blower unit DELTA BLOWER 5 - GM3S A info: t.buttierisampgroup almost new
Aerzen GMA 13.6 Rotary piston blower with soundproofing hood Engine power 30 kW Very good condition, directly from production!
Aerzener VM 9 R Delta Screw Screw Compressor with soundproofing hood Suction pressure: 1 bar Suction volume: 600m3/h Engine power: 55 kW Very good condition, directly from production!
The blower is general-outdated and in technically flawless state.
The blower is installed in a soundproofing hood with basic frame, safety valve, recop flap and attachments. The drive engine can be designed according to customer specifications. The compressor stage is completely outdated. You can also only purchase the GM 10 S level. If you have any questions, please call.
The blower is installed in a sound insulation hood with base frame, safety valve, check valve and attachmentparts. The drive motor can be designed according to customer specifications. The compressor stage is completely overhauled. You can also purchase only the GM 80 L level. If you have any questions, please call us.
The fan speed is refurbished, can be supplied as a complete unit.
The fan speeds are reconditioned, can be supplied as a complete unit, performance data according to customer specifications.
The fan is installed in a soundproofing hood completely, the stage is refurbished.
A generally overhauled rotary piston blower brand is offered: Aerzener machine factory Type: GM 4 S See pictures. All our overhauled blowers are equipped with new bearings and density elements. If you have any questions, please call.
The GM 50 L unit is unused. The unit can be set to your performance data. If you have any questions, please do not hesitate to contact us.
The fan speed is refurbished, can be offered as a complete unit.
The blowers are fully incorporated into a soundproof cover with base frame, safety valve, check valve and mounting parts. The motor can be installed according to customer specifications. The stage will be overhauled on request.
The blower stage has been overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call. You can also purchase the blower as a complete unit with: soundproofing hood, base frame, safety valve, check valve and add-on parts. The drive motor can be designed according to customer specifications. The compressor stage has been overhauled. You can also purchase only the GM 60 S level. If you have any questions, please do not hesitate to contact us.
The blower is sold overhauled. The photos show the blower before the overhaul. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.
The blower is sold in a completely overhauled way. The photos show the blower before the overhaul.
The fan speed is refurbished, can be supplied as a complete unit.
The blower is sold in a completely overhauled way. The photos show the blower before the overhaul.
The fan speed is refurbished, can be supplied as a complete unit.
The fan speed is refurbished, all wear parts are new, can be offered as a complete unit.
A generally overhauled rotary piston blower brand is offered: Aerzener machine factory type: GMA 12.4 See pictures. All our overhauled blowers are equipped with new bearings and density elements. If you have any questions, please call.
The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.
The blower is with side admittance completely with impulse.
A refurbished rotary piston blower brand is offered: Aerzener Maschinenfabrik Type: GMA 12.6 See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.
The blower is sold in a completely overhauled way. The photos show the blower before the overhaul.
The fan speeds are reconditioned, can be supplied as a complete unit.
The blower is sold in a completely overhauled way. The photos show the blower before the overhaul.
A generally overhauled blower type GMb 039 is offered.
A refurbished positive displacement blower is offered Brand: Aerzener Maschinenfabrik Type: GMB 039.0 See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.
The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.
Power: 22 m3/min., Delta P 320 = mbar, 30 kW, (10.6 kW at 1690 RPM)
The blower level is sold in a completely overhauled way.
The rotary piston blower is general-outdated. of the blowers is also to be had with impulse.
The rotary piston blower is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call us.
The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call us.
The picture shows the blower before the overhaul. All our blowers are sold with new bearings and sealing elements. Blower data: 2.04 m2/min 400mbar 2.3 kW
It offers a refurbished Aerzen screw compressor type: VM 310-2 or -3. All bearings and sealing elements have been renewed. The service can be adjusted by arrangement. This is the compressor stage.
AERZEN rotary blower GMB 14.8 - used, reconditioned - DESCRIPTION 3-bladed fan speed with integrated pulsation reduction Basic rack with integrated discharge silencer Tensioning device for the belt drive Pressure / vacuum valve Connection box with built-in non-return valve and flange for valve and starting discharge Drive motor (three phase motor) MANUFACTURER'S SPECIFICATIONS Manufacturer: Aerzen, Germany Type: GMB 14.8 YOM: 1976 TECHNICAL DATA Intake rate: 15,5 m ³/min Flow pressure: 0,73bar (max. 1,0 bar) Delta p: 730mbar Blower rev: 1.337rpm Motor: VEM 37kW 380Volts 50Hertz 1.460rpm CONDITION used, reconditioned, ready for operation SERVICE/RECONDITIONING New pulsation silencer box, new oil, new spray painting VISIT Please visit us at any time for an inspection. Test run is possible. REMARK Large stock of used machinery and equ ...
Stock number: UG6350 Unused screw compressor by Airpol (PL) model K15. Machine can reach output up to 120 m3/h with pressure up to 10 bar. Power supply 15 kW. Includes 500 l tank. Machine new 2021.
Side channel blower Capacity: 3.420 m3/h Vacuum: -270 mbar Operational press: 260 mbar Power: 7,5 kW
Positive displacement blower Roots blower Coperion K50 / M34 NEW Year of construction 01/2020 - brand new and unused ! >> NEW / FUNCTIONAL / READY FOR IMMEDIATE USE We hereby offer a positive displacement blower of the brand Coperion K50 (K50R5 VAC). The blower was taken over from a company dissolution and is in perfect condition. Dimensions: width 2700 mm x depth 1800 mm x height 2100 mm (transport on pallet possible - pallet height 15 cm) Specifications: Blower unit K50R5 VAC Blower stage BS50 _____ Suction connection (unit) NW DN 200 Pressure connection (unit) NW DN 200 _____ Drive type belt operation Constant speed operating mode 0pi2duh9 Operation Suction operation _____ Conveying medium air Standard density of the medium pN kg/Nm³ 1.2930 Specific heat capacity of the medium cp kJ/kg K 1.0050 _____ Installation height H m above sea level 435.0 ...
Side channel compressor 250 mbar, 5.3 cbm/min Side channel blower 250 mbar, 5.3 cbm/min
Radial high-pressure fan, radial blower, radial fan with frequency inverter unused Fan ELEKTROR Type: HRD7FU-105/20 Volume flow: 97 m3/min | 5800 m3/h Total pressure difference: 16 kPa Power: 20 kW 400 V with LENZE frequency inverter On and out: 160 mm Total dimensions: 1300 x 1000 x 1100 mm The fan comes from a bearing resolution and is unused !
2 pieces of hermetically encapsulated centrifugal fans. Mechanical seal with sealing water connection. Manufacturer FIMA Maschinenbau Type: RC4R U 125KBG GR360 MB160 Year of construction: 2004 Operating speed: 4398 rpm Volume flow: 0.35 m³/s (1260m³/h) Pressure increase: 175 mbar (17500 Pascal) Shaft power: 9.5 kW Maximum housing pressure: 1.5 bar Maximum medium temperature: 80°C Material medium contact parts Impeller / housing stainless steel 1.4462 Electric motor: Siemens 11 kW EFF Class 2. Voltage 400/690 Volt Dimensions: Suction nozzle: DN 150 Pressure nozzle: DN 150 Length: 1400 mm Width: 700 mm Height: 1000mm Weight: 400 kg 2x frequency converter Siemens Micromaster 430 galvanized sheet metal insulation still available. Including connecting pipes with elbow DN 150 and condensate drain. Also available Ball valves DN 150
As can be seen in the pictures, used well-preserved Vacuum Boost 8000 are sold. There are 3 total units with control available and 2 pieces replacement booster. The boosters are sold together or individually. If you have any questions, please feel free to contact us.
Radial blowers from Voith Howden. Flow volume: 202000 m³/h Pressure increase: 4800 Pa Speed: 960 rpm Shaft power: 421 KW Electric motor: 550 kW Total weight: approx. 12000 Kg Dimensions: width 3300 mm x length 6000 mm x height 4000 mm Housing ! divided horizontally
Two pieces of radial blowers Manufacturer: Kreisel Type: LRMSDE 900-Z/R 30-L1 Design: 2 opposite suction nozzles Speed: 1475 rpm Shaft power: 174.5 kW Required motor: 200kW Volume flow: 128,300m³/h Pressure booster: 3280Pa At medium density: 0.79 kg/m³ Maximum temperature of the medium: 160°C Total weight: 4100 kg No electric motor available !
1 piece high pressure radial blower Volume flow: 3500 m³/h Total pressure increase: 10095 Pa Density d. gef. Medium 1.2 kg/m³ Temp. of the gef. Medium 20 °C Total mass: 363 kg Engine: VEM Type: KPER 180 M2 Power: 22KW; 380/660V; 39.5/23A IP 55 Speed: 2935 rpm Mass: 165 Kg
1 piece high pressure radial blower Volume flow: 7000 m³ Total pressure increase: 10850 Pa. Speed: 2935rpm Temp. of the gef. Medium 20°C Shaft power 29.1 KW Total dimensions: 520kg Dimensions :L;B; H 1300x1350x1200mm Diameter impeller: 900mm Engine: VEM KPER 200 LX2 TWS Power: 37 KW; 380/660V; 67/38.5A IP 54 Speed: 2940 rpm Mass: 255 kg
There are only 1 piece left for sale Volume flow 750 m³/min (45000 m³/h) Pressure increase 5600 Pa; Shaft power 84.6 KW; Speed 1500 rpm with swirl control vibration damper and intake silencer. Various arches and cables are also available. The housings and impellers are in excellent condition.