subcategories
(3rd category level)
Manufacturer:
(Category: 836)
Gluing machine for sheets or board, Manufacturer: HUNKELER, Model: LAM500, refurbished machine with several new parts, Width: 500 mm, Options: for PVA glue
Gluing machine for paper, Hunkeler, Model LAM600, Year 1990, Width 600 mm, Available Direct, Width: 600 mm
Wire-O punching machine, Make JBI, Model K50T, Year 1991, Workingwidth 500 mm, Tools 1 x 3:1 with round holes for books, I5542423 1 x 3:1 with round I5542423 holes for calenders, Available Direct, Workingwidth: 500 mm, Tools: 1 x 3:1 with round holes for books, 1 x 3:1 with round holes for calenders
Wire-O closing machine, Make JBI, Model MAG C54, Year 1991, Workingwidth 540 I5542423 mm, Details for closing all I5542423 sizes, Available Direct, Workingwidth: 540 mm
Wire-O closing machine, Make JBI, Model MAG C54, Year 1991, Workingwidth 540 I5542423 mm, Details for closing all I5542423 sizes, Available Direct, Workingwidth: 540 mm
Automatic punching machine for Wire-O and more, Make JBI - Lhermite, Model Lhermite EX610, Year 1985, Minimum size 90 x 110 mm, Maximum size 530 x 610 mm, Capacity up to 2.5 mm thickness depending on materials, Speed up to 8.400 cycles per hour depending on size and materials, 4 Tools:, Wire-O punch 3:1 with square holes, Plastic comb punch, Spiral bind opunch, 4 Hole punch for ringbinders, Minimum size: 90 x 110 mm, Maximum size: 530 x 610 mm, Capacity: up to 2.5 mm thickness depending on materials, Speed: up to 8.400 cycles per hour, depending on size and materials, Tools: Wire-O 3:1 with square holes, platic comb punch, spiral punch, 4 hole punch for ringbinders
Foil press, Make Kensol, Model K36T, Year 1970 ?, Operation by lever=manual or by pneumatics (2 hand I5542423 operation, Size of the I5542423 plate 150 x 200 mm, Available direct, Operation: by lever=manual or by pneumatics (2 hand operation, Size of the plate: 150 x 200 mm
Corner pulling`for board - universal press, Knife: 5 mm raidus pulling tools to make round corner for board
Universal cutter, Make Konrad Ströbel, Model 500, Year 1970, Knives included the machine comes with an index cutting tool made of high quality metal and hardened shafts, 90 degree sharp corner. (Dovrie), New ball bearings for the electric motor, New overload protection main switch, Available direct, Knives included: the machine comes with a index cutting tool made of high quality metal and hardened shafts, 90 degree sharp corner. (Dovrie), Voltge:: 380 volts
Bandall BA48 30-30, Arch size 48x30 cm, band width: 30 mm, welding by heat, for jumbo rolls, in perfect working order, a few parts have been replaced
Creasing & Perforating machine, Kroll, Model 700, Year 1960´s, Working width 700 mm, Tools some tools, but not worth mentioning, Available direct, Working width: 700 mm, Tools: some tools, but not worth mentioning
Foil stamping - embossing, Make PB&E, Model Comet, Year 1980, Size of the plate 150 x 200 mm, Foil transport Automatic by pneumatic arm, Condition machine can be purchased refurbished or as-is, Details automatic foil transport (adjustable foil pull) adjustable embossing time, automatic table movement, Available Direct, Size of the plate: 150 x 200 mm, Foil transport: Automatic by pneumatic arm
Nipping press - pneumatic, Make Probook Engineering, Model Nipper, Year 2005, Working width 350 mm, Available direct, Working width: 350 mm
Foil stamping - embossing - semi automatic, Make PB&E, Model Meteor, Year 1980, Size of the plate 420 x 510 mm, Foil transport both longitudinally and transversely, Condition machine is currently being refurbished, Details automatic foil transport (adjustable foil pull) adjustable dwelling time, adjustable embossing time, Size of the heating plate: 305 x 470 mm, Size of the mounting plate: 300 x 400 mm (a bigger plate is possible), Size of the shuttle table: 420 x 510 mm, Foil transport: both longitudinally and transversely, Pressure: up to about 10 tons
Nipping press - manual, Make Robust, Model FNP500, Year 1980´s, Width 500 x 250 mm, Options up to 100 mm thickness, Available Direct, Width: 500 x 250 mm, Options: up to 100 mm thickness
Casing-in machine, Make Schmedt, Model Präleg HHS1801, Year 1998, Minimum size 80 x 110 x 2 mm, Maximum Size 340 x 320 x 80, Speed up to 200 cycles per hour, Available direct, Minimum size: 80 x 110 x 2 mm, Maximum size: 340 x 320 x 80, Speed: up to 200 cycles per hour
Casing-in machine, Make Schmedt, Model Präleg XL HHS1815, Year 1999, Minimum size 80 x 110 x 2 mm, Maximum Size 450 x 440 x 80, Speed up to 200 cycles per hour, Details optionally we can supply the machine with a waffled glue roller, Available direct, after order machine will be completed with a cover,, 2 leak trays, etc., Minimum size: 80 x 110 x 2 mm, Maximum size: 450 x 440 x 80, Speed: up to 200 cycles per hour
Case rounding machine, Size: 600 mm working width and spine width up to 100 mm
Case rounding machine, Make Schmedt, Model Prärund HHS17-45, Year 1997, Size 450 mm working width and spine width up to 100 mm, Available direct, Size: 450 mm working width and spine width up to 100 mm
Case rounding machine, Make Schmedt, Model Prärund HHS17-45, Year 1997, Size 450 mm working width and spine width up to 100 mm, Available direct, Size: 450 mm working width and spine width up to 100 mm
Creasing/scoring/cutting machine, Working width: 800mm, Feeder: can be connected to any sheet feeder or used in-line, we can supply a feeder on request as wel as a delivery belt or jogger
Nipper - Double action hydraulic nipping press, Make Splek (Sperr & Lechner), Model Nipper, Nipping width 420 mm, Thickness up to 90 mm adjustable, Pressure up to 3.200 kg, Details on request we can retrofit the machine with the activation arm, Available direct, Nipping width: 420 mm, Thickness: up to 90mm adjustable, Pressure: up to 3.200 kg
Full surface gluingmachine, Width 800 mm, Glues cold PVA glue, Details machine modified to topgluing machine, Width: 800 mm, Glues: cold PVA glue
Perforating machine, espcially great for embroidery card punching, Make Walter Kroll, Model 900, Year 1960´s, Working width 900 mm, Tools 1 tool for Embroidery cards with 2 mm holes with 5 mm distance and 4 rows in 1 punch, 1 tear perforation tool with 1 mm holes, Details this Hydraulic driven machine does have a mechanical computer that has so called tabs that can be put on/off and adjusted. this determines the pulling distance, also they are exchangable for another program that you can make yourself from a threaded rod., Available direct, Working width: 900 mm, Tools: 1 tool for Embroidery cards with 2 mm holes with 5 mm distance and 4 rows in 1 punch, 1 tear perforation tool with 1 mm holes
Roller press, Make Swift, Model roller press 61, Year 1980´s ?, Width 610 mm, Available Direct, Width: 610 mm
Roller press, Make Swift, Model Roller press 76, Year 1980´s ?, Width 760 mm, Available Direct, Width: 760 mm
Joint Burning machine, Wolk, JB 360, Size 360 mm, Available Direct, Size: 360 mm
Casing-in machine, Zechini, Model Gamma, Year 2000, Working width 420 mm, Thickness 100 mm (electrical adjustable), Details After order machine shall be completed with new side dams, new glue bin, and new glue adjustment gears, Available Direct, Workingwidth: 420 mm, Thickness: 100 mm (electrical adjustable)
Case rounding machine, Unknown, Model 600, Year 2000´s, Working size 600 mm, Available Direct, Working size: 600 mm
