post press: other used for sale (818)

Size: 0x0Equipments:drilling heads:1With accessories

Case Maker Co-pilot system with touch screen for automatic size setting, menu guided make-ready and fault indication. Twin board pre-loading conveyors Twin board magazine feeders Central soft spine feeder with double reel holder for auto-splice and cutter for waste Magazine feeder of pre-cut cloth with miss control Mobile hot-melt gluing unit Heated glue application roller with scraper roller Cloth cylinder with grippers & exchangeable plates for rubber pad Counter shingle delivery with roller conveyor External glue application adjustment Glue viscosity device for automatic water supply control Pressing roller for crease-free cover to board application Single case request for operator set-up Variable DC drive Automatic lubrication Including accessories & manuals.

Ribbon insterting machine For automatic inserting of one or two ribbons into cutted, straight, rounded and pressed book blocks. Can be used in connection with a casing-in line. Description : Infeed conveyor Bookmark insert Scissor Delivery Formats 350x240x70 mm - 100x65x3 mm or 100x100x3 mm Ribbon width : 3-8 or 6-13 mm Capacity for 1-2 ribbons : 60 cycles/min (depending on the format)

Size: 1650 mmEquipments:Automatic feeder unitExtended folding and transfer sectionPress/delivery sectionConveyor-type deliveryLinear rail-based manual adjustment elementsTop control panel / operator panelSafety equipment (protective guards, emergency stop, etc.)Gluing line (glue application infrastructure available)5 glue gun nozzles for 3/4-point gluing, or alternatively for longitudinal seamgluingCold glue (PVA)Valkomelton gluing systemGlue Station / 4-Point – 4 GP, 1999Breaker: Jagenberg, 1999, Separator / BreakerMosca RO MP2, 2000, Bundler

Size: 2000 x 950 mmEquipments:Electric Modular DryerForced Hot Air Systemdimension 3800 x 1250 x 2170 mmPOWER 15 kW 27 Aweight 650 KG

Size: 300 x 450 mmEquipments:max. screen frame size 500 x 750 mmtable height 945 + 30 mmscreen lift height 300 mmmax. printing speed 100 - 500 mm/sec.max. cycling speed 800 p/hmains supply 220, 50/60 V / Hzworking pressure 5 - 7 bardimensions (LxWxH) 920 x 750 x 1710 mmweight approx. 245 kg

Size: 530 mmEquipments:Coate with IR and UV dryers21 Inch max. width sheeroller flood coater with aniloxspare applicating rollers included

HORIZON GMS 7 -Automatic book spine taping machine Year 1996 -Length of Spine: Manual Feed (80 mm -3.1″ to No Max. Limit) or Automatic Feed (180 mm- 7.1″ to 320 mm -12.5″) -Book Width: Manual Feed (60 mm- 2.4″ to No Max. Limit) or Automatic Feed (128 mm- 5″ to 273 mm- 10.7″) -Taping Thickness: Manual Feed (2 mm- 0.1″ to 30 mm -1.2″) or Automatic Feed (5 mm- 0.2″ to 15 mm- 0.6″) -Taping Speed: 4,000 books/hr. (180 mm/7.1″ long) -Tape Type: Water-moistened adhesive tape -Voltage/Frequency: 100V 50/60Hz, 115-120V 60Hz, 230V 50Hz -Dimensions (W x D x H): 72.1″ x 21.7″ x 36.7″ -Machine Weight: 140 kg (242 lb) -Available immediately in our stock

S. No.: 3011747 Equipment / Additional information: Volt: 230 // Hz: 50 WITH PEDAL Condition: doesn’t work properly, needs service

M. No.: 3704 Equipment / Additional information: Volt: 220 // Hz: 50 WITH PEDAL

Size: 500 x 350 mmImpression: 11165626 Mio.Equipments:Accumulate & Folder ACF-30Stacker ST-401x VAC-600 Ha 3x VAC-600 HmThree knife trimmer HTS-30SSaddle stitcher SPF-30S 24 stationsU-shaped layout: Efficient space utilization and easy monitoringInline production from collating to finished productVariable data processing: Handles personalized prints and variable page counts, ideal for digital printingFully automatic format adjustment for quick job changesTouchscreen for user-friendly operation, even for less experienced operatorsSheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mmPaper weight: 40-350 gsmProcessing thickness: 8-200 pages (max. 5 mm spine thickness)Production speed: Up to 5,500 booklets/hourStitch distance: 60-150 mmTrimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mmTrimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mmPower supply: 400V / 50HzSpace requirement: Min.  ...

NM 414 Grooving Machine Heavy-duty grooving machine for manual operation, designed for grooving cardboard from 0.6 to 4 mm using the compression-bending principle. Coupling-free drive controlled by a frequency converter Built-in piece counter Thanks to an innovative drive concept, grooving is performed in a single stroke Working width: 440 mm Groove width adjustable from 4–12 mm Front work table 45 cm long with 2 scaled T-slots and 2 guide rails Rear work table with belt discharge Grooving on the top or bottom side depending on the tool’s mounting position Power rating: 1 kW, 3-phase 400 V Standard configuration: Grooving tool with movable bending jaws and height-adjustable grooving blade. Very good, like-new condition

Size: 166 x 211 mmEquipments:Full Automatic line of High Die Cutter for Cards (Business, Phone, Loyalty, Membership), Labels, ticketsST-18.02 Strip stock feederSE-18.2 Infeed and Cross Cutter with Automatic ProgramD-18 Die Cutting Punch Unit with 2 chasesPB-18.1 Banding machine with deliveryStrip length min./max. : 350/1130 mmStrip width min./max. : 45/180 mmPrecut label size min. : 25x45 mmPrecut label size max. : 150x180 mmDie cut size min. : 20x41 mmDie cut size max. : 145x175 mmStack heigh min./max. : 45x125 mmMin. trim per side for die cut : 2 mmIntermediate trim cut : 3 mm / 22 mmHeight of cutting die : 60 - 100 mmMecanical Speed : 10 - 15 strokes per minuteDie Cut Pressure : 4 - 5 TonsBanding machine, width : 25 mmMachine is controled with program and screenElecrical datas : 380V, 50 Hz, 6.8 KW, 16 Amp.Air supply required : 6 bars dry air (30 - 45 m3/h) incl. 30% reserveDimensions ...

Size: 320 × 550 mmEquipments:Sheet feeder:Two drum feeders with gripper systemBelt conveyor channel for product conveyingSurface with rice paper structure to protect the productFront stop made of aluminumSide guides with sorting screws for sheet positioningScrew ejector for precise bow positioningSheet control system:Double sheet inspection using mechanical thickness measurementMisaligned bow detection using photocellPhotocell-controlled activation of the second feeder and glue injection timingGlue unit:Hot melt or cold glue application (configurable)Glue injector with digital keyboard settingDelivery:Double roller press station for optimal adhesionInclined conveyor belt for shingled product stacking at the exitControl system:SPS control unitTouchscreen control panelSafety system with light barriersTechnical data:Min. Format 100 × 150 mmMax. Format 320 × 550 mmMax. sheet thickness 5 m ...

Size: 0x0

Size: 0x0

Size: 1360 x 1200 mmEquipments:Fully automated palletizing of loose stacks and solid containers at a speed of up to 1,800 stacks/hrAutomatic Palletizingproduct infeed via accumulating conveyorPallet dimensions: 1360 x 1200 - 1000 x 800travel stop for dropping of very smooth productspallet removal in moving directionPallet sizes 1,360 x 1,200 or 1,000 x 800mmSpeed 30 Stacks/min

Melton hotmelt adhesive appllicating system.

Inserting Machine Neopost (Quadient) DS200 Configuration: Inserting System DS-200 Tower Feeder 2 with reading Inserts Hatchet feeding with reading Storage Tape Fsbrqbgjyttidsv Iofw Machine permanently in maintenance contract until 31.1.2026 ! Last machine maintenance in 12/2025 ! Little walked.

Eyelet machine Piccolo for sale Sell a Piccolo eyelet machine in good, working condition. Ideal for inserting eyelets in paper, cardboard, leather or plastic. Easy hand operation and stable design. Inspection and test possible.

HS Heiber + Schroeder WP 11 D - window patching year 1991 in production good condition

Condition: Very good condition

Edge banding machine Sumbel Perkeo 90; cleaned and tested; Working width 90mm; 1 roller; suitable for cold glue. Edge gluing machine Sumbel Perkeo 90; cleaned and checked; working width 90mm; one roller; used for cold glue.

Block size press Müro A3 2000/TM; cleaned and tested; Tabletop device; 2 dryers; insertion width 525mm; Insertion height 200mm. Pading press Müro A3 2000/TM; cleaned and checked; two heaters; working width 525mm; working hight 200mm.

Bielomatic Collator Year : 1991 5 stations, dual-purpose Gluing Unit HHS crimping and Multiflex on both sides Numbering: yes

2x Hohner stitching heads for omega loop. In excellent condition. For Duplo and Horizon booklet makers, etc.