Wood pelletizing plant, KAHL pellet press used the complex includes: Pellet press AMANDUS KAHL Matrice diameter approx. 1000 mm Pallet diameter approx. Ø 8 mm 5 Koller approx. Ø 340 x 130 mm Motor power 160 kW an auxiliary motor is damaged, but can be replaced by us Dimensions approx. 1600 x 1800 x 3000 mm + motor Weight approx. 8000 kg Conditioner / Dosing and Mixing Screw Diameter approx. Ø 400 mm 5.5 kW Dimensions approx. 3100 x 900 x 800 mm Single shaft paddle mixer Dimensions approx. 3300 x 1600 x 2000 mm + gear motor Pellet coolers Dimensions approx. 2300 x 2300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw
l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw
L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw
For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...
Freshly revised Koller to CPM Press 3022 or 7022 Punched, 2 new bearings, new sleeve, new intermediate ring, filled with grease. rest used. Koller are no longer needed due to machine changes. 3 pieces Available
Pellet mill for ring DIE and two roll shell system. Inside diameter: 900 mm Active operating width: 138mm Active forming area: 3902 cm² Press roll Ø440/142 optionally dimpled or notched Front door Stainless steel front door with large opening angle. pneumatic operated overload bypass protection gate. Two knives with step less length adjustments integrated in the door. Machine housing All housing parts are cut by precision laser. The machine base, the base plate and the housing are welded and reinforced. Drive Drive via 355 kW-1200 rpm engine , timing belt Ø200/1900 - Beltdrive Motor and Motor cables not included. Equipment Central lubrication for roll assembly and main shaft Manual roll adjustment Overload protection provided by a safety pin Die of chrome steel X46 Cr13 with conical seat for an easy change of the die - Die is not included Adj ...
Pelleting plant for various materials such as wood, miscantus, agricultural by-products and waste products (hay, straw, corn straw ) Feed .. It is a complete system (compact system), which is built on a base frame, and consists of the following components: Storage tank for raw material 4 m³, incl. agitator Inclined mixer for raw material incl. level sensors and fully automatic moisture dosing Dosing container for pressing aids (e.g. Corn starch) Dosirt screw for optimal material feeding of the press (speed controlled) Press 11 kW, with horizontal round die, outlet slide, temperature monitoring, overfill protection.. Conveyor belt for pellet removal, discharge height approx. 2.5 m Drum screen for dusting and cooling the pellets The entire system is operated centrally via Siemens PLC via touch display! In addition, all parameters are permanently monitored, so th ...
I have for sale, pellet production line based on Germany pellet Mill Münch RMP 520, The line is UNIWERSAL! To biomass of wood sawdust or straw pellet! Capacity up to 2 tons/h. Line build in 2012. Line has majority automatic process. Complete line from A to Z. From raw (moist sawdust or straw) to the finished pellets 15 kg bags, big bags or luz. Unfortunately company is stop and can’t look In working condition because there no electricity power enough. In this price I can help to dismantle line, only under YOUR supervision and load on the trucks. I can help to organized transport to your place. I can find a competent person who will start line in your company. The line contains: Complete Dryer: - Belt feeder for moist sawdust - Stove - Automatically feeder for stove - Drum - Cyclones and the jets for dryer Milling parts: - Belt feeder straw for Roto grind - ...
Hello, I will sell a Mercedes among the pelletizers Salmatec Maxima 840 - 320 kW Unique granulator, hardly available used, a real gem. One of the largest granulators. After a complete renovation, dismantled to a single screw, not just repainted. Replaced the heart of the pellet mill on ORGINAL SALMTEC parts (shaft, bearings, sleeves, seals), which will allow for a very long operation without failure or renovation. Old parts available for inspection. If you want to produce and earn money, not renovate, please contact me. If you lack PEOPLE to work and you want to be more efficient, this Salmatec is for you, the possibility of later increasing efficiency by replacing the motors without having to interfere with the machine. The capacity of 4.5 tons after replacing the engines with 2x200 kW can reach even 6 tons / h. The Granulator consists of: 1) A viper for feeding the raw materia ...
