Manufacturer:
(Category: 705)
Color fill control to detect undermixing, size, location, fragments, and trapping Adjustable lighting Max. width of the blister web 320 mm Application: For tablets/oblongs/dragees/hard and soft gelatin capsules Test criteria: color/presence/size/shape/circumference/location/fragments/overfill 21 CFR Part 11 compliant Format versions are stored separately All system units installed in one box Update to the latest version by manufacturer Scanware possible
Sorting belt top, width 130 mm, length 600mm Sorting tape bottom, width 225 mm, length 700 mm Belt speed adjustable Feed hopper with adjustable vibration 2 Reading lights Various pulleys for tablet turning by 180 degrees for different tablet thicknesses: - Ø 110 mm for tablet thickness approx. 5 mm - Ø 115 mm for tablet thickness approx. 7 mm - Ø 118 mm for tablet thickness approx. 9 mm - Ø 120 mm for tablet thickness approx. 10 mm - Ø 125 mm for tablet thickness approx. 12 mm Drive 220V/50Hz
OCS Checkweighers GmbH HC-IS-D Flow checkweigher for containers with coding station Make: OCS Checkweighers GmbH Type: HC-IS-D Year of Make: 2009 Description: Flow checkweigher: • Specially designed for aerosol cans/bottles Ø 23 mm • Belt travel from right to left • Load cell SW-D-FS • Continuous flow with clock star for object Ø 23 mm • Weighing range 0.1 - 500 g • Output max. 100 weighings/min • e=d 0.05 g • Paper printer • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operator terminal • Without infeed conveyor to cycle star and without outfeed conveyor between cycle star and infeed camera box Coding station: • Holder for Domino inkjet printer (without printhead and inkjet printer) • Camera control of the object floor • Poor ejection camera/weight with blow nozzles • Connection 115/230V/50/60Hz
Make: OCS Checkweighers GmbH Type: HC Year of Make: 2009 Description: • Equipped for bottles • Pass with clock stars for object Ø 24 and 29 mm • Without conveyor belt • Weighing range 2 - 500 g • Capacity max. 200 weighings/min • e=d 0.1 g • Pass from left to right • Paper printer • Poor ejection due to pneumatic pusher • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operator terminal • Calibrated until 2014 • Height adjustable • Connection 115/230 V | 50/60 Hz
GRACO pneumatic pump, Max Flow: 9.5 L/MIN / 2.5 GPM, Max Air WPR: 1.2 MPa / 12 bar / 180 PSI , Max Fluid WPR: 6.2 MPa / 62 bar / 900 PSI
Disinfecting washer for laboratory., Upper basket for injection, Lower basket, Maximum cold water temperature (°C): 20 °C , Maximum hot water temperature (°C): 70 °C , External dimensions (mm): 730x900 H 845 , Interior dimensions (mm): 500x540 H 600
Ventilated safety cabinet with KOTTERMANN brand tray retention, Total retention volume 21.3 litres, With doors equipped with a cylinder to lock the doors open or to close them automatically., To connect to a centralized suction system via two DN70mm air inlets, 3 fixed shelves with retention:, - 1 shelf unit 385x515 H 220 mm (retention volume 5.8 Liters), - 1 shelf unit 385x515 H 220 mm (retention volume 5.8 Liters), - 1 shelf unit 285x1010 H 275mm (Retention volume 9.7 Liters), External dimensions (mm): 570x1200 H 745 mm
Motorized curved stainless steel belt conveyor, Width of strip 100mm, Adjustable feet in height up to 150 mm, Motorized conveyor: Yes, Conveyor belt width (mm): 90 , Maximum working height (mm): 1055, Electric: Motor: SEW-USOCOME: 230 V / 50 Hz / 0.55 kW
Vertical VAI packaging machine with dosing screw for powder., Sold with its platform and format., Pouch, Stopped in December 2025, Electrically renovated in SIEMENS S7, Mini format bag (mm): 40x30 h , Maxi format sachet (mm): 270x380 h , Cadence (bpm): 60, maxi format sachet (mm): 270x380 h , Elec: 380 V , Machine dimensions (mm): 2030x132 H 1670 , Platform (mm): 1810x180 H 2900 , Power (kW): 4
Security cabinet with forced ventilation from the KOTTERMANN brand, Ventilité tested and functional (230Volt), to be connected via a DN70 outlet, 3 shelves with mobile drawers and containment bins:, - 500x435 H 295 mm (volume of the tray 12 Litres), - 500x435 H 215 mm (volume of the tray 12 Litres), - 500x435 H 285 mm (volume of the tray 12 Litres), 1 fixed shelf, - 210x555 H 240 mm, Elec: 230 V / 50 Hz / 15 Watt , External dimensions (mm): 530x1200 H 720
Motorized belt conveyor., Motorized conveyor: Yes, Conveyor belt length (mm): 3000, Conveyor belt width (mm): 500 mm , Working height (mm): 390 mm , Electric: GYROS: 230 / 400 V / 50 Hz / 1.45/ 0.84 A / 0.25 KW , Speed variation: Yes
Safety workstation with cleanroom zone Manufacturer: Weiss Pharmatechnik Type: WIBObarrier vertical plus BGKVO 250/14 Year of Make: 2020 The workstation is still unused by the operator in Switzerland in 6 wooden boxes originally packaged by the manufacturer. This workstation was configured for a class D cleanroom and max. for OEB3 substances (medium toxic material) H 14 filtered clean air in quality ISO 5 according to EN 14644-1 with unidirectional flow and a flow velocity of 0.17 m/s to 1.00 m/s is led via the laminator in the hood area endash into the interior of the barrier via the product, so that a cleanroom zone is created here The visible surfaces are made of stainless steel 1.4301 and are brushed (RA
Fluidized Bed Processor Manufacturer: Lödige Machine Type: LFP 8 Bj. 2010 Suitable for drying and granulation (planned for preparations for in vitro diagnostic use) Batch operation Peristaltic pump for spray liquid Top spray nozzle for spray liquid Libra Volume of product container 24 L Batch volume max. 16 L Batch weight 1-8 kg (depending on product) Product suction lance from miller's barrel Conical transition piece for emptying in miller barrel Heating coil Star filter for separation of product and air flow Inflatable Seals Product temperature max. 85°C Explosion Pressure Shock Resistant Tank Max. explosion pressure 10 bar ATEX Zone 20 inside the mixer (according to conditions in 2010) Equipment category 1 according to Directive 94/9/EC Equipment Group II, D (Dust) Protection class IP 5x Max. surface temperature 180°C MP 277 Touch control terminal ...
Weighing range max. 750 g d=0.05 g e=0.1 g Load Cell EC 2000 Belt run from left to right Belt width 190 mm Center distances infeed conveyor/weighing conveyor/outfeed conveyor 480/240/480 mm Poor ejection by pneum. Ejector Without printer Not legal-for-trade Protective cover weighing area removable Height adjustable Drive 115/230V/50/60Hz
4 Edge Sealed Pouch Machine Manufacturer: Harro Höfliger Type: BRT II 120 L Year of Make: 2005 Fully automatic horizontal machine for 3-edge and 4-edge sealed bags for filling and packaging powdery products in double-bag operation (with perforation): Format range double bags (W x H) min. (2x50) x 50 mm, max. (2x80) x 260 mm Capacity max. 100 double bags/min (depending on bag size) Screw dosing SD 70/2 for double bags Main dosage min. / max. 2.5 – 90 g per sachet Microdosing min. / max. 0.3 – 5 g Max. roll Ø 600 mm Core Ø 76 mm Max. roll width 520 mm Gluing table with glue spot detection 2 pcs Allen Coding 5-line thermal transfer printers, individually switchable Longitudinal and Transverse Seam Heat Sealing Tool, Head Heat Sealing Tool Sealing stations manually adjustable Printing Mark Control Tearing aid by insertion needle Bag Inflation Device Bag op ...
Vacuum/pressure central agitator Manufacturer: Herbst Type: HRZV-S 40 HO Year of Make: 2003 Suitable for mixing powdered and liquid media Parts in contact with the product made of stainless steel 1.4435 (AISI 316 L) Usable volume 8-32 litres Operating pressure -1.0 to +10 bar Temperature range 0-130°C Max. product viscosity approx. 10,000 mPas Agitator tank 75 litres with double jacket 5 litres Feed vessel 3.3 liters, operating pressure 0-10 bar, operating temperature max. 150°C, Fabr. Jentec, year of construction 2015 Centrally located armature agitator, power 0.37 kW, speed range 10-50 rpm, additional conveyor elements on agitator shaft and outer anchor (product-lowering), scraper elements made of PTFE for container wall and bottom, double-acting mechanical seal, sealing fluid silicone oil Eccentrically mounted propeller agitator, 2-bladed Was operated with exte ...
Pharma Mixer Granulator Manufacturer: Diosna Machine Type: P 100 Bj. 1994 Gross capacity 122 l, net capacity approx. 37 - 100 l Mixing tool 1420/2840 rpm, 3.7/4.4 kW, drive with air gap seal Chopper tool 1420/2890 rpm, 2.8/3.5 kW, double-bladed, one-piece, drive with air gap seal Double-jacketed container for heating/cooling (without own heating/cooling unit) Probe Product Temperature Blind flange for retrofitting a DIOSNA mixing probe Sealable opening in the container lid for adding mixing components Nozzles for fluid addition Screw cap with degassing/vent filter Pneumatic spout, swivel for cleaning HMI with IPC Lauer VS486 installed on mixer in control cabinet with pressurized enclosure Protection class E Ex p (T4), Fabr. Gönnheimer, type F 800, control unit FS 821, control panel BT 81 4.1 Separate control cabinet (no Ex) with PLC Siemens S5-115U Drive 400/230/ ...
Pneumatic dimensional measurement device Solex Metrology, PNEUMATIC VERSION, Pneumatic metrology is a dimensional measurement technique for parts, presenting two important advantages:, - the great measurement precision, - measurement speed, This device is used for dimensional control of parts with holes whose dimensions must comply with very tight tolerances, parts that cannot be touched due to their surface condition, or parts with complex geometry., It has thus been present for many years in industrial sectors such as biomedical (prostheses), cosmetics (sprays), pharmaceuticals (dosing pumps), aerospace or automotive (mechanical parts), where it is recognized for its robustness, reliability and very high measurement precision., PRINCIPLE OF OPERATION, The principle is based on a pneumatic flowmeter that operates by direct reading of the drop or rise in pressure corresponding to the cha ...
Motorized vertical test bench IMADA MV-100BA., Dynanometer Chatillon:, 100 x .05 Lb, 50 x 05 Kg, 500 x .5 N
Ventilator, BINDER CO2 incubator, Volume 150 litres, 2 shelves, Internal dimensions (mm): 490x495 H 595, external dimensions (mm): 820x757 H 1175, Number of shelves: 2, Elec: 230V / 7.4 A / 50 Hz , Maximum temperature (°C): 60
Water treatment plant Manufacturer: BWT Type Osmotron 2000-PH-S System was overhauled in 2020, new control cabinet from 2021 Year of construction 2000 BWT Osmotron water treatment plant of BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production 1 piece of water treatment plant BWT Osmotron Plant of the company BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production, incl. • 90μm pre-filter with automatic backwash • Softening system in series operation (without hardening slip) and for 600 litre salt-plastic tank for regeneration • Heyl Testomat 2000 • 2 chlorine cells to reduce germs in the softeners • Reverse osmosis modules for 2000l/h • 4x SM20 EDI modules (electro-deionization modules) • Conductivity meter for permeate (after reverse osmosis module) Mettler Toledo • Conductivity meter for diluate (according to EDI modules) THORNTON 200 ...
Cell Cultures Bioreactor System / Fermentation System Make: Applikon Type Pilotscale PS 130 consisting of: 1. Applicon 130 liter bioreactor type PS 130L in stainless steel 316L electropolished Suitable for Mamilia - Product room 3 bar / vacuum - Double jacket 6 bar / vacuum - Agitator magnetically coupled, speed adjustable - Piping, heating, valves, filters, pumps, electrical cabinet, etc. - Mounted on frame and mobile - cGMP standard
Cell Culture Bioreactor System / Fermentation System Make: Applikon Type Pilot Scale PS 30 consisting of: Applicon 30 liter bioreactor type PS 30L made of stainless steel 316L electropolished Suitable for families - Product chamber 3 bar / vacuum - Double jacket 6 bar/vacuum - Agitator magnetically coupled, speed adjustable - Piping, heating, valves, filters, pumps, control cabinet, etc. - Mounted on a frame and mobile - cGMP standard Extensive documentation
Vial blister machine Manufacturer: Uhlmann Model No.: UPS4 Serial Number: 460 Bottles Carton Packaging 2 bottle feeders PACCONTROL PCL Production Capacity: • 15 to 50 cycles/min up to a punching depth of 12 mm • 15 to 40 cycles/min up to a punching depth of 28 mm Maximum feed length: 222 mm Format range: longitudinal 220mm x transverse 284mm Actual format: • Tray for 10ml ampoule (Ø17.5×87) and 10ml vial (Ø15×50), tray dimensions (LxWxH): 99x54x26 • Tray for five 10ml vials (Ø24×50), tray dimensions (LxWxH): 146x66x26 • Tray for a 10ml vial (Ø24×50), tray dimensions (LxWxH): 99x54x26 Thermoforming film diameter: • On the machine : 400mm • On bobbin holder : 800mm Coil diameter of the lidding film: max. 300 mm Min/Max Thermoforming Film Thickness: 0.15/0.5mm Width of the sheath material: • Thermoforming film: 145 to 300 mm • Cover fil ...
Wilco WILCOMAT W07 MC/LFC semi-automatic laboratory testing device for leak testing (CCIT) of parenterals, 1 test station, detection limit 10 microns, measurement principle based on the LFC test method (leak testing using the differential pressure method – non-destructive testing method for 100 per cent inspection), including format parts (test chambers) for 20 ml and 100 ml vials, B&R CP0291 PLC control, 12-inch touchscreen, Sogevac SV 25 B electric vacuum pump, Brother printer, electrical connection 230 V/50 Hz, power requirement 2.9 kVA/13 A, compressed air 5–10 bar, machine dimensions approx. 800 x 600 mm (L x W), machine height approx. 1,690 mm, machine net weight approx. 400 kg
Homogenizing Mixer Manufacturer: Ekato Unimix Type SRT 50 Order# 4808/2, Series# 70888. Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete documentat ...
Labeling with serialization Manufacturer: Uhlmann Type USP 2 Serialization, capacity max. 300 cartons/min. Consisting of: 1. Print/verification module with REAJET HR printing system and Visio Read camera system. 2. Tamper-evident protection module for labels on the front and back of the folding box. Format range: Folding carton width A: min. 30 mm, max. 130 mm Folding box height B: min. 15 mm, max. 105 mm Folding carton length H: min. 67 mm, max. 240 mm Max. oversquare format A/B = 1.5 Folding carton weight max 300 g GMP, last use Pharmaceutical
