Manufacturer:
(Category: 206)
Dimensions (L/W/H): 1700x1170x1510 mmWeight: 650 kgTotal power requirement: 6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4300x1650x2520 mmWeight: 7900 kgTotal power requirement: 108 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8300x1600x2600 mmWeight: 6000 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1800x1800x1900 mmWeight: 3000 kgTotal power requirement: 33,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Plate dimensions: 3000x1350 mmDaylight opening: 400 mmNumber of daylights: 1 St.Heating: 31,5 kWSpecific pressure: 2,5-5,0 kg/cm²Total pressure: 90 tMotor output: 1,5 kWDimensions (L/W/H): 3480x1500x2000 mmweight of the machine ca.: 5000 kgYear: Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4200x1650x2150 mmWeight: 7500 kgTotal power requirement: 54 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The vacuum-membrane press allows you to apply PVC foil to: MDF elements (fronts, slats), doors, frames and bent elements. The press is also prepared to make bent elements (fronts) up to a height of 40 cm using a membrane. The use of a membrane allows veneer or veneer to be applied to wooden elements. The press works in two systems; automatic or manual with the possibility of employee intervention regarding the temperature and pressure of the press. max dimension of the semi-finished product 2600x1300mm Membrane press ideal for furniture fronts Membrane vacuum press for veneering and bending For coating with thermoplastic films or veneer 2D and 3D vacuum forming of thermoplastics and acrylic materials Woodworking, veneer, veneer, both flat and curved surfaces Surface cover with simple relief, veneer, leather, paper and plastic Production of bent glued vacuum vacuum vacuum parts ...
Membranpresse modell FISMA 210 (ITALIEN) Arbeitsgröße: mm 2100 x 1200 Öffnung mm 500 Arbeitshöhe mm 250 Öffnen und Schließen des Deckels mit vertikalen Pneumatikkolben Diese Presse eignet sich zum Furnieren von Formteilen wie Fensterflügelrahmen und gebogenen Teilen Oberheizung mit Heißluft Beheizung der Unterseite mit Heißluft Verbrauch approx. 9 kWt Arbeitszyklus: approx. 10 Min. Kompletter Kompressor zum Anheben der Abdeckung und unter der Abdeckung Verarbeitungsvorvakuum einstellbar bis 6,5 atm
halbautomatische korpusklemme für möbel modell ORMAMACCHINE PN 30 gebrauchte maschine Technische Daten : Manuelle Beladung maximale Nutzmaße mm.2200 x 600 x 1200 mindestnutzmaße mm.250 x 600 x 280 motorisierter horizontaler Querträger manuell verschiebbare vertikaltraverse n.6 vertikale zylinder n.4 horizontale zylinder Zylinderhub mm.70 installierte Leistung kW 0,30 gesamtmaße mm.3000 x 800 x 2100 h Gewicht kg 1200
Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4
Code: 0218 Brand: ORMAMACCHINE Model: P25/2 Hydraulic cold press for wood, furniture, doors, panels, furnishings , composite materials, plastics, aluminum and various materials Platen dimensions mm 2500 x 1200 Aluminum-coated platens Opening mm 500 N° 2 hydraulic pistons Ø 40 Total thrust 10 ton Motor Hp 1,5 Overall dimensions mm 2600 x 1200 x 2100 h Weight kg 800
pressure: 7 tthroat: 180 mmstroke: 100 mmtable surface area: 320x300 mmram surface: Ø110 mmhole in the table: Ø50 mmtable height: 850 mmtool hole in ram: Ø30 mmweight of the machine ca.: 1,5 tdimensions of the machine ca.: BxTxH 1300x1300x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible.
Complete wood pellet production line up to 2000kg/h. Currently still connected, can be launched, tested. Sold for dismantling. The entire line - from automatic sawdust feeding to semi-automatic packaging in PE bags or big bags. The line is equipped with a sawdust moisture flow meter (German) that constantly measures sawdust moisture after drying, making it much easier for the operator to regulate the drying process. 2-3 workers worked per shift. Granulator - 2x55kW motors, matrix diameter 450mm.
Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 78 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 930 x 590 mm Number of strokes: 620 - 1.120 s.p.m. Required power: 40 kW Dimensions L x W x H: 3.900 x 1.400 x 3.065 Weight of machine approx.: 9 ton
Orma shelf press 2500x1300mm Shelf length 2500mm Shelf width 1300mm Maximum load height 400mm Press on 4 cylinders Cylinder diameter 75mm Working pressure max 300bar Shelves heated with water from central heating
SPECIFICATIONS: Working width: 3000 mm Working height: 2500 mm Expandable bottom stop Equipped with manual workholding system 02 Pressing devices Hanging control panel Installed power: 1.8 kW
used tested briquetting press New components in the electrical box V400/50 Diameter briquette 50 mm Capacity approx. 50 kg/h
RODEA hydraulic folding clamp mod. S - CE standard - Year 2002
VECCHIATO pre-bending press mod. SN 2000/120 - Mould table length 2000 mm - Thrust 57 Ton - Min/max length of elements to be bent 500/1500 mm - Maximum thickness of elements to be bent 40 mm - Lower bench made of flexible steel sheets - Power 2.2 kw -Volt. 380/50 - Matr. 05-05 - CE standards - Year 2005
VECCHIATO bending press mm. 2600X1300 mod. DE 120/70_800 – CE compliant - Opening mm. 1500 - 4 cylinders - Top-down movement - Protective nets - Year 2005 - Complete with manual and CE declaration
WEINIG GRECON double-head finger joint line mod. PJ 150/500 - CE - Wood length at the entrance 150 - 700 - Wood width 40 - 150 mm - Wood thickness 18 - 80 mm - Press length 6100 - Pressure force 120 kN - 15Kw cutter motor - 5.5Kw engraver - Year 2004 CE
MAWEG frame press with automatic adjustment of height and width Press size 4.50 m.x 2.60 m. Frame Press Size: 5.30 x 3.40 x 1.30 m.
SPECIFICATIONS: Working width: 3000 mm Working height: 2500 mm 4 push-button plate suspension handles TS/500 Interface 4 safety light barriers Installed power: 3 kW
pressure: 800 tdistance between columns: 3550 mmstroke: 1100 mmdistance table/ram, max. stroke up, adjustment up: 1900 mmtable surface area: 3500 x 1800 mmdie-cushion pressure inside the table: 350 tstroke of drawing cushion in table: 295 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in pusher: 160 mmram surface: 3500 x 1800 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled sliding table: without rails for travel total power requirement: kWweight of the machine ca.: 265 tdimensions of the machine ca.: moverhauled in 1998The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1600 tdistance between columns: 3160 mmram stroke: 1450 mmdistance table/blankh.,max. stroke up,adjustm. up: 2250 mmtable surface area: 4000 x 2200 mmram pressure: 1000 tpressure of blank holder: 600 tstroke of blankholder at the bottom: 1000 mmstroke of blankholder with adjustment 0-100 mm: 1450 mmblank holder size: 4000 x 2200 mmdie-cushion pressure inside the table: 360 tstroke of drawing cushion in table: 275 / 400 mmram surface: 4000 x 2200 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled oil volume: 9000 ltotal power requirement: 390 kWweight of the machine ca.: 250 tdimensions of the machine ca.: 6,0 x 4,3 x 10,5 mHead press (1600 tons) of a press line with five subsequent presses (800 tons)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tdistance between columns: 1200 mmstroke: 500 mmtable surface area: 1200x1000 mmram surface: 600x400 mmtable height: 850 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4 tdimensions of the machine ca.: BxTxH 2400x2200x3400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gluing press Emmes Type: H EBP 500 . 10 Working length 5000 mm Working height 1530 mm Support width or depth 150 mm 10 Hydraulic Vertical Press Punch 5 pneumatic front hold-down devices max. compressive force 150/cm² Hydraulic pump 2.2 kW Oil pressure 159 kg/cm Air pressure 8 kg/cm²
Henrik Winter Holztechnik GmbH
