screen printing machine used for sale

1 shot blasting machine for paving stones make DISA type BT 125-188 = - Year of manufacture 2000, Beam hours 229, Operating hours 3605 - Permissible document width 12501 mm, permissible. Passage height 500 mm, flow speed 2-10 m/min (infinitely adjustable via frequency converter), belt conveyor center distance 11.7 m, permissible load of the belt conveyor 1000 kg/lm, extracting air volume approx. 125 m³7min, blast wheel diameter 380 mm, blast wheel speed (infinitely adjustable via frequency converter)1800-2800 ulmin, Abrasive recommended gr. S 280; S330, Steel medium requirement for initial replenishment approx. 300 kg, incl. ventilation system

Siemens Vertix 3D built 2010, refurbished 2019 The offer includes the following components: 3D ceiling stand with integrated cassette holder for ENT recording Grid wall 3D hydraulic multixtable Polydoros LX 30/50 Generator with touchscreen control panel Dose area productmeasuring device Agfa CR 85X Memory Film Scanner Transportation €860.00 Installation €2500.00 Optional: Full body grid wall AGFA CR Easylift, new X-ray tube, C-bow Ziehm Vista 6 months warranty When ordering by 01.03.2020 10% discount

Rilecart B-599 Automatic Wire Binding Machine (2004) The machine is in working condition and available for inspection upon request. This Rilecart B-599 has been running reliably without any issues. It has been well maintained and upgraded with several valuable features: Safety light curtains installed Pneumatic pressure adjustment for the carremata Modified wire unwinding system for improved handling Key Features: Year: 2004 Works with spooled double loop wire Compatible with both 3:1" and 2:1" pitch wires (from 1/4" to 1-1/4") Binding size: min. 100 x 80 mm, max. 450 x 600 mm Dedicated tool sets required per wire diameter Productivity: up to 4000 pieces/hour (actual output depends on product type and production setup) Skip-binding function (up to 5 gaps) Dual wire unwinder system for minimal changeover time Optional: Hanger feeder with integrated former

CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...

CNC CONTROL: MSD 501 II, FANUC FEATURES: DIAMETER ADMITTED ON THE BED, MM 680 MAXIMUM TURNING DIAMETER 440 MM N1 MAXIMUM TREATMENT DIAMETER N2 322 MM MAXIMUM TURNING LENGTH, MM 471 THE STANDARD MACHINING DIAMETER MM170 MAIN SPINDLE: STEP PANEL 45 MM COUNTER SPINDLE: HOLE PITCH LINE 43 MM TURRET 1: POSITION N12 ALL MOTORIZED TOWER 2: POSITION N12 ALL MOTORIZED

Used pharmaceutical machinery set. Set consists of: 1. Used EMPAK EA-1 labeling machine for automatic application of self-adhesive labels to all types of cylindrical packaging. Technical specifications: Maximum label dimensions: Length limited by package size Width: up to 120mm Label spool dimensions: Inner diameter: 40mm Outer diameter: up to 300mm Maximum throughput: Up to 6000 packages/hour Package diameter: up to 80mm Power supply voltage: 3N~50Hz 220/380V TN-S Overall dimensions: 1500x700x900 mm Weight: 130kg. 2. Used Empak TZZ capping machine/sealer. 3. Used Mewes & Goetzl drive-on scale, model: IT9000E, capacity up to 1000 kg. New: 2008

Spiral kneader Boku SK 240 A Basic overhaul basic refurbished spiral kneader Boku type SP 240 A with digital Steuerung.Es are 2 boilers in stainless steel with trolley. The kneader is suitable for a maximum of 240 kg of dough or for a maximum of 150 kg of flour.The machine has 2 speeds (slow and fast) and 2 Mixing time zones. Optionally, you can get the machine with a tipper and up to 4 boilers. Type: SK 240 AS CS for maximum 240kg of dough or for max. 150 kg flour 2 automatic timers 2 courses slow and fast Stainless steel spiral with 2 stainless steel boilers optional lye with up to 4 boilers Machine is overhauled and repainted

Universal and variable X-ray system. Mobile C-bow with 80 kW power iruund compact design. Particularly suitable for vascular diagnosis and surgery, cardiology, neurology, orthopedics, etc. Very good image quality through CCD Camera, image postprocessing, DICOM etc.

Kemper Langwirker-I-L

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaTurning diameter500 mmSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...

Production of candies

DAVI MCA 1513 4-roll plate rolling machine was built in 2023 in Italy by Promau S.r.l.. This highly efficient machine is the perfect choice for precision rolling of cylindrical, elliptical and conical forms. Sheet metal with a maximum thickness of 6,5 mm is machined fully automatically by four rollers, which are driven by planetary gears. In turn, the advanced control system allows, among others, the generation of a full programme from CAD files and an offline performance test. The offered DAVI MCA 4-roll plate bending machine is a guarantee of achieving repeatable parts of the highest quality. Technical specifications of the DAVI MCA 1513 plate rolling machine - number of rollers: 4 - maximum sheet metal thickness (mild steel, yield point 260 MPa): 6,5 mm - maximum sheet metal length: 1500 mm - control system: DAVI - motor power: 5.5 HP - power supply of the MCA 1513 machine: 4 ...

NEGRI BOSSI - SACMI 1300 Ton HIGH TONNAGE 2014 Model BI-POWER VH1300 /12100 120mm Screw Calculated Injection Volume 7351 cm3 Shot Weight 6689 Grams Space between HxV Tie Bars 1400 x 1200 ASK FOR VIDEOS

Machine will be complete refurbished with new parts width: 1200 mm PLC: Siemens S5 Diameter: 2-10 mm Pull out unit: MVL5

Teigabwieger Trima TA dough divider -with disused belt -1 Piston engine -with Siemens Touchpanle control -Weight range of 250- 2800 grams -Power of 650- 1500 pieces / hour -Stainless steel hopper -can be used on wheels

Longitudinal Splicer Manufactured by KUPER Model: FL/I-1000 - FL/INNOVATION

Longitudinal Splicer Manufactured by FISHER+RÜCKLE

Manufacturer: Handtmann Type: 34-2 Turning gear HANDTMANN 34-2 for Handtmann VF 10 , 12, 16, 18 , 20 Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

GLUE APPLICATOR Manufactured by FISHER+RÜCKLE Model: Gluemate

Manufacturer: Handtmann Type: 35-1 Turning gear HANDTMANN 35-1 for Handtmann VF 10 , 12, 16, 18 , 20 Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Gluing and Milling Line Manufactured by FISHER+RÜCKLE Model: EFA-28 Cross-feed Splicer Manufactured by FISHER+RÜCKLE Model: FL-728

Working Length: 3300 mm

Longitudinal Splicer Manufactured by Kuper Model: FL/Rapid

Properties: Used labeling machine with labeling system Very stable design Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Technical data: Manufacturer: SRD Type: Stano/- Alone-Line Device: Valentin SPE 106/12 Semi-automatic labeling system for image and sound carrier See user manual, schematic and pneumatic diagram Changes and errors in the technical data as well as intermediate sale reservations Roller track The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimizing the internal process. During transport, the roller conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line before or between production and mach ...

- Year of construction: 1996 - Semi-automatic - Zalkin head with 4 wheels: 2x thread rolls - 2x safety ring - For closures Ø 28 mm

Working Length: 3100 or 4100

Intact Vacuum skin packer Model: RM571 Serial: 8215 Stainless vacuum skin packer, chamber dimensions 700mm x 500mm x 110mm, adjustable timer controls, various moulds, 3Ph

with vertical matrix connector Max. work-piece diameter: 140 mm Max. diameter of upset flange: 180 mm Nominal force of upset slide: 12500 kN Force on clamping slide with dies closed: 12500 kN Stroke of: -Upset slide: 460 mm -Upset slide after closing of dies: 310 mm Number of continuous slide strokes per minute: at least 32 Electric motor power: 75 kW Machine dimensions: -Length: 8035 mm -Width: 4800 mm -Height: 3575 mm Machine weight: 140 tons

KIMLA BPF 1530 CNC router was built in 2014 in Poland by POLCOM Przemysław Kimla. The machine, dedicated to both small and medium-sized businesses, is the perfect choice for precision machining of a wide range of materials. All machining processes, i.e. milling, cutting and engraving, are performed on a large vacuum table by a powerful high-speed spindle. X,Y,Z axes are, in turn, driven by reliable digital servo drives that provide the appropriate acceleration and speed in each direction. The BPF 1530 CNC milling machine is offered with an extensive range of equipment, consisting of, among others, a BECKER vacuum pump and a tool correction sensor. The machine has undergone regular maintenance and servicing. During the last service in the second half of 2024, the vanes in the vacuum pump were replaced. It is also possible to purchase an additional new spindle at a net price of 2250 EU ...

Mantle Packaging Stainless manual tray sealer, twin tray operation, temperature and timer controls, tray dimensions 270mm x 280mm, 1Ph

Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine

Bearing number: 3488 Profile steel shears Manufacturer: Mubea, Type: KBLH 500 Machines NR.: 0156085927332, Year of construction: 0 Specifications: Size Printl 50 To Max punching dia 30 x 15 mm mm Stroke length 0-60 mm Number of strokes per min. 16 Extension 410 mm Flat steel 180 x 20 - 400 x 10 mm Angular steel 50 mm Round steel 55 mm Total power 7.5 kW Hydraulic. Length: 1400 mm, Height: 1800 mm, Width: 800 mm, Weight: 1800 kg

2 x Alpha 18 W-S with integrated redundant pump station Standard Hyfra equipment: Frame construction in stainless steel Economical low-noise scroll compressors Pump built into the housing; Attention: Required Inlet pressure: at least 0.05 bar! Machine with control transformer, no neutral conductor necessary Flow monitors Antifreeze monitoring Fault message with digital display Collective fault message, potential-free External power-on Automatic fan switching from low to high speed Highly efficient condenser with Micro Channel technology Non-cleanable flap evaporators for water Extras: Cooling capacity approx. 25kW at +13°C tank temperature and ambient temperature of +32°C Medium: Water Water-bearing pipes insulated Radiator designed according to the current ECO Design guideline 2021 (adapted compressor, condenser, evaporator) Housing LxWxH 1640 x 71 ...

Robland HX TZ Saw milling Engine: 2x 4 hp, 400V, 50hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Sliding table 1450 x 320mm Cutting length 1200mm Cutting width between Saw blade and parallel stop 600mm Miter attack with ezenter tensioner Weight 340kg

Stainless swing top vacuum packer, chamber dimensions 500mm x 430mm x 100mm, seal bars 400mm, timer / temp controls, mobile, 3Ph

PLOT ELECTRONICS SENTINEL N 2160 CNC router was built in 2021 in Poland by PLOT Electronics. This extremely efficient machine is the perfect choice for precision machining of a wide range of materials, i.e. aluminium, plastics and wood. The machining process is performed on a large vacuum table by means of a reliable, high-speed spindle. X,Y,Z axes are in turn driven by reliable servo drives, which provide appropriate acceleration and speed in each direction. All this is complemented by a light, yet rigid design that eliminates any vibrations during even the most intense challenges. The offer price includes extensive equipment, consisting of, among others, a vacuum pump and advanced cncGraF Pro software. The SENTINEL N 2160 CNC milling machine weighs approximately 2000 kg. Technical specifications of the PLOT ELECTRONICS SENTINEL N 2160 milling machine - software: cncGraF Pro - mach ...

Universal milling machine vertically / horizontally from a training workshop Manufacturer Hermle Type FW801 Tool holder SK40 automatic feed in three axes Digital display in three axes Machine technically in very good condition under electricity ready for demonstration Technical data: Travel: x=350mm y=150mm z=220mm Spindle speeds from 50 to 3,150 rpm can be infinitely variable Feed speed infinitely adjustable via rotary pot from 10 to 5,000 mm/min, aisle Special price Used milling machine Hermle FW 801

R1304Injection moulding machine ARBURG 270-350-90 Multronica thermoset the previous owner sold the Multronica controller for 2,500€ I wanted to convert the machine to thermoplastic. I also found a Multronica controller. There are the following options ---------------------------------------------------------------------- ----------- without control, without funnel, without thermoset device as Spare parts carrier (engine, pump, valves, cylinders, electrics, etc.) €800,-- ---------------------------------------------------------------------- ------------------- with thermoset module + replacement Multronica for assembly €1000.-- ---------------------------------------------------------------------- --------------------- with additional thermoplastic module €1200.-- ---------------------------------------------------------------------- --------------------- all prices +VA ...

3000 x 1500mm 4400w BYVISION

Pot sealer on stainless frame, 12 x pots, 90mm x 90mm pots, variable temp control and timer settings, 3Ph

Diosna SPV 240 AF / T. - 4 boilers - Memory control (digital keyboard) - Temperature measurement - Scrapers - 240 kg dough - perfect condition

The BD Rowa Vmax™ 160 is a modern, fully automated warehouse for pharmacies. With a gripper and the innovative HD Multi-Picking technology, medicines are stored and dispensed quickly, safely and reliably. The system impresses with its maximum efficiency, space-saving design and intuitive operation. Properties: - Year of construction 2023 - Color: White - Dimensions: 412 x 163 x 332 cm (LBH) - Capacity approx. 10,200 – 11,100 medication packs - 2 distribution points - Rear of the system with glass window - Storage on the right front Incl. BD Rowa™ Vmotion: 55" multi-touch monitor in Full HD, capacitive and anti-glare, including wall mount. With this technology, content can be presented in an appealing way and processes can be optimally controlled. It is operated via user-friendly control and operating software, which makes everyday life in the pharmacy easier and a ...

Fully Automation

HEXAGON ROMER ABSOLUTE ARM RA-7525-3 coordinate measuring arm was built in 2014 in France by Hexagon Metrology. The device is used for the precise 3D measurement of complex parts, which are usually inspected on complex metrology devices. The process, thanks to the use of absolute encoders, is performed immediately. Simply switch on the arm and start measuring. What’s more, the universal mount allows the change of measuring probes at any time, without the need to recalibrate. The Zero G counterbalance minimises torque in the base of the device, increasing freedom in mounting options, i.e. lightweight tripods, magnetic and vacuum bases. This solution, combined with immediate acoustic and haptic feedback to the operator, allows the machine to be used in even the most demanding industrial environments. When the HEXAGON portable measuring arm is not in use, it can be locked safely in the ...

Baguette langroller Benier BE / Guette -Baguette long roller with long roll-out belt -Bandwidth: 72cm -Total length with band 445cm

Herbort Cube Cutter 10/10

Machine details 1105-02942 Machine type Flat Grinding Machine - Horizontal Make Sit Type R4 CA Built 1981 Control type Conventional Location France Origin Germany Delivery Right away Freight base EX WORK Price On request Technical details Grinding length 450 mm Grinding width 180 mm Workpiece height 300 mm Total performance requirements 9 kW Information Grinding length max. 500 mm Table stroke maximum 600 mm Grinding width max. 180 mm Table size 600 x 300 mm Working height under grinding wheel 500 mm Grinding head Vertical path 300 mm Vertical delivery 0.001 - 0.06 mm/stroke Grinding slide adjustment across 200 mm Grinding wheel size 400 x 150 x 305 mm Grinding wheel speed stfl. 47 - 970 rpm Table load.600 kg Table lifting speed max. 30 m/min. Grinding spindle drive 12 kW Total drive approx. 20 kW - 380 V - 50 Hz Weight approx. 2,00 ...

CAM CARTONING MACHINE, MODEL AV Year of construction: 2010 Semi-automatic vertical intermittent motion cartoner. For pharmaceutical, cosmetics, nutraceutical, contract packing, FMCG, medical devices and other industries. In stainless steel. Machine in excellent conditions, with manuals. Pre-folded leaflet inserter • Fitted with side cassette feeder for empty boxes • Fully guarded with interlocking • CE marked Output: up to 70 boxes per minute (depending on product and number of operators) Carton box size range • Width: 20 mm to 115 mm; Depth: 15 mm to 75 mm; Height: 50 mm to 195 mm; Width + Depth: up to 190 mm (max) Leaflet dimensions • Length: 100 to 210 mm; Width: 18 to 45 mm ENERGY CONSUMPTION • Power absorption: 1,2 kW • Air consumption: 16.9 Nl/1’ • Air pressure: 5÷6 Bar DIMENSIONS • Size: 3300 mm x 1600 mm x 1900 mm • Weight tota ...

Steel grinding machine Offer number: 20064 Make: REMA Type: DS 12 ST Machine Number: 108267 Built: 1988 Technical data: - Grinding wheel diameter approx. 125 mm - 2 disc speeds 1450 / 2200 rpm - Right, - Left-hand run - tilting fixed support table ATF 340 x 150 mm - Support table -5° to +15° tiltable - Lighting - Drive 400 V / 0.65 / 0.9 kW - Working height 1000 mm - Space requirement approx. W 850 x H 1150 x D 550 mm - Weight approx. 120 kg