Manufacturer:
(Category: 705)
150 l stainless steel container Manufacturer : Sartorius Technical specifications : 150 litre stainless steel tank, heated, double jacket Interior: -1/+3 bar pressure and vacuum resistant Operating temperature 150 °C Double jacket: -1/+4 bar pressure and vacuum resistant Operating temperature 150 °C Documents available GMP Standard mobile
Test chamber for stability tests Manufacturer: Vötsch Type VP 1300 Pharma For investigations of the shelf life of medicines. The test systems of the VP series have been specially developed for the requirements of laboratories according to the ICH guidelines Test room volume: 1300 l Temperature test: +10 °C to +50 °C, +5 °C to 60 °C Climate test: +10 °C to 50 °C Nominal power 2.7 kW Humidity range: 20% to 90% RH Weight 250kg Documents available
Laboratory homogenizer mixer Manufacturer: Becomix Type: RW 2.5 Usable volume 2.5 liters Technical specifications : Vacuum homogenizing system Mobile table version Usable space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Capacity 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Content 2 litres Equipment: Agitator with wall scraper 20-160 rpm Left-hand rotation/counterclockwise rotation and alternating left-right rotation Homogenizer 500-6,600 rpm Surface in the product room is highly polished The following components are integrated: Vacuum pump Heating PLC control PC with process visualization and automation software Documents: available
Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (powder jet), water-cooled motor. Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ
Vacuum water degassing system Manufacturer: GEA/Filler Pack Type ONEX Capacity: 30,000 L/hour, 300 HL/hour Technical specifications : The facility is 2-stage Residual oxygen content
Process Vessels Manufacturer: Schwarte-Milfor Capacity 750 l Cylindrical process vessel standing on feet, hermetically welded insulation, Double jacket, WGR MR 125 magnetic agitator on the bottom, agitator flange on the underbody (drive missing) Product space: vacuum and pressure resistant -1/3 bar, operating temperature -10/150 °C Interior polished, double jacket: Pressure-resistant up to 3 bar, operating temperature 150 °C the measurements are: Total height approx. 2,300 cm Diameter approx. 1,050 cm cylindrical height approx. 1,300 cm Feet 300 cm high Double jacket inlet and outlet DN 25 Last Assignment Pharmacy very good condition
Sterile/Aseptic Containers Manufacturer : Vogelbusch Capacity: 18100 liters Technical specifications : Cylindrical, upright stainless steel tank with double jacket Weight 3950 kg Loading room: Pressure- and vacuum-resistant +4/-1 bar Test pressure 6.5 bar Operating temperature 145 °C Material 1.4435 Boiler room: Pressure- and vacuum-resistant +4/-1 bar Test pressure 6.5 bar Operating temperature 145 °C Capacity 230 litres Material 1.4404/316 l/ the container was used in the pharmaceutical industry for sterile water insulating sheet outside is screwed would have to be partially replaced, as the container is equipped with glass wool is insulated, the sheet metal was deformed during transport. Equipment: Manhole Hand hole DN 200 Cip nozzle DN 50 2x sight glass Rupture disc Cooling/heating jacket inlet and outlet DN 25 GMP Various supports Manhole: ...
GLATT coating turbine, Glatt GC 750/500 enrobing machine from 1994 with interchangeable drums, explosion-proof version (Ex), - Processing equipment: Glatt GC 750 Coater (equipment used only for testing), - Perforated drums (diameters 500 mm and 750 mm) with:, Air intake and discharge housings for both drums, Drum capacity 750 mm: 50 – 75 kg/batch, Drum capacity 500 mm: 15 – 45 kg/batch, - Manual unloading, - Spray arm with nozzle adapter, Spraying system with 1 Schlick nozzle, - Control cabinet (pneumatic/electric) with Siemens S5 PLC, - Air handling unit (AHU) 7AIR comprising:, - Inlet air fan, - Filtration F7 and H12, - Preheating, - Dehumidification, - Heating, - HERDING Dust Collector, - Outlet air fan, - WIP spray nozzle (in-place cleaning) inside the drum and external nozzle, Elec: 3x400 / 24VDC / 50Hz , Useful volume: 500mm: 15-45kg 750mm : 50 - 75kg , Spray nozzles: X, ...
Removal of label from the top with label dispensing system AVERY type ALX734LH, Sold with its stainless steel mast., Labeler / Stickerer AVERY DENISON type ALX 734LH :, - Printing speed: 50 to 400 mm/s, - Print width: 104 mm max, - Ribbon width: 20-140 mm, - Label production: Up to 400 labels, - Label width: 30 to 134 mm, - Label length: 25 to 225 mm, - Chuck diameter: 38.76,102 mm, - Roll diameter: 300 or 400 mm, Minimum label deposition height (mm): 1225, Maximum label deposition height (mm): 1400
Motorized curved stainless steel belt conveyor, Width of strip 100mm, Adjustable feet in height up to 150 mm, Motorized conveyor: Yes , Conveyor length (mm): 700mm, Conveyor belt width (mm): 90mm, Maximum working height (mm): 1050mm, Electric: Motor: SEW-USOCOME: 230 V / 50 Hz / 0.55 kW , Speed variation: no
Stainless steel magazines/cassettes for the handling (loading and unloading) of ampoules, vials, etc., internal magazine dimensions approx. 445 x 150 x 75 mm (LxWxH); external magazine dimensions including lid approx. 445 x 150 x 90 mm, includes mobile rack trolleys (overall dimensions approx. 1,300 x 660 x 1,380 mm (LxWxH)) with rollable magazine trolleys (dimensions approx. 910 x 650 x 1,020 mm (LxWxH)), capacity per rack trolley 48 magazines/cassettes, a total of 50 rack trolleys with a total quantity of 2,400 magazines/cassettes are available
The ZANASI 40 E model is a reciprocating motion machine designed for the processing and filling of two-piece hard capsules, as well as their sequential closing and ejection., Possibilities for powder dosing as well as granule dosing., Several powder formats available:, Full format:2,4, Cadence / hour: 40 000 capsules/hour , Positions: 6 , Machine absorption (Kw): 2.2 kW , Elec: 380 V / 50 Hz / 14.2 A
Markem Imaje UI 100 control panel., Connects to a MARKEM laser marking system
Dissolution tester SOTAX CE70., SOTAX CY 7-50 Pump, Sold with accessories., Positions: 7 , Elec: 230 V
1200 litre process vessel Manufacturer Prai HiPurity Systems Ltd. Type IMV – 1200 W, H – 14471 unused Year of construction 2015 electro-polished Double-jacket, pressure-resistant Product room 3 bar Double jacket 4 bar Operating temperature 165° C Magnetic agitator on the underbody, Fabr. Merck Millipur Type GMP Drive 2000 Extensive documentation available, including qualification documents
Paste mixer Manufacturer: MTI Type P-10ADO Performance: Usable volume 11 litres, nominal volume 15 L Technical specifications : The paste mixer is suitable for mixing, homogenizing, dispersing and suspension of low to high viscosity products, Externally heated up to 65 °C and vacuum-proof Heating cooling jacket 5 bar Product space 0.75 Equipment: Machine stand Transmission suspension with drive motors Flanged weelen bearing with container lid and mixing tools Mixing tanks Squeezing device Electrical control Dimensions: Length 1210 mm Width 1180 mm Height 1925 kmm Weight 1700 kg
Stainless steel tanks Manufacturer Noorden Capacity 500 litres Mobile standing stainless steel tank Double jacket for heating and cooling without pressure Product space pressure- and vacuum-resistant -1/+3 bar Operating temperature product space around jacket 150 °C Magnetic stirrer on the underbody Power 0.25 kW Outer diameter: 0.90 m Total height 1.95 m Spout DN 25 Clamp
Stainless steel tanks Manufacturer Tannroda GmbH, stainless steel construction Type SLT/BB 001 - No. 548 Capacity 2200 litres Cylindrical stainless steel tank standing on feet Material in contact with the product 1.4404 Interior -1/+3 bar Double-jacketed pressure and vacuum resistant Heated and cooled Agitator The container has a slight vacuum damage in the interior, see picture. Drawing available, documents available
Eddy current screening machine with belt drive Manufacturer: Kemutec KEK Type K 800 C Version - ATEX 2/3 D
Dental colloid mill Manufacturer: Probst & Class PUC Type 10 L Power 7.5 kW U/2.910 min.
Inline homogenizer Manufacturer: Higra Mix Type HG 140 Capacity: 40,000 l/h Power: approx. 30 kW Speed: 3,000 rpm Dimensions: Length 1100 x Width 450 x Height 600 cm Net weight: 220 kg Mixing chamber: diameter 185 mm Product inlet: DN 100 Product outlet: DN 80 The homogenizer is designed for the production of emulsions and suspensions with a wide range of viscosity.
100 litre process tank Manufacturer: Hermann Waldner Content: 100 litres Technical specifications : cylindrical standing stainless steel tank with double jacket, insulation and agitator Material container 1.4435 Operating temperature 80 °C Material double jacket 1.4404 Pressure-resistant 2.5 bar Operating temperature 90 °C Capacity 22 litres Equipment: Propeller agitator Spout at the bottom center Agitator from above Documents: Nameplate
50 litre stainless steel container Manufacturer: Waldner Content: 50 litres Technical specifications : cylindrical standing single-walled stainless steel tank Material 1.4301 Operating temperature 40 °C Propeller agitator kW 0.37, 1,405 rpm the interior of the container is plastic-coated Spout at the bottom center Documents: Nameplate
Mixer Manufacturer : AVA Huep GmbH & Co. KG Type: HTL 3 Power: 1.1 kW Content: 4 liters gross volume Technical specifications : Stainless steel mixers for powdery to paste-like products Dimensions Speed 15-400 rpm, rated speed 128 rpm Frequency-controlled Width approx. 512 mm Height approx. 701 mm without table Length approx. 1076 kg Weight approx. 200 kg Documents: available
Rimek Compressor, 10 stations, 6 tons of compression, For B-type tooling, Maximum diameter of tablets 16mm, Maximum filling 17mm, Maximum rate 18 000 tablets / hour, Number of revolutions per minute: 30, Sold with several formats:, round diameter 6 mm incomplete (1 die missing)., round diameter 7 mm complete, round diameter 12 mm complete, oblong diameter 18x7 mm complete, Elec: 230 V / 50 Hz , Dimensions (mm): 563x530, Cadence / hour: 18000, Number of revolutions/min: 30, Compression (kN): 6 tons , Maximum tablet dimensions (mm): 16, Maximum powder filling height (mm): 16, Machine height with hopper: 1565, Machine height without hopper: 1535, Format sold with the machine: Yes
Electrically heated process vessel Filling device Manufacturer: Haas Type FMSX consisting of: Electrically heated agitator tank with a capacity of approx. 90 litres Heated Mouvex piston pump, electric heater, control cabinet with Siemens PLC and FU for pump and agitator, in a mobile stainless steel frame.
Plate apparatus Manufacturer APV Type K 55 Capacity: 8,000 litres/hour Technical specifications : 6 Departments 1x steam, 1x hot water, 2x product vs. product, 1x cold water, 1x ice water Capacity 8,000 litres/hour Clip seals 423 plates total Material Plates AISI 316 (V4A), thickness 0.8 mm 1 box with replacement seals is still included. good condition Documents partially available
In-line homogenizer with high shear force Manufacturer BWS Technologie GmbH Type S 200 Material parts in contact with the product 1.4462 Double-acting mechanical seal Motor explosion-proof Output 22 kW, liter output max. 10,000 l/h Suitable for dispersing, emulsifying and homogenizing
Process Vessels Net capacity 250 litres, gross capacity 339 litres Pharmaceutical version Agitator Polished interior Product space: Pressure-resistant up to 2.5 bar, operating temperature 138 °C Double jacket: Pressure-resistant up to 4 bar, operating temperature 151 °C mobile
