Manufacturer:
(Category: 301)
BILLION HERCULES H2000 Series - 320 T Clamping force: 320 T - 3200 KN Injection unit: H 2000 Screw diameter: 75 mm Distance between columns: 610 x 610 mm Tray dimensions: 920 x 920 mm Min/max thickness of the mould: 330 - 680 mm Opening stroke: 660 mm Injected volume: 1259 cm3 Material pressure: 1587 bar Dimensions: 7.1x 2.1 x 2.6 m Weight: 14,000 kg
BILLION Hercule 140 T Injection Moulding Machine Injection group: H470 Clamping force: 140 T Screw diameter: 40 mm Injectable volume: 220 cm3 Injection pressure: 2100 bar L/D Ratio: 23.5 Distance between columns: 515 x 515 mm Distance between columns: 735 x 735 mm Min/max mold thickness: 240-480 mm Opening stroke: 500 mm Engine power: 18.5 KW Heating power: 9.60 KW Dimensions: 5.10 x 1.80 x 2.25 m Weight: 6.8 T
BILLION Dixit 900 Tons Clamping force: 900 T - 9000 KN Injection unit: H 6860 Screw diameter: 120 mm Passage between columns: 1025 x 1025 mm Tray dimensions: 1550 x 1550 mm Min/max thickness of the mould: 300 - 1200 mm Opening stroke: 1250 mm Injectable volume: 5938 cm3 Material pressure: 1155 bar Dimensions: 11.5 x 2.5 x 3 m Weight: 53,000 kg
Key data: 12000 , 11690 , 155
Injection molding machine SANDRETTO MEGA TES 1200 - 8 series Type: 17750-1200 Clamping force: 1200 T Screw diameter: 155 mm Injectable volume: 11,698 cm3 Injection pressure: 1520 bar L/D Ratio: 20 Column spacing: 1404 X 1404 mm Closing stroke: 1350mm Heating Zone: 6 Oil tank: 1900 liters Min/max mold thickness: 450-1600 mm Dimensions: 15.86 x 3.18 x 3.16 m Weight: 94 T
year 2009. injection volume 9 cm3. Immediate ex stock available
Ref. no.: 17540Hersteller: ARBURGYear of construction: 1994Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 270 X 270 mmMould height min.: 200 mmPlaten size (h x v): 405 X405 mmInjection unitScrew diameter: 25 mmInjection volume: 67 cm³Shot weight: 61 gInjection pressure: 2500 barMeasurements and weightDimensions: 3,3 X 1,5 X 2,0 mMachine weight: 2400 kg
Technical data Year of Make: 2007 Closing page Clamping force: 1300 t Opening distance/installation height max. : 2300 mm Max. spacing of the clamping plates: 4000 mm Tool installation height min./max. : 1000 - 1700 mm Clamping plate max. Height: 1910 mm Min. tool size: 1000 - 1700 mm Lights spar spacing: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Splash side Screw diameter: 135 mm Displacement: 8588 cc Core Cables AWS/DS: 1/1 Needle gate tire. : 1 Machine is delivered with Kuka robot and can be viewed in production.
2 x injection moulding machines EL - EXIS 200 S incl. Wittmann robot cell for removal and feeding ( No IML ) EL - EXIS 300 S incl. Wittmann robot cell for removal and stacking ( no IML )
Inv. Num. : 8937 Type: KM 65-180 CX Producer: Krauss Maffei Created: 2008 Parameters: Control System: MC5 2.0 Clamping force: 65 t Screw diameter: 25 mm Injection capacity: 74 cm³ Distance between stands: 420 x 420 mm Ejector stroke length: 150 mm Injection weight: 3700 kg
Inv. Num. : 8936 Type: KM 65-180 CX Producer: Krauss Maffei Created: 2006 Parameters: Clamping force: 65 t Screw diameter: 28 mm Injection capacity: 74 cm³ Distance between stands: 420 x 420 mm Ejector stroke length: 150 mm Injection weight: 3700 kg
Inv. Num. : 8935 Type: AX 80-380 Producer: Krauss Maffei Created: 2011 Parameters: Control System: MC5 4.5 Clamping force: 80 t Screw diameter: 30 mm
2 x Arburg 320 K 700-100 injection moulding machines 2001 and 2003
Arburg 320 C 500-170 (2014)Working hours : 44.124 hClamping force: 50 tScrew diameter : 25 mmShot weight : 75 gClamping force: 500 kNDistance between tie bars: 320 × 320 mmPlaten size (H × V): 446 × 446 mmMinimum mould height: 200 mmMaximum daylight opening: 550 mmEjector stroke: 125 mmScrew diameter: 30 mmMaximum shot volume: 85 cm³Maximum shot weight (PS): 77 gInjection pressure: 2000 barScrew speed max: 400 r/minNozzle stroke: 250 mmNozzle contact pressure: 40.6 kNHeating capacity: 9.4 kWPump drive power: 11 kWTotal installed power: approx. 20.5 kWL 3.4 m x W 1.4 m x H 2.0 mWeight :2 400 kgInjection UnitThermoplastics injection unit, 25 mm screw, high wear-resistant designStandard screw coupling with flat-ended geometryOpen nozzle, 25 mmNozzle tip for open nozzleHeater band for open nozzleClamping UnitMounting platen set, central diameter 125 mmCore pull 1, serial movement, holdin ...
Key data: 1600 mm, 228 , 40
Screw diameter: 40 mmStroke volume: 251 cm³Injection weight in polystyrene: 228 g/hpInjection pressure: 2,500 barClamping force: 160 tTool installation height min.: 300 mmOpening distance: 650 mmCONTROL: MC5Screen text: german / german Operating instructions: german / german Core pulls: 2incl. LRX100 robot integrated, x-550mm, y-1.200mm, z-1.500mm, c-90°, 2xGripper, 2xvacuumPump drive power: 22kWTotal connected load: 37.7 kWTotal weight: 8,200 kgDimensions L x W x H: 5.0 x 1.7 x 2.2 mPayment terms: 100 % before taking over the machine, net only
Key data: 650 mm, 140 , 35
Screw diameter: 35 mmDisplacement: 154 cm³Injection weight in polystyrene: 140 g/hpInjection pressure: 2,429 barClamping force: 65 tTool installation height min.: 250 mmOpening distance: 500 mmCONTROL: MC6Screen text: german / german Operating instructions: german / german Corecables: 1 Pump drive power: 15kWTotal connected load: 32.0 kWTotal weight: 3,900 kgDimensions L x W x H: 4.0 x 1.6 x 2.1 mPayment terms: 100% before taking over the machine, net only
Key data: 5500 mm, 1127 , 70
Screw diameter: 70 mmInjection weight in polystyrene: 1127 gClamping force: 5500 kNScrew diameter: 70 mmStroke volume: 1239 cm³Injection weight in polystyrene: 1127 g/hpInjection pressure: 1,990 barClamping force: 550 tLights Tie bar spacing H x V: 920 x 830 mmTool installation height - min.: 350 mmOpening distance: 750/1300 mmMicroprocessor control: KEBA 2880Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 4x Without material hopper / without water battery: -/- Pump drive power: 55+4 kWTotal connected load: 95.4 kWTotal weight: 21,000 kgTotal size: 7.5 x 2.5 x 2.6 mPayment terms: 100 % before taking over the machine, purely net
Key data: 3200 mm, 972 , 65
Screw diameter: 65 mmInjection weight in polystyrene: 972 gClamping force: 3200 kNScrew diameter: 65 mmStroke volume: 1068 cm³Injection weight in polystyrene: 972 g/hpInjection pressure: 2,120 barClamping force: 320 tLights Tie bar spacing H x V: 680 x 680 mmTool installation height - min.: 250 mmOpening distance: 640 mmMicroprocessor control: ABF0100-KEBA2985, 15" Screen text: german Operating instructions: german FHK interface for robots: Euromap 67 Core pull: -- Without material hopper / Without water battery: -/- Pump drive power: 45 kWTotal connected load: 78 kWTotal weight: 14,000 kgTotal size: 8.0 x 1.9 x 2.4 mPayment terms: 100 % before taking over the machine, net only
Key data: 3200 mm, 287 , 50
Screw diameter: 50 mmInjection weight in polystyrene: 287 gClamping force: 3200 kNScrew diameter: 35 or 50 mmStroke volume: 141 /314 cm³Injection weight in polystyrene: 154 / 287 g/hpInjection pressure: 2,500/1280 barClamping force: 320 tLights Tie bar spacing H x V: 720 x 720 mmTool installation height - min.: 300 mmOpening distance: 600 mmMicroprocessor control: Selogica direct Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- all-electric injection moulding machineTotal weight: 14,500 kgTotal size: 6.5 x 2.1 x 2.2 mPayment terms: 100 % before taking over the machine, net only
Key data: 2500 mm, 521 , 55
Screw diameter: 55 mmInjection weight in polystyrene: 521 gClamping force: 2500 kNScrew diameter: 55 mmStroke volume: 570 cm³Injection weight in polystyrene: 521 g/hpInjection pressure: 2,470 barClamping force: 250 tLights Tie bar spacing H x V: 630 x 630 mmTool installation height - min.: 300 mmOpening distance: 550 mmMicroprocessor control: Selogica direct Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 1 x Without material hopper / Without water battery: -/- all-electric injection moulding machineTotal weight: 14,500 kgTotal size: 6.7 x 2.1 x 2.3 mPayment terms: 100 % before taking over the machine, net only
Key data: 3500 mm, 810 , 60
Screw diameter: 60 mmInjection weight in polystyrene: 810 gClamping force: 3500 kNScrew diameter: 60 mmStroke volume: 891 cm³Injection weight in polystyrene: 810 g/hpInjection pressure: 2,420 barClamping force: 350 tLights Tie bar spacing H x V: 720 x 720 mmTool installation height - min.: 350 mmOpening distance: 730 mmMicroprocessor control: NC5 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 55 kWTotal connected load: 78.1 kWTotal weight: 17,300 kgTotal size: 7.4 x 2.0 x 2.4 mPayment terms: 100 % before taking over the machine, net only
Key data: 4200 mm, 1090 , 70
Screw diameter: 70 mmInjection weight in polystyrene: 1090 gClamping force: 4200 kNScrew diameter: 70 mmStroke volume: 1212 cm³Injection weight in polystyrene: 1090 g/hpInjection pressure: 1,877 barClamping force: 420 tLights Tie bar spacing H x V: 810 x 710 mmTool installation height - min.: 380 mmOpening distance: 710 mmMicroprocessor control: NC4 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 45 kWTotal connected load: 82.4 kWTotal weight: 20,000 kgTotal size: 7.9 x 2.3 x 2.5 mPayment terms: 100 % before taking over the machine, net only
Engel Victory 1350/220 Tech. 2005 holmenlos 1 conveyor belt; 1 core move Engel ES 500 H 200V / 110 HL - 2 F BJ 2001 holmenlos 2 aggregates ; 2 Core moves Engel Victory 500 / 120 Plus 2004 tie-barless handling he / usp ; 1 core move
Arburg 570C2000-800 FY2006 Golden Edition, 1 core hoist, 1 conveyor belt 33.400 Multilift SELECT 6kg Arburg 470C-2000-800 FY2005 No core features; 1 conveyor belt
Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible.
Key data: 3200 kN, 309 g/PS, 50 mm
Production Line Manufacturing Coffee Capsules NESPRESSO Consisting of the following components: Pos. 01) Injection moulds for capsules, manufacturer: FOSTAG AG 1.0 pcs tool with 16 cavities 1.0 pcs tool with 32 cavities Pos. 02) Two-component injection moulding machine, Bcobrsw Nriue Rvf Nyju Manufacturer: ARBURG, Type: 720A3200-800, Year of manufacture: 2017 The capsules are made as falling parts.
1 Geiger LR 16 removal robot Year of manufacture 2004 Travels: x=500 y=1000 z=2600 mm + 2 Geiger MidiLiner 3.0 removal robots Year of construction 2016 Travels: X-axis: 300 mm, Y-axis: 800 mm, Z-axis: 1300 mm The removal robots are in good condition, and immediately available!
Key data: 175 kN, 301 g/PS, 50 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: NETSTAL Type: SYNERGY S-1750-460 Year of Make: 2004 Clamping force: 175 tons Handlebar spacing 570 x 570 mm Installation height min./max.: 400 - 700 mm Opening travel: 450 mm Screws DN: 50 mm Max. displacement: 314 cm³ Moulded part weight in hp: 301 g 2 x Core Pull Interface Robot The machine is sold without the SEPRO robot pictured. The SEPRO robot in the pictures is not included.
This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information.
