:1). Technical specifications: Max. binding width: 430 mm Supported Wire-O® sizes: 1/4” to 1” (2:1 and 3:1 pitch) Output: up to 1,000 books/hour Operation: semi-automatic No calendar hanger feeder included Includes full set of closing tools Power: 230 V / 50 Hz / 3 A
Cyklop DTM 22 electric tape dispencer - on a trolley - two tape length can be pre-set - cuts and wets the tape automatically - Including +/- 50 reels of 70mm wide tape
2 x Audion Elektro Sealboy working width 26 cm one of them has a knife to cut the foil for working with tube foil from the roll 1 x tube foil 250 mm width
Haug AG35 generator charging unit for making products static or antistatic See soecificationa in the pictures
Nipper - Double action hydraulic nipping press workingwidth: 420 mm up to 6.000 kg pressure refurbished and we will install a new pump after order
Morgana Autocreaser 33 year: paperweights: 70-400 grams Vacuum autofeed with alignment 16 creases per sheet 9 programs max size: 730 x 330 mm min size: 160x140 mm
Semi-automatic setting Commander with touchscreen Book measuring table Stand-alone pre-heating device : IR Infeed conveyor Star feeder Rounding and backing station Glue unit (Excluding gauzing station) Book mark suction device Head and tail banding station Casing-in station Case pre-stacking conveyor Case bending station Müller Martini VBF EP 680L : Semi-automatic setting, Pressing station, Left hand infeed Book Stacker, Müller Martini BLSD 650 D
Back finishing with NAGEL SP PLUS SQUARE PRESS. Flat, rectangular pressing of the booklet spine by means of a special pressing system Max. number of sheets of the brochure up to 30 sheets (80 g/m² paper) Max. power (set/hour) for single pass 1600 hours Double pass 1400 hours Booklet sizes min.(mm) 70 x 105 Booklet sizes max.(mm) 350 x 250 Power supply (V) 230 Volt Net weight (kg) 100 Gross weight (kg) 120
- 4 head drilling machine - with the existing accessories
A nice condition Akebono paper strapping machine with floor trigger. Including 5 rolls of repro paper rolls.
Wire stapling machine with 2 stapling heads for 0-25mm stapling
Size: Equipments:Allows you to cover covers of max. A3 + format. The machine is equipped with work table illumination, cutter guillotine, edge folding module, vacum tableMax. Area (W x D) 750 × 476 mm.Max. bending length 750 mm.Max. dimensions of finished cover (closed) 352 × 455 (back) x20 mm.Thickness of cardboard cover 8 mmVoltage 220-240 V.Dimensions of the machine (W x D x H) 1000 x 780 × 210 mmWeight 43 kg
Block size press Müro 5000/A4 WT; good condition; cleaned and tested; Heat baffle; Stack increase; with dryer. Block gluing machine Müro 5000/A4 WT; good condition; cleaned and checked; pile elevation; heating sheet; with heater.
Counting forklifts / compensating stackers Max. format: 500 x 340 mm, number of pages tabloid 96, broadsheet 48 Min. format: 148 x 105 mm, number of pages tabloid 4, broadsheet 4 Can handle single specimens (distance min. 10 mm) or scale current (distance min. 40 mm). Lateral offset max. 5 mm. Specimen thickness max. 6 mm / Flow height max. 10 mm Layer height max. 170 mm / Package height max. 350 mm Height inbound min. 500 / Height of infeed conveyor max. 1250 mm
max. format 36 x 36 cm Year of construction 2010 Banding device Computer control with monitor US 2000 Corner Slider CL Banding Station for paper and foil tapes max. stacking height 30 cm Mobile substructure Delivery date: immediately Price on request. We supply and install worldwide.
number of heads: 4 serial no.: 92.847 bore diameter: 3-8 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
