Manufacturer:
(Category: 301)
Key data: 2000 kN, 359 g/PS, 50 mm
Arburg 570A-2000-800/170 Two-component hybrid injection moulding machine with sorting flap (247) Category: Injection moulding machines Brand: Arburg Number: 247 Availability: in stock Year of production: 2009 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 50//35 Injection weight [g]: 359//105 Injection pressure [bar]: 2000//1470 Clamping force [kN]: 2000 Gap spacing [mm]: 570 x 570 Plate size [mm]: 795 x 795 Minimum mould height [mm]: 400 Control Type: Selogica Tongue: English, German Working time [h]: 84609 Weight [kg]: 10.950 Dimensions [mm]: 6000 x 2000 Feed hopper: NO Air Valve: 1x
Key data: 14000 kN
Machine + Robot
Condition: used, with visible signs of use, was operational until placed in storage, control voltage: 24V, operating voltage: 230V, frequency: 50Hz, CO₂ pressure: 10bar, connected load: 500W, with CE marking. An on-site inspection is possible.
AB25V: Designation: Arburg 275 V 250-70 Year of Make: 2007 Clamping force: 250kN Screw diameter: 18mm Tiebar spacing: 275 x 275 FROM 50V: Designation: Arburg 375 V 500-100 Year of Make: 2008 Clamping force: 500kN Screw diameter: 15mm Tiebar spacing: 375 x 375
A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/800mm, opening stroke: 950mm, max. mold height: 970mm, oil capacity: 900l, connected load: 55kW, operating hours: approx. 82510h, weight: approx. 20.4t. The servo motor for the screw drive is defective. In addition, some smaller parts are missing. An on-site inspection is possible.
Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details.
Key data: 2700 kN, 29 g/PS
We offer this DESMA D 969.250 Z (S3) rubber processing machine in mint condition, built in 2021. Clamping force: 2700 kN Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Voltage: 400 V Frequency: 50 Hz Short circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Pump pressure: 265 bar Pump drive capacity: 72/39 l/min Pump drive current consumption: 32.0 A Pump drive power: 22 kW Nozzle application force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Hydraulic motor hours: 730 hours, Hydraulic pump (clamping force): 65 Hours, Operating System: active 3,360 hours Ideal for the production of: - Technical moulded rubber parts - Seals and O-rings - Automotive and industrial components Condition & Avai ...
B&A REF: WITTMANN BATTENFELD SmartPower TON: 300 SCREW DIAMETER: 65MM SHOT WEIGHT: 991 STROKE VOLUME: 1078CM3 INJECTION PRESSURE: 2070AR PLATEN SIZES: 1130 X 1155MM DBTB: 800 X 720MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 850MM MAX DAYLIGHT: 1250MM EJECTOR STROKE: 300MM CONTROLS: UNILOG B8 CORE PULLING: 2 AIR VALVES: 6 MOTOR: SERVO HYDRAULIC HEATING CAPACITY: 24.5KW ROBOT: WITTMANN WX 152 SERVO SCREW DRIVE: HYDRAULIC HOT RUNNER: 8 ZONE
B&A REF: 9340 TON: 130 SCREW DIAMETER: 40MM SHOT WEIGHT: 2015 STROKE VOLUME: 232CM3 INJECTION PRESSURE: 1710AR PLATEN SIZES: 620 X 665MM DBTB: 410 X 460MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 420MM MAX DAYLIGHT: 920MM EJECTOR STROKE: 150MM CONTROLS: COLUMBIA CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 9KW ROBOT INTERFACE: EUROMAP 67 ROBOT: WITTMANN BRIMUS 16 SCREW DRIVE: HYDRAULIC
B&A REF: 9341 TON: 550 SCREW DIAMETER: 90MM SHOT WEIGHT: 2365 STROKE VOLUME: 2600CM3 INJECTION PRESSURE: 1630AR PLATEN SIZES: 1310 X 1260MM DBTB: 900 X 800MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 900MM MAX DAYLIGHT: 1750MM EJECTOR STROKE: 300MM CONTROLS: COLUMBIA CORE PULLING: 2 AIR VALVES: 2 MOTOR: 55 HEATING CAPACITY: 34KW ROBOT: STYRAMA SERVO SCREW DRIVE: HYDRAULIC
B&A REF: 9343 TON: 110 SCREW DIAMETER: 35MM SHOT WEIGHT: 162 STROKE VOLUME: 178CM3 INJECTION PRESSURE: 1955AR PLATEN SIZES: 770 X 730MM DBTB: 480 X 440 MM MIN MOULD HEIGHT: 80MM MAX MOULD HEIGHT: 350MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 850MM EJECTOR STROKE: 125MM CONTROLS: TACTUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 15 SERVO HEATING CAPACITY: 7.5KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE MOTOR: HYDRAULIC
Vertical injection moulding machine manufactured in 2016. This Battenfeld CM 40 features a machine weight of 5200 kg and a working height of 1000 mm. The machine is equipped with a robust safety system, ensuring operational safety. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld CM 40 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 2 units available, this machine offers reliable performance for your production needs. If you are looking to get high-quality plastic processing capabilities, consider the Krauss Maffei 35-180 CX machine we have for sale. Contact us for further details.
Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: ap ...
Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible.
Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is possible.
ENGEL ES 80/50 HL injection moulding machine was built in 1996 in Austria by ENGEL Austria GmbH. The machine is designed for the efficient production of plastic components used both in everyday products and in many industrial sectors. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould. Once cooled, the material takes on the mould’s shape, resulting in precise, repeatable components of high quality. The ENGEL ES 80/50 HL features, among others, a 25 mm diameter screw and a precision mould clamping system with a clamping force of 50 tonnes. Day-to-day operation of the machine is facilitated by the intuitive ENGEL CC100 control system, which enables precise setting and monitoring of injection moulding process parameters. All this is complemented by an extremely rigid design that maintains ...
ENGEL ES 200/80 HL injection moulding machine was built in 1998 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components of various shapes, colours and applications. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. The result is precise and repeatable components of high quality. The ENGEL ES 200/80 HL features, among others, a 22 mm diameter screw and a precision mould clamping system with a clamping force of 80 tonnes. All injection moulding parameters are programmed via the intuitive ENGEL CC100 control system, which simplifies day-to-day operation of the machine. The injection moulding machine can also be equipped with production automation systems to increase the efficiency of the e ...
ENGEL VC 80/25 TECH injection moulding machine was built in 2004 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components used both in everyday products and in many industrial sectors. These components are produced using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould. Once cooled, the material takes on the mould’s shape, resulting in precise, repeatable components of high quality. The ENGEL VC 80/25 TECH is an excellent solution for both single-unit and series production. The machine is equipped, among others, with a 22 mm diameter screw and a precision mould clamping system with a clamping force of 25 tonnes. Day-to-day operation of the injection moulding machine is facilitated by the intuitive ENGEL CC100 control system, which enables precise setting and monitoring of in ...
BORCHE BS 120 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the mass production of technical components and everyday products made from plastics, in a variety of shapes and for various applications. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. The result is precise and repeatable components of high quality. The offered machine represents the Borche BS Plus series, designed for companies seeking high efficiency with reduced operating costs. Compared with the manufacturer’s standard models, it features an energy-saving servo drive and a more efficient pump, enabling more economical operation. The BORCHE BS 120 Plus also stands out with its 40 mm diamete ...
BORCHE BS 150 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the mass production of plastic parts used in both everyday products and in many industrial sectors. These parts are manufactured using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. As a result, precise and repeatable parts of high quality are produced. The offered machine belongs to the Borche BS Plus series, designed for companies seeking lower operating costs whilst maintaining high production efficiency. Compared with the manufacturer’s standard models, it is equipped with an energy-saving servo drive and a more efficient pump. The BORCHE BS 150 Plus also features, among others, a 45 mm diameter screw and a precise mould ...
KRAUSS MAFFEI KM 175-1000 C2 injection moulding machine was manufactured in 2002 in Germany by Krauss-Maffei Kunststofftechnik München Germany. The machine is designed for the mass production of plastic components of various shapes, colours and applications. The components are produced using the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This process enables the production of precise and repeatable components of high quality. The KRAUSS MAFFEI KM 175-1000 C2 is equipped, among others, with a 55 mm diameter screw and a precision mould clamping system with a clamping force of 175 tonnes. Thanks to additional core pulls, the machine can work with more advanced moulds for the production of parts with complex geometries. Day-to-day operation of the machine is fa ...
Manufacturer: ARBURG Model: ALLROUNDER Centex 470 C 1500 - 400 Year: 2006 Condition: Used Stock number: 9406 Clamping force: 150 t Screw diameter: 40 mm Injection capacity: 201 cc Maximum distance between mounting plates: 750 mm Injection Molding Stroke: 500 mm Distance between uprights (horizontal): 470 mm Distance between uprights (vertical): 470 mm
Manufacturer: Krauss Maffei Model No.: PrecisionMolding 160-750 Year: 2022 Condition: Used Stock number: 9405 Clamping force: 160 t Screw diameter: 50 mm Injection capacity: 393 cm³ Distance between uprights (horizontal): 570 mm Distance between uprights (vertical): 520 mm
Injection moulding machine Ferromatik K 200s /2F-493 BJ 1999
Injection moulding machine Ferromatik K 125s/2f BJ 1995
Injection Molding Machine Ferromatik 110s-2F BJ 1999
Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006
Injection moulding machine Ferromatik basetec 85-493-520 BJ 2009
Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008
