Manufacturer:
(Category: 308)
Costarelli D1300 fully automatic agglomerator, 315 kW drive, was processing LDPE, can be used for film, fibers, fluff, light abd voluminous plastic materials to massive volume reduction., throughput rate around 1 Ton per hour, depending on moisture and material, including : loading conveyor belt, feeding belt, barrel diam.1.300 mm., extraction hopper, screw conveyor, roto-classifier, electric cabinet, 400 V 50/60 Hz, CE compliance certificate, electrical drawings, Users manual, Machine in very good conditions, -------------------------------------------------, watch some videos of similar agglomerators in the attached videos, capacity: 1.200 kg/h, conditions: very good, type: 1.300 mm , Totale power needed for this line: around 500 KVA, including belts, classifier, screws., Including: loading conveyor belt
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, conditions: used
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 14.000 lt.ca, inspection hatch on barrel, loading hopper, control panel, conditions: used
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, conditions: used
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used
A horizontal dual-head corner cleaning machine Stürtz for the simultaneous machining of two 90° internal and external corners on welded plastic windows is available. Tool stations top/bottom: 8/8, min. product dimensions X/Y without mullion machining: 320mm/370mm, min. product dimensions X/Y with mullion machining: 640mm/370mm, min. frame internal dimension X/Y: 180mm/180mm, max. frame dimensions X/Y: 4000mm/3000mm, installation depth range: 30mm-135mm, profile visible width range: 25mm-120mm, equipment: 4 gasket groove drilling units/4 internal corner measuring devices/4 shadow groove cutters/2 external contour units. Including various accessories and tools. Documentation available. An inspection on site is possible.
A Ferrarini & Benelli corona pre-treatment system for surface activation of non-conductive materials in continuous production processes is available. Generator type: C15/4N, output frequency: 15kHz, electrode design: multi-cylinder roller electrodes, max. treatment width: 200mm. An on-site inspection is possible.
For sale is a Styrofoam block press manufacturer Wemhöhner, the press is in good condition and can be viewed by appointment. I will be happy to answer any further questions you may have.
For sale is an EPS block mold, manufacturer Erlenbach, year of construction 2008, 5000 mm x1300 mm x1000 mm, vacuum system, The system ran very well until the end. The facility can be visited by prior appointment
M. No.: 43954 Equipment / Additional information: Vacuum: 20 mbar Motor Oil: Type SAE 30 Qt.: 6 Ltr.
M. No.: 070068681 Equipment / Additional information: Hz: 50/60 V250/300 m3/h P 100 hPa (0.1 bar)
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, Total height mm.5.340, Ø 2.200 mm, weight kg.1.550, inspection hatch on barrel, bottom discgarging pipe 200 mm.Ø at 950 mm from ground, total discharging dor cleaning purposes through 400 mm Ø pipe, loading hopper at 950 mm from ground, 15 kW drive, control panel, capacity: 5.000 kg ca, conditions: used
Year: 2011 - technically efficient, ready to work – after full service - WT 535B automatic rotary station - disc cutter: 250 mm - windows PC control - profile recognition system - for turning tools on and off as needed - extensive tool equipment
Year: 2006 - technically efficient, ready to work – after full service - handle function - copying template - pneumatic profile mounting - centering device
A maintenance-requiring Dremel 3D plastic printer is available. Filament diameter: 1.75mm, materials: PLA/ECO-ABS/PETG/Nylon, build dimensions X/Y/Z: 255mm/155mm/170mm, min. layer thickness: 0.05mm, max. extruder temperature: 280°C, device dimensions X/Y/Z: approx. 550mm/400mm/400mm, weight: approx. 20kg. On-site inspection is possible.
Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible.
Farsoon SS403P-H (Year of manufacture 2023) – Industrial 3D printer including peripherals, For sale is a Farsoon SS403P-H, year of construction 2023, with under 11,000 operating hours. The system is in a well-maintained, operational condition. The last maintenance was performed in 2024 and 2025through which technically proper operation is ensured., The offer includes a complete production setup including relevant peripheral devices and is thus ideal for direct deployment in an industrial manufacturing environment., ---------------------------------------------------------------, scope of delivery, - Farsoon SS403P-H 3D printing system, - Escape station (Powder removal / component uncovering), - Industrial cooler, - Nitrogen generator, - Accessories and operationally relevant components (upon agreement), ---------------------------------------------------------------, Technical specifi ...
STRAND PELLETIZER 250 mm., Fixed pitch, 4 kW motor, 4 poles, IE3 motor drive, Transmission belts, Speed variation via inverter, Electrical panel compliant with CE standards - 400 V, 50 Hz with, 2 x 16 Amp sockets, width 250 mm, Rotor with 12 micrometrically adjustable rotating blades, Counter-blade made in widia, Hardened pressure roller, diameter 60 mm, straignt knurling, Hardened drive roller, diameter 40 mm, straight knurling, Pneumatic piston for presser roller adjustment, Chrome plated parts in contact with the material, Stainless steel discharge, Limit switch with safety lock, Mounted on anti-vibration support with sound proof panels, installed power - used power in work: about 60-65% : 4,0 kw, availability: 70 working days ca, working width: 250 mm, conditions: new machine, type: strand pelletizer for extruders
Stratasys J750 DAP – Economic value through realistic anatomy simulation, The Stratasys J750 with Digital Anatomy Printer (DAP) Upgrade is not only a technological investment – it is a strategic tool for Cost reduction, process optimization and risk minimization in medical and medical-technical applications., ---------------------------------------------------------------, Your economic benefit, 1️⃣ Reduction of operation times, Patient-specific anatomical models enable more precise preoperative planning., → Shorter intervention times, → Lower operating costs, → Reduced complication risks, Already a few avoided operating minutes per procedure can significantly amortize the investment., ---------------------------------------------------------------, 2️⃣ Fewer revision and incorrect decisions, Reality-realistic tissue simulation allows testing of surgical strategies or i ...
A Sahm precision cross winder 260E is offered. Traverse width stroke: 300mm, winding speed max.: 500m/min, bobbin diameter: up to 320mm, bobbin volume max.: approx. 22.4dm³, titer range: tapes: approx. 150dtex - 3500dtex, monofilaments diameter: 0.15mm - 0.60mm. Inspection by appointment possible.
2 SAHM precision cross winders type 260 are offered. Year of manufacture 1985 and 1998. Each machine has 2x 96 positions 192 positions total, plus 10 additional reserve heads, total 202 positions. Traverse stroke: 13inch approx. 330mm. Mandrel diameter for sleeves: 3 1/4inch approx. 82.5mm. Inspection by appointment possible. The machines are not located in Europe.
The weber ultrasonic saphir digital station is used for ultrasonic welding. The system is sold with a machine table and workpiece holder as shown in the pictures. Frequency 35kHz, Power 1000W, 230V AC (Schuko plug), Sonotrode TR35Ti, Min force 30N, Max force 380N The touch panel has a small defect, but the use is not affected.
The weber ultrasonic saphir digital is used for automated inline ultrasonic welding. This device is sold without the automation line. Frequency 35kHz, Power 1000W, 230V AC, Sonotrode TR35Ti The machine was used for the production of about 90000 units.
We offer this used Weber Ultrasonics Saphir Digital Manual Station Ultrasonic Welding Machine, built in 2023. About 92500 units were produced with this machine. Sonotrode TR35Ti Frequency: 35kHz Power: 1000W 230V AC Displacement measuring system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or need more information, please feel free to send us a message or give us a call.
STRAND PELLETIZER 250 mm., Variable pitch, with synchronized pull off unit, 4 kW motor, 4 poles, IE3 motor drive, 1.1 kW motor on pull off unit, Transmission belts, Speed variation via inverter, Electrical panel compliant with CE standards - 400 V, 50 Hz with, 2 x 16 Amp sockets, width 250 mm, Rotor with 12 micrometrically adjustable rotating blades, Counter-blade made in widia, Hardened pressure roller, diameter 60 mm, straignt knurling, Hardened drive roller, diameter 40 mm, straight knurling, Pneumatic piston for presser roller adjustment, Chrome plated parts in contact with the material, Stainless steel discharge, Limit switch with safety lock, Mounted on anti-vibration support with sound proof panels, installed power - used power in work: about 60-65% : 5,1 kw, availability: 70 working days ca, working width: 250mm, conditions: new machine, type: strand pelletizer for extruders
