machines and plants for process engineering used for sale (7,544)

Heating power: 18.5 kW maximum temperature: 350 ° C maximum capacity: 15 ltr. 380 V / 60 Hz

Herding® Multicoater Unused New, 3 pieces available e.g. film coats of tablets During the spraying phase, a very fine dust is produced during the film coating of tablets, which is extracted from the fluidized layer into a filter device with a defined air flow. The dust is sticky and without the precoating material forming a protective layer on the filter, the surface would stick very quickly. The Multicoater is a pneumatically operated dosing device and is usually operated with inert gas. It consists of a template container including control and conveying technology and is filled via a loading opening in the housing cover. The dosage is done via an injector pressure pump with a flow rate of 1.3kg/min. The MultiCoater has an internal control system that automatically controls the flow of the fluidizing, conveying and rinsing sequence.

Dosing scale with precision spiral screw feeder in stainless steel version, with pre-container and weighing frame in frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with large loosening spiral in the trough, drive 0.47 kW via timing belt and Reduction gearbox, discharge pipe diameter: 50 mm.

Used pump for milk, made by HPM, model H 55 P. New 2002.

Used stainless steel coating pan made in Hungary by Vegyepszer. Drum volume 200 liters. Unit includes air fan. Drum dimentions diameter 1.1 m depth 45 cm.

All in one reactor . Material: Stainless steel 1.4571 Drive: 4 kW Volume container: 50 ltr. Volume casing: 10 ltr. Pressure inside: - 0.97 / + 3 bar Outside pressure: 5 bar Temperature: 180 ° C; Weight: approx. 2000 kg Length x width x height (mm): 2200 x 1620 x 2065 Machine in excellent condition!

Used semi-automatic batcher granules machine, type DP/3. Production - Italy. New 2005. Stainless steel.

System: Used decanter / centrifuge Manufacturer: Alfa Laval Model: full coat screw centrifuge Type: AVNX 616 B-31 . No.: 5006111 Year of construction: 1986 Drum diameter: 190/353 mm Maximum density: 1.8 kg / dm3 Max drum speed: 4000 rpm Panel: including, H. B. 2.00 x 0,80 m Net weight without motor: 1425 kg Other: documentation available

System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Höchstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Frequency converter: Yes Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.

Used pressure filter made by Sfoggiatech, model SEB 1/P3. Filtration area 1 m3. Engine power 1,7 kW.

Used filter press made by Seitz, type 40/30. PP plates with dimensions 40x40. 2 pieces available.

Used line to grind, capacity 300-600kg / h. (depending on the product) The line is equipped with: - Mill REKORD - Cyclone Filter - Centrifugal fan for air transport.

Used ball mill made by turkish company Remas. Capacity 34,000 liters. Mill inside the rubber, silicon spheres, 90kW engine. 10.68 mill Oroty rev. / Min. Dimensions: 3120mm diameter. length of 5380mm. Dost. 7 pcs.

Used roller mill made by SPOMAX Polska, typ RUD-11/8. New 2002. Depending on the crushed raw material yield is 100-2000 kg (mean 1000 kg). The mill has two pairs of milling rollers. 7.5 kW motor. Overall dimensions: height 2030 mm, 755x890 mm base. Weight 680 kg.

Used colloid mill with capacity hopper approx. 30 liters. Stainless steel construction.

Used pressure leave filter, made by Padovan, type G10. -filtration surface 10 m2 -filter surface for waste liquid 0,46 m2 -24 filter plates with 745 mm diameter for liquid -6 filter plates with 330 mm diameter for cake -maximal cake thickness 22 mm, volume 216 dm3 -total chamber volume 655 L -working pressure 6 bar -nominal capacity 20.000 L/h -installed power 7,5 kW -dozing pump -rotary motor 4 kW -overall diamesions: lenght 2350 mm, width 1700mm, height 2100 mm

Used rebuild KHD Humboldt Wedag model S3?01 decanter. New 1992. Cylinder made of hardened steel (it does not rust but not stainless) lenght of cylinder 1370 mm, cone lenght 110 mm. Screw made of steel also hardened. Drum speed 2200 rpm. Motor 30 kW with clutch dydrodynamic made by Voith (easy start). Lubrication by ump. New bearings casindgs, transmission belts, all bearings are new, seals. During the rebuild drum and zscrew ware balanced. Suport fram with antivibrators. Manual available in Polish. Capacity approx. 20000 L/H.

Used stainless steel fluid bed dryer made by Glatt model WST CD 30. New 1988. Pressure 2 bar. 15 KW ventilator, air heater and cyclones included. Unit still installed. Control Panel.

REWA 470 / 27 Product no.: RE-HU-2015-0801-1 Equipment: refurbished dewatering equipment Type: Chamber filter press 470/27 with high pressure piston diaphragm Abel Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 27 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 10.1 m ² Presses contents: approx. 135 dm3 PCB package length: 1600 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Pumps: Abel piston diaphragm high pressure pump Accessories: depending on the type and customer Extra services: On this complex guarantee months between 6-12. Condition: The system is in good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility or to buy? Contact  ...

REWA R35-2 Product no.: RE-HU-2015-0901-PEC2 System: eccentric screw pump Manufacturer: REWA Type: R35-2 Year: 2014 Flow rate: 8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 4 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber

System: eccentric screw pump Manufacturer: REWA Type: R20-2 Year: 2014 Flow rate: 0.8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 1.5 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber Condition: The pump has no hours of operation and is as good as new

KSB Wilo, Grundfos, Allweiler pumps in stock. Incl. VFD,. from 1KW to 37KW, 1m / h up to 350m / h designation, see list.

MSE 470/10 Product no.: RE-HU-2014-0412-1 Attachment: Chamber filter press, drip sealing used Usage area: Chamber filter press Design: page Holm led Year of construction: 2002 Filter plate format: 470 x 470 mm Number of plates: 10 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 3.3 m ² Presses contents: approx. 48 dm3 Filter pressure: 15 PSI Plate transport: manually Pumps: optional Buying or renting: Visit the facilities in consultation with us to work. You want to rent this facility or to buy? Contact us, we are available. There are two identical facilities are available.

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 125 Engine type: 1130-1190 Year of construction: 1992 Power: 125 m ³/h Speed: 1000 rpm KW: 2.7

Mobile double drum dryer with many setting possibilities. Can be used in a 20 ' container be fitted and used as mobile plant. Wolf heating unit WLE-S can be converted at any time also to gas operation 140KW, oil burner Elko Kloeckner, type EK 02. Fan unit with 12,000 m³/h, 5,5KW, 955 1/min drying temperature up to 220 ° C depending on the drying goods. With heavy dust separator and air filter. Air to air heat exchanger for indirect heating - no exhaust in the drying air!

Ladies and gentlemen, Below you will submit a non-binding offer for a used 50 tons arc furnace: Offer Arc Furnace we will send you our offer with technical data on a used standard system arc furnace 50 t All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of th ...

Twin-shaft mixer Product no.: RE-HU-2014-0907-SF4 System: Used twin-shaft mixer Coil height: 230 mm Shaft diameter: 75 mm Trough height: 2 x 265 mm, total 530 mm Trough length: 3540 mm : Dimensions 4200 mm B 650 mm, drive 660 mm Engine: 4 x SEW, 3 kW, with Handwheel Material: stainless steel case Intake: 850 x 560 mm

Attachment: eccentric screw pump used Manufacturer: Allweiler Series: AED 1E 4250 Year of construction: 2000 Working temp.: approx. 20 ° C Viscosity at tA: approx. 500 mpa.s Density at tA: approx. 1.0 kg / m³ Pressure in the pressure connection: 2-6 bar Speed: 62-310 1/min Flow rate: 30-180 m, m³/h Engine capacity: 45.0 kW

The blowers are fully incorporated into a soundproof cover with base frame, safety valve, check valve and mounting parts. The motor can be installed according to customer specifications. The stage will be overhauled on request.

System: Used trough screw conveyors Coil height: 280 mm Spiral distance: 290 mm Trough height: 325 mm Trough length: 5500 mm Width: 440 mm Overall length: 6700 mm Engine: Greifenberger 5,5 kW Other: Center bearing