subcategories
(3rd category level)
Manufacturer:
(Category: 836)
Designed for closing Wire-O® bindings up to 430 mm in width. This unit is not equipped with a hanger feeder and is therefore not suitable for calendar production with hangers. However, this machine is perfectly suited for the production of books and other Wire-O® bound documents. Includes a complete set of closing tools for all common Wire-O® sizes (2:1 and 3:1). Technical specifications: Max. binding width: 430 mm Supported Wire-O® sizes: 1/4” to 1” (2:1 and 3:1 pitch) Output: up to 1,000 books/hour Operation: semi-automatic No calendar hanger feeder included Includes full set of closing tools Power: 230 V / 50 Hz / 3 A
Cyklop DTM 22 electric tape dispencer - on a trolley - two tape length can be pre-set - cuts and wets the tape automatically - Including +/- 50 reels of 70mm wide tape
2 x Audion Elektro Sealboy working width 26 cm one of them has a knife to cut the foil for working with tube foil from the roll 1 x tube foil 250 mm width
Haug AG35 generator charging unit for making products static or antistatic See soecificationa in the pictures
Nipper - Double action hydraulic nipping press workingwidth: 420 mm up to 6.000 kg pressure refurbished and we will install a new pump after order
Morgana Autocreaser 33 year: paperweights: 70-400 grams Vacuum autofeed with alignment 16 creases per sheet 9 programs max size: 730 x 330 mm min size: 160x140 mm
Semi-automatic setting Commander with touchscreen Book measuring table Stand-alone pre-heating device : IR Infeed conveyor Star feeder Rounding and backing station Glue unit (Excluding gauzing station) Book mark suction device Head and tail banding station Casing-in station Case pre-stacking conveyor Case bending station Müller Martini VBF EP 680L : Semi-automatic setting, Pressing station, Left hand infeed Book Stacker, Müller Martini BLSD 650 D
Back finishing with NAGEL SP PLUS SQUARE PRESS. Flat, rectangular pressing of the booklet spine by means of a special pressing system Max. number of sheets of the brochure up to 30 sheets (80 g/m² paper) Max. power (set/hour) for single pass 1600 hours Double pass 1400 hours Booklet sizes min.(mm) 70 x 105 Booklet sizes max.(mm) 350 x 250 Power supply (V) 230 Volt Net weight (kg) 100 Gross weight (kg) 120
- 4 head drilling machine - with the existing accessories
A nice condition Akebono paper strapping machine with floor trigger. Including 5 rolls of repro paper rolls.
Wire stapling machine with 2 stapling heads for 0-25mm stapling
Block size press Müro 5000/A4 WT; good condition; cleaned and tested; Heat baffle; Stack increase; with dryer. Block gluing machine Müro 5000/A4 WT; good condition; cleaned and checked; pile elevation; heating sheet; with heater.
Counting forklifts / compensating stackers Max. format: 500 x 340 mm, number of pages tabloid 96, broadsheet 48 Min. format: 148 x 105 mm, number of pages tabloid 4, broadsheet 4 Can handle single specimens (distance min. 10 mm) or scale current (distance min. 40 mm). Lateral offset max. 5 mm. Specimen thickness max. 6 mm / Flow height max. 10 mm Layer height max. 170 mm / Package height max. 350 mm Height inbound min. 500 / Height of infeed conveyor max. 1250 mm
max. format 36 x 36 cm Year of construction 2010 Banding device Computer control with monitor US 2000 Corner Slider CL Banding Station for paper and foil tapes max. stacking height 30 cm Mobile substructure Delivery date: immediately Price on request. We supply and install worldwide.
number of heads: 4 serial no.: 92.847 bore diameter: 3-8 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
blowers Müro block glue presses; Condition used; 2 pcs.; 1x old connector, 1x new connector; cleaned and checked for function. Heater Müro padding press; condition used; two pic.; one old connector, one with new connector; cleaned and checked on function.
Müro A4/5000 block size press; good condition; cleaned and tested; Heat baffle; Stack increase; optionally with dryer. Block gluing machine Müro A4/5000; good condition; cleaned and checked; pile elevation; heating sheet; for option with heater.
- Standard model - for right side unloading - with existing accessories
Size: 800 x 1200 mmEquipments:Good condition without any damageMaximum stacking height: 1350 mmMinimum stacking height: 650 mmPlatform width: 1250 mm
used
HUNKELER POST-PROCESSING SYSTEM (unwinding, punching, turning, rewinding) The line consists of: Position 1: UNWINDER HUNKELER UW4 G 7119 (M. No.: 659595 // Age: 2001) Position 2: CROSS and LENGTH CUTTER HUNKELER AM 520-W 7150 (M.No.: 1509697 // Age: 2004) Position 3: TRANSFER STATION HUNKELER PU 520-W 7150 (M.No.: 2010062 // Age: 2008) Position 4: PUNCHING & PERFORATING UNIT HUNKELER DM 520-W 7152 (M.No.: 1509697 // Age: 2004) Position 5: TURNER HUNKELER WM 520-W (M.No.: 1509697 // Age: 2004) Position 6: CUTTER (TRANSVERSE and LENGTHWISE)HUNKELER CU 520-W 7154 (M.No.: 1509697 // Age: 2004) Position 7: CRISS CROSS DELIVERY ERTEC STSC-2 (S.No.: 34 // Age: 2008) Position 7.1: Brand new (never used) FOLDING UNIT FS4 7127 (M.No.: 1509697 // Age: 2004), can be used instead of the display Position 8: CRANE
Year of manufacture 1985 7 drilling spindles Adjustable drill spindle spacing incl. base electr. Drive electr. Foot switch Delivery date: immediately from stock Price on request. We supply and install worldwide.
VAN DEN BERGH FOIL-WIZARD (Hot foil stamping) INCL. ROLL UNWINDER HUNKELER S. No.: 02048020376 Equipment / Additional information: Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001)
Reference Num.: 4274Brand: BOBSTType: SP 142 CERConstruction year: 1995Available: directlyStatus: In productionLocation: Deutschland
