used Pellet presses for sale

Wood pelletizing plant, KAHL pellet press used the complex includes: Pellet press AMANDUS KAHL Matrice diameter approx. 1000 mm Pallet diameter approx. Ø 8 mm 5 Koller approx. Ø 340 x 130 mm Motor power 160 kW an auxiliary motor is damaged, but can be replaced by us Dimensions approx. 1600 x 1800 x 3000 mm + motor Weight approx. 8000 kg Conditioner / Dosing and Mixing Screw Diameter approx. Ø 400 mm 5.5 kW Dimensions approx. 3100 x 900 x 800 mm Single shaft paddle mixer Dimensions approx. 3300 x 1600 x 2000 mm + gear motor Pellet coolers Dimensions approx. 2300 x 2300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Capacity 3 ton/hour Motor power 200Kw Die diameter 1000 mm Number of rollers 5

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

Complete pellet line for biomass or animal feed. CPM 3020-4 with 132 kW motor Including CPM Conditioner, CPM press and Geeelen cooler with fan and cyclone. Positive direct gear drive 132 kW, provides a 98% energy transfer Rounded cast gear case with internal ribbing for quieter operation Segmented die clamps for quicker die changes Metal-to-metal seals between components Modular gearbox design for production flexibility Replaceable quill flange Stainless steel pellet chamber Single motor 132 kW for greater efficiency Very good condition.

Pellet mill for ring DIE and two roll shell system. Inside diameter: 900 mm Active operating width: 138mm Active forming area: 3902 cm² Press roll Ø440/142 optionally dimpled or notched Front door Stainless steel front door with large opening angle. pneumatic operated overload bypass protection gate. Two knives with step less length adjustments integrated in the door. Machine housing All housing parts are cut by precision laser. The machine base, the base plate and the housing are welded and reinforced. Drive Drive via 355 kW-1200 rpm engine , timing belt Ø200/1900 - Beltdrive Motor and Motor cables not included. Equipment Central lubrication for roll assembly and main shaft Manual roll adjustment Overload protection provided by a safety pin Die of chrome steel X46 Cr13 with conical seat for an easy change of the die - Die is not included Adj ...

The pellet mill has been refurbished by us and is in as new condition. Die, roll assembly and V-belt are new. Engine power 2 x 110Kw The diameter 650mm Press width 105mm

Pellet press 3-5 tons hour 2006 but very little used of the brand PTN 1100 150-300 Dutch make very very sturdy and very good condition with some spare parts, sale due to project dissolution