subcategories
(3rd category level)
Manufacturer:
(Category: 705)
Mixer Manufacturer : AVA Huep GmbH & Co. KG Type: HTL 3 Power: 1.1 kW Content: 4 liters gross volume Technical specifications : Stainless steel mixers for powdery to paste-like products Dimensions Speed 15-400 rpm, rated speed 128 rpm Frequency-controlled Width approx. 512 mm Height approx. 701 mm without table Length approx. 1076 kg Weight approx. 200 kg Documents: available
50 litre stainless steel container Manufacturer : Hermann Waldner Content: 50 litres Technical specifications : cylindrical standing single-walled stainless steel tank Material 1.4301 Operating temperature 40 °C Propeller agitator kW 0.37, 1,405 rpm the interior of the container is plastic-coated Spout at the bottom center Documents: Nameplate
100 litre process tank Manufacturer : Hermann Waldner Content: 100 litres Technical specifications : cylindrical standing stainless steel tank with double jacket, insulation and agitator Material container 1.4435 Operating temperature 80 °C Material double jacket 1.4404 Pressure-resistant 2.5 bar Operating temperature 90 °C Capacity 22 litres Equipment: Propeller agitator Spout at the bottom center Agitator from above Documents: Nameplate
Load capacity 70 kg Fork mount with rectangular tubes, tube centre distance 368 mm, tube length 435 mm Lifting height max. 1,540 mm (floor to lower edge of tube) Parking brake Mobile Next VDE test 03/25 Electrically rechargeable with charger 230V/50Hz
Jörgensen tablet press type 075HK3, built in 1961, with accessories, poor condition
Inline homogenizer Manufacturer: Higra Mix Type HG 140 Capacity: 40,000 l/h Power: approx. 30 kW Speed: 3,000 rpm Dimensions: Length 1100 x Width 450 x Height 600 cm Net weight: 220 kg Mixing chamber: diameter 185 mm Product inlet: DN 100 Product outlet: DN 80 The homogenizer is designed for the production of emulsions and suspensions with a wide range of viscosity.
Dental colloid mill Manufacturer: Probst & Class PUC Type 10 L Power 7.5 kW U/2.910 min.
Eddy current screening machine with belt drive Manufacturer: Kemutec KEK Type K 800 C Version - ATEX 2/3 D
Vertical cartoner, semi-automatic 2 operating modes: intermittent, continuous Intermittent output max. 50 packs/min Continuous output max. 110 packs/min Format range folding carton d 18-80, w 20 - 120, h 50 - 250 mm Folding carton removal with suction cups Blind embossing for lower tuck-in flap (without embossing roller) Leaflet inserter for pre-folded leaflets Bad ejection Outfeed conveyor Vacuum pump Partial enclosure with segment doors PLC Siemens S7-300 HMI Promatic UniOP Drive 400V/50Hz
Stainless steel tanks Manufacturer Tannroda GmbH, stainless steel construction Type SLT/BB 001 - No. 548 Capacity 2200 litres Cylindrical stainless steel tank standing on feet Material in contact with the product 1.4404 Interior -1/+3 bar Double-jacketed pressure and vacuum resistant Heated and cooled Agitator
Stainless steel tanks Manufacturer Noorden Capacity 500 litres Mobile standing stainless steel tank Double jacket for heating and cooling without pressure Product space pressure- and vacuum-resistant -1/+3 bar Operating temperature product space around jacket 150 °C Magnetic stirrer on the underbody Power 0.25 kW
150 l stainless steel container Manufacturer : Sartorius Technical specifications : - 150 litre stainless steel tank heatable, double jacket Interior: -1/+3 bar pressure and vacuum resistant Operating temperature 150 °C Double jacket: -1/+4 bar pressure and vacuum resistant Operating temperature 150 °C Documents available - GMP standard mobile
Paste mixer Brand: MTI Type: P-10ADO Power: usable volume 11 litres, nominal volume 15 l Technical specifications : The paste mixer is suitable for mixing, homogenizing, dispersing and suspending low to high viscosity products, Externally heated up to 65 °C and vacuum-proof Heating cooling jacket 5 bar Product space 0.75
Dental colloid mill Manufacturer: Gronfa Type DC Year of construction unknown Grinding gap adjustment, conical grinding set with adjustable gap size Power 2,935 rpm, 18.5 kW
Filling Machine Manufacturer: Würschum Type VH 150 Volume Minimum 3 ml Maximum 150 ml Manual filling machine for pastes and creams
Semi-automatic with rotary table Max. Tool dimensions 300 x 500 mm Max. Tool height 120 mm Max. output 16 cycles/min Moulding and sealing possible with one tool Temperature for forming and sealing plate can be set differently Two-hand operation 1 tool set available PLC Omron SYSMAC CPM1 Touch panel Mobile Drive 400V/50Hz
Semi-automatic with rotary table Max. tool dimensions 200 x 400 mm Max. tool height 120 mm Output max. 16 cycles/min Forming and sealing possible with one tool Temperature for forming and sealing plate can be set differently Two-handed operation Without tool set Drive 230V/50Hz
Semi-automatic machine with rotary table Max. Tool dimensions 300 x 500 mm Max. tool height 120 mm Max. output 16 cycles/min Moulding and sealing possible with one tool Temperature can be set differently for moulding and sealing plate Two-hand operation Without tool set Drive 230V/50Hz Incl. an additional Universal 500 FS deep-drawing/sealing machine as a spare parts carrier
Semi-automatic machine with rotary table Max. tool dimensions 200 x 400 mm Max. tool height 120 mm Max. output 16 cycles/min Moulding and sealing possible with one tool Temperature can be set differently for moulding and sealing plate Two-hand operation Without tool set Drive 230V/50Hz
Vibrating Screening Machine Manufacturer: Vibra Schultheis Type VSB No. 07 327 2-cover screen, stainless steel 3x Screen frame without covering Diameter 60 cm Power 0.75 kW
Single rotary press 36 punching stations Upper-lower punch EU-B (diam. 19 mm), die EU-BB (diam. 24 mm) Pressing/pre-pressing force max. 80/10 kN Tablet diam. max. 13 mm Filling depth max. 19 mm Output max. 264,000 tablets/h Keyed turret (lower and upper punch) Forced feeder Filling funnel nozzle present, filling funnel not present Stainless steel Design Without tabletting tools HMI Courtoy multi-control PLC B+R NT 44 Drive 400V/50Hz This machine is being offered at a special price and is being sold as is without a technical inspection.
Stainless steel tanks Manufacturer Concept Type PH-1-011 Capacity 4200 liters Material V4A in contact with the product Cylindrical stainless steel tank standing on feet Product space: pressure-resistant/vacuum-resistant +3/-1 bar, operating temperature 143 °C Double jacket: pressure-resistant 3 bar, operating temperature 143 °C No agitator
Pure steam generators Manufacturer Stilmas Type PSG 50 /DTS Clean steam volume 0-max. 50 kg/h at pure steam pressure 3 bar or pure steam volume 0-max. 100 kg/h at pure steam pressure 1 bar The process guarantees the production of dry, sterile, pyrogen-free, pure steam that is free of particles or metal bions.
Dental colloid mill Manufacturer: Probst & Class PUC Type 10 L Power 7.5 kW RPM 2910
Vacuum water degassing system Manufacturer : GEA/Füllpack Type: ONEX Capacity: 30,000 L/hour, 300 HL/hour Technical specifications : The facility is 2-stage Residual oxygen content
Process Vessels Manufacturer: Schwarte-Milfor Capacity 750 l Cylindrical process vessel standing on feet, hermetically welded insulation, Double jacket, WGR MR 125 magnetic agitator on the bottom, agitator flange on the underbody (drive missing) Product space: vacuum and pressure resistant -1/3 bar, operating temperature -10/150 °C Interior polished, double jacket: Pressure-resistant up to 3 bar, operating temperature 150 °C the measurements are: Total height approx. 2,300 cm Diameter approx. 1,050 cm cylindrical height approx. 1,300 cm Feet 300 cm high Double jacket inlet and outlet DN 25 Last Assignment Pharmacy very good condition
The Videojet DataFlex 6530 from 2022 offers an efficient solution for labeling, signing and coding tasks in various industries. The thermal transfer printer impresses with its high printing speed and precision, making it ideal for production environments with high demands., The DataFlex 6530 is a high-speed thermal transfer printer that helps you increase uptime and improve your operational productivity. Significantly reduces time spent on quality inspection, scrap and rework. This is the industrys first airless model with a 107 mm width., Designed for applications such as vertical filling and sealing, the 6530 offers print speeds of up to 1000mm/s and throughput of up to 700pp. Known for its user-friendly operation and easy integration into existing production lines, the DataFlex 6530 offers a flexible and cost-effective way to print accessible text, graphics and barcodes on a wide rang ...
Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1100, Powder outlet height (mm): 815
COURTOY R292F Compressor Missing the 2 compressed descents and the cables between the electrical cabinet and the machine; All the documentation including the electrical diagrams is present (in French), Punch type: D, Weight (kg): 4500 , Cadence / hour: 43,000 - 350,000, Compression (kN): 100, Precompression (kN): 10, Maximum tablet dimensions (mm): 25,40, Die outer diameter (mm): 38,10, Matrix height (mm): 23,81, Punch diameter (mm): 25,40
Lobe pump, Motor type: SK 160L/4 TF, Engine type: SK 160L/4 TF, Engine power: 50 Hz 15 kW 380 V , Link to manufacturer: .alfalaval.fr/, Dn (mm): 77, Pump: Obe pump , dn (mm): 77
GS-INDUSTRIESERVICE
