We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
new
x-travel: 600 mmy-travel: 300 mmz-travel: 440 mmtable-size: 1120 x 260 mmspindle taper ISO: 40 spindle turning speed range: 35 - 1600 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,36 tdimensions of the machine ca.: 1,65 x 1,32 x 1,65 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Tool milling machine from a training workshop in very good condition Manufacturer Klopp Korradi Year of construction 1991 Digital SK40 automatic feed in three axes Drilling pinole 50 mm Head rotatable Spindle speeds up to 45-1950 rpm x-310 mm y-180 mm z-310 mm Table 600 x 250 mm Feed infinitely variable 10 - 470 mm/min. Machine dimensions approx. 1.0 x 1.1 x 1.6 m Power connection 400Volt 10 Ampere 3-axe digital device AXEsta Counter-holding for horizontal milling Coolant device Chip tub Special price
used
x-travel: 300 mmy-travel: 200 mmz-travel: 350 mmtable surface area: 700 x 270 mmtaper in main spindle: ISO 40 turning speeds: 8: 150 - 1660 U/minturning speed range - horizontal: 8. 110 - 1230 U/minfeeds: 8: 25 - 285 mm/minweight: 900 kgquill stroke: 60 mmtotal power requirement: 3,7 kWrange L-W-H: 1,3 x 1,38 x 1,65 mCondition: ready for operation: Video available on our website.: CE signed: Electric 380 Volt: Cooloing pump: Digital readout 2 axis: x+y / Digidata KNT 7000 Fixed working table: Vertical milling head swivelling +quill adjustment: chip pan: Swiveling table: 600 x 250 mmSlotting head: Hub 80 mmUniversal tool milling machine with 2 axis digital display and swivelingvertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid trverse in all three directions. Machine from a repair shop.The digital display shows 2 axes because the t ...
used
• Table dimensions 460 mm x 800 mm • X-axis travel 500 mm • Spindle holder ISO 40 • Speed range (18) 50 - 2,500 rpm • Motor power main drive 3.75 / 4.4 kW
used
Travel: X, Y, Z 595mm x 400 mm x 450 mm Speed range from 30 - 1,800 rpm for horizontal and vertical Milling head to turn to the right and left with quill 75 mm Tool holder SK 40 Machine number 80003 Accessories: 3-axis digital display Heidenhain
used
Description: Universal tool milling machine - Digital display - horizontally milling device - Coolant system - Vise - Operation manual x-travel 600 mm y-travel 410 mm z-travel 200 mm Speed range - horizontal 30 - 1280 rpm Speed range - vertical 50 - 2150 rpm Head swivels +/- 90° Spindle holder ISO SK40 Table surface 1000 x 315 mm Total power requirement 3.2 kW Machine weight approx. 1.44 t Space requirement approx. 1.6 x 1.7 x 2.1 mweight approx.: 1,450 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,700 x 2,100 mm
used
x-travel: 400 mmy-travel: 320 mmz-travel: 400 mmControl: Heidenhain TNC 426/430 tool taper: SK 40 spindle turning speed range: 5000 U/mintotal power requirement: 5,5 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,5 x 2,0 x 2,0 m1 used Universal tool milling machineMake KUNZMANNType WF 4 CNCBuilt in 2002with Heidenhain TNC 426/430Operating hours:Control on: 39893 hMachine on: 36335 hProgram run: 5705 hSpindle running time: 8287 hAutomatic tool suit, drilling quillMilling head swivels +/- 90°(without vice)A viewing is possible at any time by arrangement.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Table clamping area: 350 x 700 mm x-path: 500 mm y-way: 320 mm z-way: 400 mm Spindle holder: SK 40 Spindle speeds: 30 - 2500 rpm Operating voltage: 380 V Total power requirement: 2.2 kW Space requirement: 1500 x 1500 x 1800 mm Weight: approx. 1700 kg
used
x-travel: 650 mmy-travel: 500 mmz-travel: 450 mmtable surface area: 1000 x 600 mmspindle taper: SK 40 spindle turning speed range: 5 - 6500 U/minquill stroke: 60 mmvertical head swivelling: +/- 90 table load: max. 400 kgfeeds longditudinal/cross/vertical: 0 - 4000 mm/minrapid traverse: 25 / 25 / 20 m/mindistance table / vertical spindle: 100 / 550 mmdistance table/horizontal spindle: 270 / 720 mmno. of tools in magazin: 20 tool diameter: 95 mmwotkpiece diameter with 2 vacant positions: 135 mmtool length - max.: 300 mmweight of tools max.: 7 kgcontrol: HEIDENHAIN, iTNC 530 spindle power: 13 kWtotal power requirement: 20 kVAweight of the machine ca.: 5,5 tdimensions of machine L x W x H: 3,45 x 2,38 x 2,25 mAccessories: vertical head with quill retraction and hydr. tool clamping, solid table, electron. hand wheel, probe HEIDENHAIN TS 640, coolantThe data for this ad ...
used
x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHeidenhain TNC 310 cnc controlelectronical hand wheelcoolant deviceTechnische Daten:Längsweg (X-Achse) / X-travel longitudinal 600 mmQuerweg (Y-Achse) / Y-travel cross 400 mmSenkrechtweg (Z-Achse) / Z-travel vertical 400 mmWerkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-3700 UpMVorschub / feed 0-2000 mm/min.Eilgang längs + quer / rapid feed x/y 5 m/min.Eilgang senkrecht / rapid feed z 4 m/min.Antriebsleistung gesamt / drice capacity 7 kWGewicht ca. / weight ca. 2000 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with Mo ...
used
Milling machine MACMOM M 100, year of construction 1970. Without table. At call.
used
x-travel: 290 mmy-travel: 170 mmz-travel: 310 mmtable surface area: 600 x 215 mmspindle taper: SK 40 spindle turning speed range: 50 - 2500 U/minfeeds: 9 - 450 mm/minquill stroke: 70 mmtotal power requirement: 1,8 kWweight of the machine ca.: 860 kgdimensions of machine L x W x H: 1,06 x 1,05 x 1,33 mAccessories: vertical head with quill retraction, solid table, counter bearing, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 400 mmy-travel: 250 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHeidenhain TNC 124 controlquillelectronical hand wheelcoolant deviceTechnische Daten:Längsweg (X-Achse) / X-travel longitudinal 400 mmQuerweg (Y-Achse) / Y-travel cross 250 mmSenkrechtweg (Z-Achse) / Z-travel vertical 400 mmTischaufspannfläche / table clamping area 600 x 320 mmWerkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpMVorschub x,y,z / feed x,y,z 10,10,8 m/min.Antriebsleistung gesamt / drice capacity 6,5 kWGewicht ca. / weight ca. 1200 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solu ...
used
Universal Tool Milling Machine Make: MAHO Model: MH 1000 2x available! x-travel 1000 mm Tool holder SK 40 Digital. Head swivel +/- . Table tilt and swivel +/- . Quill stroke . - 3-axis digital display - Universal table 1,250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. Quill feeds 0.02/0.03/0.05/0.08/0.12/0.20 mm/rpm - Central lubrication, manually operated The machine is open to the public. Ready for immediate use Free loading, transport no problem. Financing possible at favourable conditions! If you have any questions, just write or call.
used
Specifications: Workspace X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working spindle Tool holder: ISO 40 Auto. Feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 1/min, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Rigid table: 700 x 350 mm, 5 T-slots Rigid table: max. load capacity of 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Dimensions: 3200 x 4100 mm, height 1920 mm Equipment: - CNC control - Rigid table - Milling head swivels +/- 90° - Hydr. Clamping device - Coolant device - Emergency stop push button
used
Description: serial number: 53183 control: PHILIPS ,432 working hours: approx. 54064 hrs.  , travels: X-axis: 500 mm Y-axis: 400 mm Z-axis: 350 mm quill stroke: 50 mm feed ,rate: 1 - 4000 mm/min. turning speed range rpm: 20 – 5000 rpm rapid traverse: X-axis: 6m/min. Y-axis: 5 m/min. Z-axis: 6 m/min table dimensions: 350 x 660 mm tool taper: ISO40/DIN 69871 total power requirement: 10 kW milling table swivable: table rotation on B axis - table tilt by -30° to +30°  , attention: main drive non functional! z-motion: 350 mm, Read off operating hours: 54,064 h, x-motion: 500 mm, y-motion: 400 mm, control: PHILIPS 432, table surface area l x w : 350 x 660 mm, tool taper: ISO40/DIN 69871, turning speed range: 20 – 5000 rpm, feed range: 1 - 4000 mm/min, rapid motion: 5 - 6 m/min, weight approx.: 2,100 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 2,200 x 1, ...
used
Specifications: Tool holder: SK 40 Travel (X/Y/Z): 500 / 350 / 380 mm Speed range: 63 - 3700 1/min Feeds (X/Y/Z): 0.2 - 2.8 / 0.1 - 1.9 / 0.1 - 1.9 mm/rev Motor power: 8 kVA Dimensions (WxDxH), approx.: 1400 x 2000 x 1850 mm Equipment: - 3-axis digital display Heidenhain - Spindle protection - Hydr. Clamping device - Chip pan - Emergency stop push button
used
Specifications: Tool holder: SK 40 Travel X/Y/Z: 500 / 350 / 380 mm Speed range: 63 - 3700 1/min Spindle stroke: 100 mm Feeds X/Y/Z: 0.2 - 3.8 / 0.1 - 1.9 / 0.1 - 1.9 mm/rev Table size: 800 x 360 mm Motor power: 8 kVA Dimensions (WxDxH), approx.: 1370 x 1900 x 1860 mm Equipment: - 3-axis digital display Heidenhain - Spindle protection - Chip pan - Coolant device - Emergency stop push button
used
Specifications: longitudinal X-axis: 500 mm Vertical Y-axis: 350 mm transverse Z-axis: 380 mm Speed range: 63 - 3700 1/min Gears: 2 Tool holder: SK 40 Quill stroke vertical: 50 mm Feed in X, Y, Z axis: 0.2 - 3.8 / 0.1 - 1.9 / 0.1 - 1.9 - 1.9 mm/rev Equipment: -Digital - Rigid table - Large Chip Tray - Machine lamp - Coolant device
used
Maho MH 600 Universal Milling Machine Specification Manufacturer Maho Type MH600 Year. Unb. Axis displacement X-axis 400 mm Y-axis 210 mm Z-axis 300 mm Main spindle speed 20 - 4000 rpm Tool holder ISO-40 Extras Vertical head with pinole Various tool holders Universal table Digital display 2-axis Machine documentation Coolant set.
Description: With HEIDENHAIN TNC 121 path control, linear path control, spindle speed range 0 to 2000 rpm, feed speeds 0.02 to 0.2 mm, with rotary swivel table, see photos for detailsweight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 1,800 x 2,300 mm
used
x-travel: 700 mmy-travel: 350 mmz-travel: 450 mmtable surface area: 940 x 510 mmspindle taper: SK 40 spindle turning speed range: 32 - 1600 U/minfeed - longitudinal/cross: 8 - 400 mm/minfeeds vertical: 4 - 200 mm/mintotal power requirement: 4,5 kWweight of the machine ca.: tdimensions of machine L x W x H: 1,85 x 1,62 x 1,83 mAccessories: vertical head with quill retraction, univ. table, counter bearing, hydr. vice, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Specifications: Travel X/Y/Z: 400 x 400 x 375 mm Max. clamping area: 350 x 800 mm Speed range: (12) 50 - 2240 1/min Feed, infinitely variable: 1 - 630 mm/min Rapid traverse, max.: 1.4 m/min Total connected load: 4.7 kW Dimensions (LxWxH), approx.: 1300 x 1215 x 1700 mm Weight, approx.: 1250 kg Equipment: - Rigid angle table - Coolant device - Machine lamp
used
Article number: 07-07-171 Manufacturer: Mikron Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1700x1800x1800mm Weight: approx. 1500kg Digital display: 3-axis active digital display Heidenhain Travel: X-axis: approx. 500mm Y-axis: approx. 500mm Z-axis: approx. 380mm Table clamping surface: approx. 700x500mm Spindle: Speed range: approx. 50-2240 rpm Tool holder: ISO 40 Drive power: approx. 3.5kW Feeds & rapid traverses: in all 3 axes Feed range: approx. 1-630mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment Angle milling head with drill quill Coolant device Complete documentation Various tension wrenches Work light Various tool holders Other accessories on request Price and other technical data on re ...
used
x-travel: 500 mmy-travel: 500 mmz-travel: 380 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mmechanical handwheelsdigital read-outTechnische Daten / technical details:X-Weg längs / X-travel longitudinal 500 mmY-Weg quer / Y-travel cross 500 mmZ-Weg senkrecht / Z-travel vertical 380 mmDrehzahlbereich 12-stufig / spindle speed 12-steps 50-2240 UpM /rpmVorschub / infeed 1-750 mm/minSpindelaufnahme / spindle taper SK40 Tischgröße / table size 800x445 mmAntriebsleistung / drive capacity 7 kWGewicht der Maschine / weight 1650 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
x-travel: 1050 mmy-travel: 600 mmz-travel: 600 mmtable-size: 1200 x 600 mmtool adaptor: SK 40 turning speed range: 12000 U/minpower requirement: 40 kWControl: Sinumerik Steuerung 828D rapid traverse Z-axis: 30000 mm/minrapid traverse X- and Y-axis: 30000 mm/minworkpiece weight: 800 kgno. of tools in the magazine: 30 Stückdimensions: 4319 x 2286 x 2928 mmweight of the machine ca.: 7000 kg immediately available from stock- Siemens Sinumerik control 828D with 15.6 inch touch display- Difficult execution- High productivity- High reliability- Heavily ribbed, torsion-free machine base- Profile rail with revolving rollers on all axes for high loads- High torque servo drives, direct to the ball screw in all three axes- Precision-ground, preloaded, heavy-duty ball screw (Ø 40mm x P16 x C3) for high rapid traverse speeds in all axes- Telescopic guideway cover on all three axes- Main spindle SK40 ...
used
Pear 1FC4 Tool Milling Machine Manafacture: PEAR Model No.: 1FC4 X-axis (longitudinal): 200 mm Y-axis (transverse): 300 mm Z-axis (vertical): 155 mm Ratio: 1:1 Table dimensions (mm x mm): 600x400 Length x width x height: 1300 × 1300 × 2300 mm Collet bore mm: 4,6,8,10,12 Spindle speed: up to 12,000 rpm Distance between table and mandrel: 530 mm Engine hp: 0.75 RPM: 700-4400 Weight: approx. 1800 kg More items - new and used - can be found in our shop! International shipping costs on request!
used
Description: Machine number: 25/62/621 Spindle speeds: 60 - 1820 rpm Table dimensions: 600 x 210 mm With 4 grooves Travel distances: X: approx. 400 mm Y: approx. 300 mm Z: approx. 300 mm The machine is equipped with a two-axis digital readout from the manufacturer HEIDENHAIN Feed rate: 10 - 196 mm/min Incl. various machine accessories such as collets, holders and moreweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,000 x 1,700 mm
used
3-jaw-chuck diameter: 240 mmweight of the machine ca.: tfor table usage: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Specifications: Tool holder: SK 40 Travel X/Y/Z: 620 / 420 / 400 mm Speed range: 40 - 2200 1/min Table size: 800 x 380 mm Motor power: 4 kW Dimensions (WxDxH), approx.: 1780 x 1600 x 2130 mm
used
x-travel: 850 mmy-travel: 600 mmz-travel: 500 mmtable surface area: 1200 x 550 mmspindle taper: SK 40 control: HEIDENHAIN, TNC 121 spindle turning speed range: 36 - 1800 U/minquill stroke: 120 mmfeeds: 5 - 2000 mm/minrapid traverse longitudinal: 4 m/minrapid traverse vertical: 2 m/minmilling head -swivable +/-: 90 °table rotating: 360 °total power requirement: 12 kWweight of the machine ca.: 5 tdimensions of machine L x W x H: 2,80 x 2,0 x 2,61 mAccessories: vertical head with hydr. tool clamping and quill retraction, univ. table, various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Serial number 54table surface area l x w : 1700x400 mm, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 3,100 x 1,200 x 2,100 mm
used
Description: Includes machine vice, jaw width ,130 mm z-motion: 400 mm, x-motion: 560 mm, y-motion: 320 mm, table surface area l x w : 950x450 mm, tool taper: SK 40, turning speed range: 25 bis 2000 rpm, weight approx.: 1,800 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,500 x 1,780 mm
used
x-travel: 560 mmy-travel: 320 mmz-travel: 400 mmspindle taper ISO: 40 spindle turning speed range: 20 - 2000 U/mintable-size: 950 x 450 mmtotal power requirement: 2,8 kWweight of the machine ca.: 1,65 tdimensions of the machine ca.: 1,48x1,15x1,78 mThe machine comes from a training company and was maintained more than needed.The general condition is very good, all functions have been checked.Accesories:Ball screws for X, Y and Z axesVertical milling head with drawbarfixed box table 950 x 450 mmCoolant system complete with pump and fittingsProtective bellows on the vertical stand guide, with stainless steelslat coverBellows for transverse spindleCounterholder block for horizontal millingPull-in rod for horizontal milling spindle, built-in, with side actuationControl panel with emergency stop switch, swivellingDrawbar M 16, for DIN toolsCentral lubrication with interval controlChip collect ...
used
Control: Heidenhain 355 x-travel: 850 mmy-travel: 550 mmz-travel: 450 mmtool taper: SK50 hydraulic vise: documentation: weight of the machine ca.: 5,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Tool holder: SK 40 Spindle speed: 315 - 2000 rpm Table dimensions: 700 x 300 mm With 6 grooves and an attached machine vice Jaw width: 125 mm Travel distances: X: approx. 400 mm Y: approx. 300 mm Z: approx. 300 mm The machine is equipped with a three-axis digital displayweight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,500 x 2,000 mm
used
Milling machine, universal milling machine, tool milling machine -Clamping table: 300 x 800 mm -X/Y/Z 500/285/H430 mm -Spindle mount: SK40 -Speeds: from 40 to 2000 rpm -Power supply: 8-400mm/min - Rapid traverse: 600 mm/min -Cooling unit -Dimensions: 1430/1200/H2000 mm -Weight: 1594 kg
used
x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmspindle taper ISO: 40 quill stroke: 100 mmspindle turning speed range: 40 - 2000 U/minvoltage: 380 VTable dimensions: 800 x 400 mmweight: 1,9 ttotal power requirement: 3,0 kWdimensions of the machine ca.: 1,90 x 1,80 x 1,90 mdigital readout, 3-axis: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CNC tool milling machine TOS Žebrák Manufacturer: Intos Žebrák Type: FNG 50 CNC E Year of construction 2001 Control system: Heidenhain TNC 426 Spindle taper: ISO40 (SK40) Spindle speed: 0-3150 rpm Axle travel: X-700mm Y-500mm Z-500mm Machine weight:2550 kg Rotatable head: -90° ~ +90° Accessories: Documentation Riding bike Cooling Tool holder see photo
used
TOS-OSO FNK 2R - Tool milling machine Description- Heidenhain PT 855 position indicator - Infinitely variable speed adjustment - pneumatic tool clamp - Coolant device - Task lighting -Vice - incl. instruction manual & documents - Year of construction 2006 Specification - Table dimensions: 250 x 1100 mm - T-slots number x spacing: 4x 50 mm - Middle groove width: 14 mm H8 - Width of additional grooves: 14 mm - Max. permissible table load: 200 kg - Manual table work stroke lengthwise/crosswise/vertically: 840 / 376 / 460 mm - Motorized table work stroke longitudinal/transverse/vertical: 820 / 355 / 440 mm - Number of feed stages: infinitely variable - Feed range long/cross: 28 - 630 mm/min - Feed range vertical (reduction 1:3.3): 8.5 - 196 mm/min - Rapid feed longitudinal/transverse: 1500 mm/min - Rapid feed vertical (reduction 1:3.3): 450 mm/min - Distance from sp ...
new
Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling (without d ...
used
Specifications: - Table size 950 x 450 mm - Working range of the axes - X (longitudinal) 560 mm - Y (transverse) 320 mm - Z (vertical) 400 mm - distance milling spindle – angle table 510 mm - Tool holder SK 40 - Working spindle speeds adjustable in 18 stages 25 - 2000 rpm - Drilling spindle stroke 100 mm - Feed speed of the axes up to 1200 mm/min - Rapid traverses - Drive 400 V / 3 kW - Space requirement approx. W 1200 x H 1650 x D 1000 mm - Weight approx. 1700 kg - with : - 3 A. – Digital display - Coolant device - fixed angle table
used
Max. longitudinal movement of the table: 400 mm Z-axis stroke: 200 mm Digital display of travel paths Tool holder: SK 40 Weight: approx. 1000 kg
used
Description: Speed range: 65 - 2000 rpm With accessories as shown in the pictures Table dimensions: 630 x 200 mmweight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 1,250 x 1,000 x 1,460 mm