planing machines used for sale (538)

PART NUMBER 7474 Specifications: - max width of the workpiece 230mm - max height of the workpiece 160mm - number of spindles 5 1) Horizontal bottom 230mm 7.5kW 2) vertical right 160mm 5.5kW 3) Vertical left 160mm 5.5kw 4) horizontal top 230mm, electrically adjustable up/down 7.5kW 5) Horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed insertion shafts, including 2 double shafts - 2 pulling lead shafts, rubber, single from below: - Pulling, metal, torsion toothed insertion shaft - Metal, smooth metal pulling outfeed shaft - pressure plate on the side - pneumatically adjustable rollers - length of the introductory table top 2020mm - central lubrication - Electric planing thickness adjustment from the control panel - smooth feed speed control 6-30m/ ...

PART NUMBER: 7518 Specifications: - shaft width 810mm - number of knives 4 pcs - max thickness of the workpiece 250mm in advance: -Triggers - toothed insertion shaft, pulling shaft -Clamps - planing roller -Clamps - smooth, pulling outfeed shaft from below: - adjustable rollers in the bottom top 2 pcs - 7.5kW motor - electric lifting of the table top - 0.5kW lifting motor - 4 types of feed speeds -brake - extraction spigot diameter 160mm - dimensions length/width/height 1350x1450x1700mm - weight about 1100kg ADVANTAGES – Polish production – electric lifting of the table top – used thicknesser, very good condition Net price: 25900 PLN Net price: 6023 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

PART NUMBER: 7503 SPECIFICATIONS: - max planing width 610mm - max planing height on both sides 200mm - max planing height on four sides 100mm in advance: - 2 rubber pull rollers - 2 toothed pulling rollers - metal pulling roller - Pulling insertion shaft, toothed -Triggers -Pressure - pulling shaft, toothed 2 pcs -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - Pulling roller, smooth, metal -Pressure - profiling roller 7.5kW -Pressure - rubber pulling roller From below: - scoring unit, axle 35mm, axle length 130mm 2.2kW - guide strip 2 pcs - Introductory table top - Pulling shaft, smooth - planer shaft 610mm, 4-knife (2 knives installed) 7.5kW - 2 pulling shafts, smooth - Split metal skid roller - side pressure behind: - Side spindles + clamps 2 - 1) vertical right 95mm 4kW - 2) vertical left 95mm 4kW - spindle diameter 35mm - spindles adjust ...

Griggio G240 P/5U Four-Sided Planer for Wet Maximum planing width 240mm Maximum planing height 160mm Number of spindles 5 Spindle arrangement Bottom 5.5kw Right 5.5kw Left 5.5kw Top 7.5kw Universal 5.5kw Drive in wet wood table Smooth feed control on the inverter up to 30m/min Year 2007 Weight 4100kg Machine dimensions 440x220x180cmH CE Certified

Key data: 7 , 230 mm, 160 mm

SPECIFICATIONS: Maximum processing height: 160 mm Maximum machining width: 230 mm Length of inlet planer: 2100 mm Spindle diameter: 40 mm Number of Spindles: 7 (6 + 1 Universal) Grid table Shaft drive (3.7 kW) Self-braking motors Voltage: 380 V Spindle configuration: 1ST: BOTTOM (5.5 kW) 2ND: RIGHT (5.5 kW) 3.: LEFT movable (5.5 kW) 4TH: RIGHT (5.5 kW) 5TH: TOP (7.5 kW) 6TH: BOTTOM (7.5 kW) 7TH: UNIVERSAL SPINDLE 360° (7.5 kW)

Key data: 500 mm, 2800 mm, 3 St.

SPECIFICATIONS: Working width: max. 500 mm 2 tables with a total length of: 2800 mm Installed power: 5 kW Roller with 3 knives

Weinig Unimat 1000 Star four-sided planer Working width 20-230mm Working height 8-160mm Number of spindles 6 Spindle system: Bottom 5.5kw 6000r.p.m Right 4kw 7000r.p.m Left 5.5kw 7000r.p.m Mountain 7.5kw 7000r.p.m Bottom 7.5kw 7000r.p.m Universal 7.5kw 7000r.p.m Automatic height and width setting Automatic Countertop Lubrication Pump Countertop driven rollers (1 corrugated roller for wet wood) Pusuw speed adjustable by variator 5-24m/min Weinig EM10 automatic material feeder

Key data: 500 mm, 2850 mm, 3 St.

Power connection 400V 4.0kW Planing width 500 mm Extraction 1x140 mm Stop angle adjustment 3-knife shaft with strip planer blades WxDxH: 2850 x 910 x 940 mm Weight approx. 750 kg Workshop overhauled

Code: 0441 Brand: CASADEI Model: SYNCRO Four side straightening planer with 4 spindles for wood, window frames, furniture, garden furniture, sawmill and various Technical data: One-piece steel base Min/max working width mm 20/180 Min/max working height mm 6/105 Infeed table length mm 2000 Infeed table and fence adjustment mm 10 Spindles diameter mm 35 Feeding speed 6/12 mt/min Rebating cutterhead diameter mm 120 Powered feeding siystem raise Composition: 1° Spindle surface planer - Motor Hp 10 - Size mm 190 x 100 Z3 2° Spindle right spindle moulder - Motor Hp 7,5 - Size mm 120 x 100 Z3 3° Spindle left spindle moulder - Size mm 120 x 100 Z3 4° Spindle thickness planer - Motor Hp 10 - Size mm 190 x 100 Z3 Diameter of suction ports mm 120 N° 4 Planer heads Overall dimensions mm 3000 x 1160 x 1555 h Weight kg 900

Key data: 4 , 180 mm, 105 mm

Planing width min max 23 – 180 mm Planing height min max 6 – 105 mm Min workpiece length 300 mm Feed speed 6 and 12 mm Spindle speed 6000 rpm Spindle 35 mm Vertical shaft engine 7.5 kw / 10 hp Horizontal shaft motor 7.5 kw / 10 hp Clamping length of vertical shafts 120 mm Clamping length of horizontal shafts 190 mm Min max tool diameter On vertical shafts 100-120 mm Profiling option without axial adjustment on the vertical shafts Feed rollers D 120 mm Dressing table length 1700 mm Manual lubricant pump included as standard Planer heads Tersa (on request) Suction nozzle D 120 mm 4 pcs. Ce version

Key data: 6 , 220 mm, 120 mm

WEINIG 4-sided planing machine model U22A with soundproof cabin Spindle arrangement: R - L - R - O - U - L

Key data: 630 mm, 300 mm, 9 kW

EXHIBITION MACHINE Weight 950 kg Voltage 3 x 400 V Engine power (S6) 9.2 kW / 12 hp Dust extraction connection 160 mm Diameter knife block 120 mm Number of knives 4 Dimensions knife 630 x 30 x 3 mm Max. cutting depth 8 mm Width 630 mm Height capacity thickness planer 3 – 300 mm Dimensions thickness planing table 1160 x 630 mm 8D9Qxjdewy Variable feed speed 5 – 22 m/min. Diameter of feed rollers 70 mm incl. TERSA. Knife shaft Image includes optional accessories

Key data: 4

EXHIBITION MACHINE Specifications: - Max. dimension (WxH) Finished part 180x105mm - Working width min. 23mm - Working height min. 6mm - Long min. single workpieces 300mm - Feed speed 6 - 12m/min. - Spindle speed 6,000 rpm. - Spindle diameter 35mm - Usable length horizontal spindle 190mm - Usable length vertical spindle 120mm - Adjustment of feed table and infeed guide 10mm - Horizontal spindle tool diameter 100mm - Min./Max. tool diameter Verticel spindle 100/124mm - Roll forming option Verticel spindle 12mm - Unit adjustment range for the planing heads +/- 1mm - Motor power horizontal spindle 7.5 kW - Motor power Verticel spindle 7.5kW - Motor power feed 0.75 / 1.1 kW - Length of material feeding table 2300mm - Diameter of extraction hoods 1x150mm, 2x120mm

Key data: 4 , 180 mm, 120 mm

Connected load 380V 46A Planing width 180 mm Planing height 120 mm Length of mounting table 2300 mm 4x Leitz reversible knife heads with 4 knives each 2x feed speeds Electric height adjustment 4x star-delta switch 2x Low Pressure Holder Iewdlj0 1x Side Pressure Holder 2x steel feed shafts 1x rubberized pull-out roller Extraction connection 4x120 mm Workshop overhauled

Weinig Profimat 26 Super four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle arrangement Bottom 4kw Left Right 7.5kw Top 5.5kw Bottom 4kw Pneumatic clamps divided into 3 sections Feed speed adjustable by variator 5-24m/min CE Certified Technical documentation

Working width: 630 mmWorking height: 3 - 250 mmMotor output: 7,5 kWFeed speed: 7 und 14 m/min.Dimensions (length / width): 2700 x 1700 mmweight: ca. 1.450 kgDust suction hood: 2 x 160 mmCOMBINED PLANNING AND THICKNESSING MACHINE 546|100Manufacturer descriptionSolid German mechanical engineeringConvenient planing and thicknessing without machine conversion, dimensionally stable andprecise dressing tables, as there is a folding upomitted, for planing widths up to 630 mm and dual operation up to 315 mm eachPANHANS solid steel cutter block with 4 Tersa reversible knivesSURFACE PLANE:Table length 2555 mm, planed with toothed table lipsElectromotive adjustment of the feed table via button with digital displaythe chip removal max. 5 mmDressing fence can be inclined up to 45°, in an extremely smooth-running steel guidestoredDressing ruler, anodised, with swiveling auxiliary stop 1545Bridge prot ...

PISANI TR4 4-shaft beam planer: – working dimensions L=400 x H=300 mm – variable feed speed – motorized width and thickness adjustment, with digital displays on the control panel – pneumatic approaches at the inlet and in the machine center – with idle roller conveyors at the machine inlet and outlet – complete with 4 knife heads – total installed power 55 kw, volt 380 – weight about 5500 kg Trees: – under 11 kW / 15 HP – above 18.5 kw / 25 hp – right kw 11 / hp 15 – left kw 11 / hp 15 Machine not CE compliant, for export

Number of spindles: 6 St.Working width: 230 mmWorking height: 160 mmLength of the planing table: 1050 mmFeed motor: 7 kWFeed speed: 6-40 m/min.Weinig Powermat 1200------------------------------------------------------------------ -----with infeed automation Weinig wheel magazine EM 100 and linkedwith outfeed automation Weinig High-Mech A 1The machine will be completely checked in our warehouse before delivery!Detailed description:---------------------------------------------------------- -------------1. Weinig planer and moulder Powermat 1200------------------------------------------------------------------ -----Technical data:------------------------Working width 20 - 230 mm (with tool flight circle 93 - 163 mm)Working height 10 - 160 mm (with tool flight circle 93 - 163 mm)1. Spindle-----------------------------First lower horizontal spindleMotor with brake 7.5 KWSpindle diameter 50 mm ...

Thicknesser SP 400 Working width 400mm Working height 250mm Electric lifting and lowering of the worktop 4-knife shaft with traditional knives Plough shaft speed 5000r.p.m 4kw main motor Extraction spigot fi120 Machine dimensions 800 x 1000 x 1080mmH Weight 410kg Net price

Weinig H30N four-sided planer Working width 300mm Working height 200mm Number of spindles 5 Spindle system: Bottom 11kw Right 11kw Left 11kw spindle angle adjustable up to 90° Right 7.5kw spindle angle adjustable up to 45° Top 11kw Feed speed adjustable via variator up to 22m/min 9kw Feed Motor Drive in the work table: – 3 rows of grooved pulling rollers in front of the first head – 5 rows of smooth pulling rollers Top drive: – 9 rows of pulling rollers Machine weight 6100kg Machine dimensions 470x190x160cmH

Automatic planing profile milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm (260) Working height 8 - 120 mm(140) 5 working spindles DM 40 mm Long work table in the inlet ( approx. 2000 mm ) Working spindle bottom 4 kW / Left + Right 7.5 kW / Top 5.5 kW / Plastering bottom 5.5 kW Pneum. Pressure of the feed rollers Cardan feed infinitely variable 5 - 24 m/min. Feed roller in front of dressing Control - Button operation Auto. Lubricant pump Mechanical Digital Displays Machine in CE version Year of manufacture 2001 Without editing tools Machine is WORKSHOP OVERHAULED in GOOD - CONDITION from stock Lieboch

5-shaft automatic planer WEINIG PROFIMAT 22N second hand machine in very good working conditions n.5 spindles working condition : good CE mark : NO volt. 380/50 with tools : Yes . n.04 LEITZ tools with interchangeable knives + n.04 spare tools (see photo) Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 7,5 ( Kw 5,5 ) 4° spindle : thickness planer . motor power Hp 7,5 ( Kw 5,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) Technical details : forward motor power Hp 3 ( Kw 2,2 ) spindle rotation speed rpm 6000 feed speed : from 6 to 22 mt./min max. useful working width mm. 220 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 lubrication system electric height adjustment set of service keys / documentation

Weibert FS32 Spiral Dressing thickness planer FS32 Dressing Thickness Planer with Spiral Knife Shaft Weibert FS32 Planing width: 320mm Spiral knife shaft Motor power: 4KW n=4500rpm, 400V Passage height: 4-225mm Professional stop Digital height adjustment WJ-300100 Special price: OPTIONS AT EXTRA COST: Slotted Hole Drilling Device Wescott Drill Chuck 0-16mm Driving equipment Dressing table extension adjustable 750mm

Working width: 630 mmWorking height: 3-310 mmMotor output: 7,5 kWNumber of knives: 4-TERSA St.Feed speed: 6-20 m/min.Vertikal stroke: elektrisch FIMAL thickness planer type SP 63 A-----------------------------------------------------NEW MACHINE Partnership EditionTechnical data / basic equipment:------------------------------------------------------ 4-knife V-shaft, d = 120 mm, speed 4,800 rpm.- Table height adjustment via 4 trapezoidal spindles- chip removal up to 8 mm- Min. / Max. working height: 3/310 mm- Min. workpiece length: 250 mm- Suction nozzle 150 mm- Electrics and protections in accordance with CE standards- Planing width: 630 mm- Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch- Infinitely adjustable feed speed from 6 to 20 m/min.- Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with electronic display)- ...

Key data: 410 mm, 2 St.

Loading table each 1200 mm, 4 Kw, weight approx. 500 kg

2 KW, 400 V, 50 Hz, 3-knife shaft 250 mm, Chip removal max. 3 mm, Thickness height max. 180 mm, Dressing tables each 525x255 mm, Thickness table 600x250 mm, Dressing stop adjustable up to 45°, Suction nozzle 100 mm, Weight 147 kg

THCIKNESS PLANER model SCM S 630 second hand machine CE mark : Yes working conditions : Excellent technical details : useful working width mm. 630 maximum (minimum) working height mm. 300 (3) maximum removal mm. 8 variable feed speed mt./min. 6 ÷ 20 motorized table positioning with electronic reading pneumatic roller pressure n.4 knives "Tersa" main motor power Hp 7,5 volt. 380/50

PART NUMBER: 7343 SPECIFICATIONS - max width of the workpiece 180mm - max height of the workpiece 120mm 4 spindles: 1) Horizontal bottom 180mm 4kW 2) vertical right 120mm 4kW 3) Vertical left 120mm 4kW 4) Horizontal top 180mm 5.5kw - spindle diameter 40mm - all heads adjustable up/down, right/left - pressure on the insertion - 6 leading, pulling, toothed shafts from the top, including 1 double - double lead-out, pulling, rubber shaft at the top - leading, pulling, toothed, wide, metal shaft at the bottom - Lead-out, pulling, metal, smooth shaft at the bottom - feed motor 2.2kW - feed on cardan shafts - Infinitely variable feed speed - Electric planing thickness setting - lifting motor 0.75kW - length of the introductory table 1580mm - extraction spigot diameter 4x120mm - dimensions length/width/height 3040x1500x1700mm - weight about 2800kg ADVANTAG ...

Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Spindle arrangement Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material clamps divided into 4 sections Feed speed adjustable by variator 4-24m/min Input table length 1980mm Drive on cardan shafts Thick soundproof cab Machine dimensions 380x226x178cmH CE Certified