76 BOBST used machine for sale

Reference ID: PP-62429 Manufacturer: Bobst Model: SP 142 CE Year: 1995 Max. Size: 1420 x 1020 mm Condition: Good Location: Europe Availability: Immediately Manufacturer: BOBST Model: SP 142-CER Year of manufacture: 1995 Maximum sheet size: 1,420 × 1,020 mm Minimum sheet size: 700 × 500 mm Maximum rated speed: 8,000 sheets/hour Maximum cutting force: 5.5 MN (550 t) Recorded operating hours: 51,652 h Condition: Good and fully operational Inspection: Available with the machine running, by appointment   Equipment and configuration Automatic sheet-fed flatbed die-cutting system Die-cutting and creasing section Stripping section for removal of cutting waste Blanking section for separation of individual blanks Side-access tooling arrangement Pull-out tool/frame carrier Operator platforms with access stairs and guardrails Emergency-stop buttons at the machin ...

Working width max. 800 mm, min. 76 mm, Equipment: Longitudinal seam, folding bottom, double edge, 4-point, feeder with vibrator and cleaning nozzles, Accufeed, cutting alignment according to the feeder right and left, primary crusher right and left with lower central transport, electronic top gluer HHS with 2 application heads, small box device, disc undergluing unit left, semi-automatic digital positioning system for format setting with memory locations (CS), digital position indicators, remote control, electronic control Bobst C.U.B.E, A2 folding floor module, video surveillance of the transfer station, upper and lower Central transport in folding, kicker, counter, box alignment on the press belt, pneumatic, long press belt. Overhaul 2026: cleaned, checked, painted, new feeder and transport belts.

Reference ID PP-62514 Category Flatbed Die Cutter Manufacturer Bobst Model SP 102-BMA Year Built 1987 Color - Impression - Working Hours - Speed - - Max. size 720 × 1,020 mm Min. size 350 × 400 mm Condition Good Location Europe Availability Immediately Machine Description Machine type: Automatic hot-foil stamping, embossing and carton converting Press Maximum sheet size: 1,020 × 720 mm Minimum sheet size: 400 × 350 mm Maximum hot-foil stamping / embossing area: 1,010 × 680 mm Maximum cutting die full size: 1,040 × 725 mm Maximum die-cutting size with gripper margin: 1,020 × 705 mm Maximum die-cutting size without gripper margin: 1,020 × 720 mm

Reference ID PP-62454 Category Folder Gluer Manufacturer Bobst Model MISTRAL 110 A2 Year Built 2006 Color - Impression - Working Hours - Speed - - Max. size 1,100 mm Min. Size - Condition Good Location Europe Availability Immediately Machine Description The BOBST Mistral 110 A2 is a high-performance folder gluer designed for various folding carton and corrugated board applications. 6 gluing points HSS glue control system 4 cold glue nozzles Lower left gluing system with glue disc and double scraper Removable glue tank Automatic glue level control system Kurandt lower glue trace detector Kurandt Compact Series code reader BOBST rotary ejector with box advancement device Left alignment conveyor Main gauge with lateral and longitudinal adjustment Gauge blade with blower Electric pile vibrator Lower central conveyor Upper central conveyor Central low ...

BOBST SP 102 E - Car plates year 1984 82,500 running hours max. size 740 x 1,040 mm min. size 350 x 400 mm max. speed 8000 sheets / hour max. cutting force 250 T manual non–stop feeder 1 pull side lay guide o.s. 1 cutting chase with quick lock 1 cutting chase without quick lock 1 cutting plate 4 mm and 1 cutting plate 5 mm Centerline Micrometric device (1mm plates) stripping section 1 set stripping frames (quick lock) with tools in production good condition (upgraded)

BOBST 102 E II year 2000 max. size 72 x 102 cm min. size 35 x 40 cm max. speed 7,500 sheets/hour max. pressure 250 tons thickness 80 to 2.000 g/m2 feed table die-cutting section stripping section delivery with non-stop rack Centerline system BOBST electronic system Standard Equipment Die-Cutting Upper Chase lower cutting plate (4 mm) lower support plate with adjustable centering upper stripping frame with tooling quick locking device lower stripping frame with tooling standard-height platform without pile changer upper chase, screw-fixed removable upper chase compensation plate 3 mm adjustable centering lower stripping equipment front waste removal device in production good condition

Bobst Flexo 200 – 6-colour flexo printing machine Year: 1995 Colour configuration: 5+1 Max. feeder size: 900 × 2,200 mm Max. print area: 900 × 2,100 mm; min.: 300 × 700 mm Anilox rollers: outside diameter 679 mm, length 2,100 mm Printing-cylinder circumference: 1,542 mm Reference: PP-42700 Further information on request.

Bobst Flexo 200 – 5-colour flexo printing machine Year: 1988 Printing units: 5 Max. sheet size: 1,270 × 2,030 mm; Min.: 550 × 650 mm Anilox rollers: units 1–4 with 160 lines/cm; unit 5 with 100 lines/cm Equipment: Vacuum feeder with pneumatic pressure plate Ceramic anilox rollers with metal doctor blades Vacuum sheet transport upgraded in 2007 Sheet cleaning and DUO-TECHNIK hot-air drying Reference: PP-52915 Further information on request.

Bobst Domino 90 Matic – Folder gluer Year: 1987 Max. format: 800 × 900 mm Material weight: up to 600 g/m² Equipment: Straight-line and crash-lock bottom Left-hand lower disc gluing unit Renewed HHS cold-glue system with applicator heads Bobst Easyfeeder 90 Belts replaced in 2025 Reference: PP-53236 Further information on request.

Bobst Flexo 1600 / SPO 1600 – Flexo printing and die-cutting package Year: 1985 Printing units: 2 Package comprising Bobst Flexo 1600 and Bobst SPO 1600. Condition: Both machines have already been dismantled. Reference: PP-57058 Further information on request.

Bobst SPO 160S / Flexo 160 – Flexo printing and die-cutting line Year: 1997 Printing units: 3; bottom printing Max. sheet size: 1,600 × 1,100 mm; Min.: 600 × 520 mm Speed: up to 5,500 sheets/h Equipment: Prefeeder, Flexo 160, SPO 160S and breaker/separator Vacuum sheet transport Ceramic anilox rollers in all printing units Rubber-roll inking in units 1 and 2; unit 3 additionally with doctor blade No dryers or dust extraction fitted. Reference: PP-58379 Further information on request.

Bobst Domino 165 A3 MOT – Folder gluer Year: 1992 Working width: 290–1,650 mm Straight-line, 3-point gluing and crash-lock bottom applications Equipment: HHS XT-E8 upper gluing system, 8 channels, 4 PL-500 heads Vacuum feeder, pre-breakers and motorised format adjustment Bump-and-turn station for 90° rotation HHS hotmelt station 2 Enpro units for tear-strip and self-adhesive application Additional crash-lock bottom module and alignment units Pneumatic timed compression belt Condition: The 4-point module is not operational. A quotation for conversion or repair of this module is available. Reference: PP-58602 Further information on request.

Bobst SP 142 CER MATIC – Flatbed die cutter with blanking Year: 1990 Max. sheet size: 1,020 × 1,420 mm; Min.: 700 × 500 mm Equipment: Automatic sheet feeder and lateral BOBST Centerline system Die-cutting, creasing, stripping and automatic blanking Automatic non-stop delivery and waste extraction Operator platforms and quick cutting-frame change BOBST factory retrofit with upgraded controls and safety equipment Reference: PP-60850 Further information on request.

Bobst SP 142-CER – Flatbed die cutter with blanking Year: 1990 Max. sheet size: 1,020 × 1,420 mm; Min.: 700 × 500 mm Speed: up to 8,000 sheets/h Max. cutting force: 550 t Recorded operating hours: 21,834 h Equipment: Automatic sheet feeder Die-cutting and creasing station Stripping station Automatic blanking Reference: PP-60899 Further information on request.

Reference ID PP-61911 Category Flatbed Die Cutter Manufacturer Bobst Model SP 102 E II Year Built 2000 Color - Impression - Working Hours 63000 Speed - - Max. size 720x120 mm Min. size 350x400 mm Condition Good Location Europe Availability Immediately Machine Description Feed Table, Die-Cutting Section, Stripping Section, Delivery with Non-Stop Rack, Centerline System, BOBST Electronic System, Standard Equipment Die-Cutting: Upper Chase E-001; Lower Cutting Plate E-004 (4 mm); Lower Support Plate with adjustable centering. Stripping: Upper Stripping Frame F-002 with tooling F-021/F-022; Quick Locking Device F-076; Lower Stripping Frame F-008 with tooling F-081. B-007 Standard-height platform without pile changer (1) E-001 Upper chase, screw-fixed (4) E-002 Removable upper chase (1) E-005 Compensation plate 3 mm (1) E-055 Adjustable centerin ...

Reference ID: PP-60403 Category: Flexo Printer Manufacturer: Bobst Model: 20SIX Year: 2014 Color: 8 Speed: 400 m/min Max. Size: 1300 mm Condition: Very Good Location: Europe Availability: Immediately Description Machine Type: Central Impression (CI) Flexographic Printing Press Gearless Drive: Yes Number of Printing Colors: 8 Ink Type: Solvent-Based Machine Status: In Production Available From: August 2026 Latest Removal Date: December 2026 Technical Specifications Maximum Web Width: 1,300 mm Maximum Printing Width: 1,250 mm Printing Repeat Range: 320 – 800 mm Maximum Mechanical Speed: 400 m/min Suitable Materials The machine is suitable for printing on: PE, OPP, CPP, PA, PET and Paper Material Thickness Range: Minimum: 12 micron Maximum: 200 micron Unwinder Automatic Turret Unwind Shafted & Shaftless Operation Maximum Reel Diameter: 1 ...

Reference ID: PP-60788 Category: Flatbed Die Cutter Manufacturer: Bobst Model: SP 142 CER II Year: 2000 Working Hours: 22900 Speed: 8500 sheets/h Max. Size: 1420 x1020 mm Min. size: 700 x 500 mm Condition: Good Location: Europe Availability: Immediately Description: Max. cutting pressure: 550 tons Suitable for paper, solid board and corrugated board Special corrugated board device Pallet feeder with automatic non-stop system by grill Operator side lay with electronically controlled movable stop Opposite side pushing lay BOBST Centerline system Micrometric adjustment system Chase loader 2 cutting chases Bernoulli device Stripping station Quick-lock stripping system Blanking station Quick-lock blanking system Non-stop delivery Automatic pallet changing system Pre-makeready table

Bobst Easyfeeder GT, BJ. 2006 Pre-inserts for folding carton gluers, Format area: max. 1100 x 600 mm, min: 100 x 90 mm, Standard, pneumatic cut, supports, max. 800g/m² & E-flute, pneumatic alignment shield for feeders, cleaned, tested.

Maximum sheet format: 1420 x 1020 mm Minimum sheet format: 700 x 500 mm Maximum cutting force: 600 t Gripper margin: 18 – 22 mm Maximum output: 6000 sheets/hour Processable materials: Cardboard 100 – 1000 g/m² Corrugated board: F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with stripping station, inter-sheet inserter, and pre-stacking device, operator platform - 1 x Preparation table for external tool setup - 6 x Frames for stripping forms - 6 x Chase frames for cutting dies - 6 x Setup trolleys

Format range: max. 1100 mm, min. 126 mm. Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, cutting alignment module according to the feeder, electronic ERO top gluer with 4 application heads, Disc subglue unit on the left, electronic overhaul folding with servos, vibrator with tooth gauge on the feeder, additional central transport in the primary crusher, primary crusher right and left, kicker, counter, additional central transport in folding, long, pneumatic, intermittent press belt, cleaned, tested, new feeder and transport belts. Machine can be viewed by appointment while running.

• Reference ID: PP-59393 • Category: Flexo Printer • Manufacturer: Bobst • Model: SPO 1600 / Flexo 160 • Year Built: 1988 • Colors: 2 • Speed: 6,000 sheets/hour • Max. size: 1,600 x 1,100 mm • Min. size: 600 x 520 mm • Condition: Good • Location: Europe • Availability: Immediately Machine Description: • SERCO Feedmaster Prefeeder • BOBST Flexo 160 – 2 Colour Printing Units • Conveyor • BOBST Autoboard SPO 1600 Die Cutter Technical Specifications: • Maximum Sheet Size: 1,600 x 1,100 mm • Minimum Sheet Size: 600 x 520 mm • Maximum Cutting Force: 400 Tons / 4 MN • Maximum Speed: Up to 6,000 Sheets/Hour • Suitable for Corrugated Board Production • Heavy-Duty Swiss Construction • The equipment is currently installed and in production, allowing inspection under power and production testing.

Format range: max. 750 mm, min. 66 mm. Equipment: Longitudinal seam, folding bottom, double edge, dental gauge, vacuum and vibrator at the feeder, cutting alignment module with alignment right / left, primary crusher right and left with central transport top / bottom, disc subgluer left, digital position indicators, electronic top gluer HHS 8-channel with 4 application heads, Quality assurance system HHS with disc glue monitoring and 2x nozzle glue monitoring, pinball, camera monitoring of the tray, Central transport top/bottom in folding, press roll device, radio remote control, pump-up glue unit, long press belt. Overhaul 2026: cleaned, checked, painted, new feeder and transport belts. Machine can be viewed by appointment while running.

Format range: Boxes, folded flat: max. 400 mm, min. 50 mm Length of the boxes: max. 500 mm, min. 100 mm Equipment: Standard, left-hand delivery, own drive in the rotary module, vibrator, own drive in the delivery, infinitely adjustable via potentiometer, standalone solution via speedometer, processable materials: solid board, E-flute, carton types: Ordinary folding boxes 4+6 dot boxes, with or without lids. Overhaul 2026: cleaned, checked, painted, new belts and belts. Machine can be viewed by appointment while running.

Format range: max. 800 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, feeder with vibrator and tooth gauge, Accufeed, cutting alignment according to the feeder right and left, Pre-crusher right and left with lower central transport, electronic HHS upper gluer with 2 application heads, HHS quality assurance system with code reader, glue seam control and flipper ejector, disc bottom glue unit left, Digital positioning system for format setting with memory spaces (CS), digital position indicators, radio remote control, electronic control Bobst C.U.B.E, A2 folding floor module, video surveillance of the transfer station, upper and lower central transport in folding, kicker, counter, pneumatic, long press belt. Overhaul 2026: cleaned, checked, painted, new feeder and transport belts. Machine can be viewed by appointment while running.

Reference ID: PP-58435 Category: Folder Gluer Manufacturer: Bobst Model: DOMINO 145 MATIC A4 Year Built: 1993 Impression: - Working Hours: - Condition: Good Location: Europe Availability: Immediately Machine Description: Machine Options: • Straight-line gluing • Straight-line upper gluing • Straight-line gluing + EUR lock • Crash lock / crash lock with partition • Special – conical construction Workable Materials: • Solid board • Flute N • Flute F • Flute E • Flute B Machine Equipment: • HHS Xtend2 gluing system • LNT 300 gluing check, 1x under wheel • PL500 gluing nozzles, 4 pieces • Prefolding tool for gluing flap • Under gluing wheels width: 5 mm and 10 mm

Format range: max. 1000 mm, min. 56 mm Equipment: Longitudinal seam, folding floor, double edge, 4-point gluing, motorised format adjustment, servo overhaul folding with program memory, Robatec electronic top gluing unit with 4 application heads, disc bottom gluing unit on the left, feeder with vibrator, belt crusher on the right, left up to max. 30 mm, additional central transport, folding floor module A2 with additional upper and lower centre transport, additional central transport in folding station, pneumatic kicker, counter, Bobst CUBE control, camera surveillance, Small box equipment, pneumatic press belt. Overhaul in 2026: cleaned, checked, painted and with new press belts as well as new feeder and transport belts. Other: Machine can be viewed by appointment while running.

Qty. 1 Second-hand Automatic Die Cutter Mfc.: Bobst Type: 102 E II Automatic Die Cutter Built: 1996 Speed: 7,500 Sheet per hour Max. Sheet Size 720 x 1020 mm Raised: 30 cm Steel Plate Feeder Lefthand Pull Sidelay Active Front Lays CUBE Touch Screen Computer Operation Chase with 1.0 mm Cutting Plate Centerline Micrometric Adjustment Quick Lock Chase Double Action Stripper Quick Lock Stripping Frames Spare Stripping Frames Selection Bars And Pins Non stop Delivery New Chains, Clutch & Brake 3 Years ago, only used as a backup machine since then

Reference ID PP-58237 Category Flatbed Die Cutter Manufacturer Bobst Model SP 142-ER Year Built 1985 Color - Impression - Working Hours 75690 Speed 6000 sheets/h Max. size 142 x 102 cm Min. size 70 x 50 cm Condition Good Location Europe Availability Immediately Machine Description Double Stripping working hours 75690

Reference ID PP-57800 Category Flatbed Die Cutter Manufacturer Bobst Model SP 130-E Year Built 1985 Color - Impression - Working Hours - Speed 7000 sheets/h Max. size 130x92 cm Min. size 58x45 cm Condition Good Location Europe Availability Immediately

Reference ID PP56956 Category Folder Gluer Manufacturer Bobst Model MEDIA 100 II-A2 Year Built 1999 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Brand: BOBST Model: MEDIA 100 II-A2 Year of Manufacture: 1999 Origin: Switzerland Condition: 100% functional Machine Availability: Can be inspected on site in running condition Working Formats Maximum working width: 1000 mm Minimum working width: 126 mm Minimum board width before gluing: approx. 100 mm Maximum unfolded box length: 600 mm Minimum box length: 60 mm Maximum format: at least 600 mm Note: According to the operator, larger boxes may also be produced on this machine; final confirmation should be checked in the technical documentation. Example: A format of at least 600 mm can be processed, based on 150 mm x ...