used Moulders for sale

BOTTENE – PASMEC moulding line for beads and planks, composed as follows: Automatic loader PASMEC, year 2005 : - PLC for work cycle programming - arm with suction cup system and vacuum pump - 1600mm useful stroke, brushless motor and prismatic guides - side aligners + pneumatic introducer pusher BOTTENE TARGET 606 moulder with 6 shafts, year 2017: – useful working measures 230x150mm – gimbal towing and differentiated pneumatic pressure – variable feed speed 6 – 60 mt/min with inverter – feed motor KW 7,5 – HP 10 – top feed wheel before the 1st shaft – group of tandem feed wheels in front of the 2nd shaft – overlapping feed wheels (top + bottom in the plane): at machine entrance, before the 1st shaft between the 4th and 5th tree at machine output, after the 6th shaft – short 1200mm entry plane – lubrication pump – protection cabin  ...

Description: Max. machinable height 120 mm Maximum machinable width 230 mm Max. forward feed speed 12 m/min Min. machinable height 6 mm Maximum machinable height 120 mm Min. machinable length 370 mm Min. machinable width 25 mm Maximum machinable width 230 mm Max. forward feed speed 12 m/min Forward feed wheels yes No. rubberised wheels 1 No. toothed wheels 4 total number of wheels 5 Operator units 4: OPERATOR UNITS 1 Cutting shaft : bottom shaft diameter : 40 mm shaft length : 240 mm Motor power : 4 KW OPERATOR UNITS 2 Cutting shaft : Right shaft diameter : 40 mm shaft length : 240 mm Motor power : 4 KW OPERATOR UNITS 3 Cutting shaft : left shaft diameter : 40 mm shaft length : 240 mm Motor power : 4 KW OPERATOR UNITS 4 Cutting shaft : top shaft diameter : 40 mm shaft length : 240 mm Motor power : 4 KW Control system Siemens Simatic Panel Touch Safety standard EC mark Auto ...

Description: Spindle Moulder Working widht 220 mm Inlet table 2300 mm 4 Independent engines Pressure by spring Unfixed roller on outlet table 2 speedsserial number: 96,086, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 1,650 mm, weight approx.: 1,800 kg

Description: serial number: M000076467 Size of workpiece Width: 20-230mm Thickness: 8-160mm Feeding speed: 6-30 m/min Infeed table length: 2.000 mm Height adjustment infeed table: 10mm 1st lower horizontal planer shaft, diameter 40mm, motor power 7,5kw, 6.000 rpm 2nd vertical planer shaft, right, diameter 40mm, motor power 5,5kw, 6.000 rpm 3rd vertical planer shaft, left, diameter 40mm, motor power 5,5kw, 6.000 rpm 4th upper horizontal planer shaft, diameter 40mm, motor power 7,5kw, 6.000 rpm 5th lower horizontal planer shaft, diameter 40mm, motor power 9,2kw, 6.000 rpm 6th UNIVERSAL (vertical or horizontal) planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm Feeding motor power 3 kw serial number: M000076467, planing width: 240 mm, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,200 x 2,000 mm, weight approx.: 2,000 kg

Type G617 Working width 170 mm Working height 110 mm Infeed table length 1600 mm 7 spindles B, R, T, L, R, T, B Spindle diameters 40 mm Feeding speed 30 m/min Made in Germany 1971 y. Transport dimensions 4900x1100x1500mm Weight 3100 kg Price 2400 Eur (EXW Jonava, Lithuania)

Gubisch planer and moulder 172/7 S/N 3425 80 Year of construction 1980 Length of the dressing table 1950 mm Planing width maximum 170 mm Planing height maximum 120 mm Spindle diameter 40 mm 7 planing shafts : 1.Bottom dressing shaft 7.5 kW 2.Right joining shaft 3.0 kW 3.Left wave 4.0 kW 4.Right shaft 4.0 kW 5.Top Thickness shaft 4.0 kW 6.TopDickenhaft 5.5 kW 7.Uniwelle top / bottom 3.0 kW Voltage 380 V, 50 Hz Power consumption 33.6 Kw Feed motor 1.5 kW Feed speed infinitely variable 5 – 30 m/min. Weight 3300 kg Dimensions ( L X W x H )4800 mm x 1400 mm x 1850 mm technical information subject to reservation

Description: Total processed length: 205,152 m Operating voltage 400 V Frequency 50 Hz Working width min. 10 mm (with tool diameter 125 mm) Workpiece width after processing min. 10 mm and max. 250 mm Working height min. 10 mm (for tool diameter 125 mm) Workpiece height after processing min. 10 mm and max. 160 mm Control: powerControl with Powertouch MOULDTEQ M-300 Feed: Feed system - 6 spindles Feed speed 24 m/min infinitely adjustable via powerTouch Feed speed min. 6 m/min and max. 24 m/min Maximum tool weight 22 kg with CE certificate and documentation without tools1. spindle: 7.5 kW, 2. spindle: 7.5 kW, 3. spindle: 7.5 kW, 4. spindle: 7.5 kW, 5. spindle: 7.5 kW, 6. spindle: 7.5 kW, serial number: 0-254-11-2760, planing width: 250 mm, planing height: 160 mm, length of surfacing-table: 2,500 mm, number of spindles: 6 pieces, feed: 24 m/min, Approx. Onsite Dimension. (l x w x h): 4,800 x ...

Description: • Moulder • Serial number 825018 • Total installed power 16.10 KW • Working width from 23 mm up to 180 mm • Working height from 7.50 mm up to 120 mm • Total table length approx. 2700 mm • Entrance table length 1700 mm • 4 heads: below - right - left  ,- above • Motor power of the lower-upper heads 7.50 KW • Motor power of the right-left heads 7.50 KW • Spindles diameter 40 mm • Spindles rotation speed 6000 rpm • Feeding motor 0.80 KW • 2 feed speeds: 6 - 12 m/min • Control  ,with digital reader for workpiece thicknesApprox. Onsite Dimension. (l x w x h): 2,730 x 1,110 x 1,410 mm, weight approx.: 950 kg

Type 1B/1K-M length of workpiece. 5000 mm workpiece width. 300 mm Quontity of mortising: 180 mm working height 1/Max 20mm Number of motors 2/380 V 50Hz Air pressure 6 bar Made in Italy 2007y Transport dimensions 4200x2000x2400mm Weight 2000 kg Price 7500 Eur (EXW Jonava, Lithuania)

Description: Four-Sided Planer - Falling Widths Overview: The four-sided planer with falling widths is a versatile and powerful machine for woodworking. With its ability to accurately process a wide range of workpieces, it offers efficiency and reliability for producing profiles and surfaces in woodworking applications. Key Features: Groove Bed Working Width: 15 - 230 mm Working Thickness: 10 - 150 mm 1st Horizontal Bottom Shaft: 7.5 HP - Min./Max. Tool Diameter 125-160 mm 2nd Shaft Right: 7.5 HP - Min./Max. Tool Diameter 125-200 mm 3rd Shaft Left, Automatic: 7.5 HP - Min./Max. Tool Diameter 125-200 mm 4th Shaft Right: 10 HP - Min./Max. Tool Diameter 125-200 mm 5th Horizontal Top Shaft: 10 HP - Min./Max. Tool Diameter 125-200 mm 6th Horizontal Bottom Shaft: 10 HP - Min./Max. Tool Diameter 125-200 mm Feed Speed: 6-24 m/min Infeed Table: 2500 mm Installation: Power Supply: 400V, 50Hz, 3 ...

Description: • Moulder • Serial number 91450 • Total installed power 59.60 KW • Working width from 15 mm up to 230 mm • Working height from 10 mm up to 150 mm • Total table length 4930 mm • Entrance table length 2000 mm • 6 heads: below 7.50 KW - right 7.50 KW - left 7.50 KW - above 11 KW - above 11 KW - universal 11 KW • Spindles diameter 40 mm • Spindles rotation speed 6000 rpm • Feeding motor 3.80 KW • Variable feed speed from 6 m/min up to 24 m/min • Control  ,with digital reader for feed speed, width and height of the workpiece • Some accessories are includedApprox. Onsite Dimension. (l x w x h): 4,960 x 2,150 x 2,320 mm, weight approx.: 5,500 kg

Brand: MARTIN Type: T90 with 7 spindles Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 22 - 240 mm (260 possible with ingekammerte planing heads) Planer thickness: 5 - 170 mm 1. Planer shaft dresser: Spahn removal max. 10 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 2&3. Spindle: Vertical callibrier planing and contour shafts, Spahn removal max. 10 mm, clamping length 160 mm, flight circle min. ø100 max ø125 mm, Z-4, 6.000 rpm, 7.5 KW 4. Thickness shaft/upper shaft: horizontal spindle tap removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 5. Top spindle 2nd profile shaft horizontal, Spahn removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 - max ø180 mm, 6.000 rpm, 7.5 KW, adju ...

Description: Planer, 4-sided moulder serial number: AB/095522 size of workpiece width: 20-230mm thickness: 8-160mm feeding speed: 6-30 m/min infeed table length: 2.000 mm height adjustment infeed table: 10mm 1st lower horizontal planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm 2nd vertical planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm 3rd vertical planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm 4th upper horizontal planer shaft, diameter 40mm, motor power 7,5kw, 6.000 rpm 5th lower horizontal planer shaft, diameter 40mm, motor power 7,5kw, 6.000 rpm feeding motor power 3 kw, 380v, 50Hz, 71A  , serial number: AB/095522, feed: planer moulder m/min, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,100 x 1,700 mm, weight approx.: 3,100 kg

Description: Max. machinable height 120 mm Maximum machinable width 230 mm Lined sliding table yes Max. forward feed speed 25 m/min Operator shafts number 5 Min. machinable height 6 mm Maximum machinable height 120 mm Min. machinable length 620 mm Min. machinable width 25 mm Maximum machinable width 230 mm Lined sliding table yes Max. forward feed speed 25 m/min Forward feed wheels yes Operator units 5 OPERATOR UNITS 1 Cutting shaft : bottom shaft diameter : 40 mm shaft length : 250 mm max. tool diameter : 200 mm Motor power : 7.5 KW OPERATOR UNITS 2 Cutting shaft : Right shaft diameter : 40 mm shaft length : 195 mm max. tool diameter : 200 mm Motor power : 7.5 KW OPERATOR UNITS 3 Cutting shaft : left shaft diameter : 40 mm shaft length : 195 mm max. tool diameter : 200 mm with positioning from NC : yes Motor power : 11 KW OPERATOR UNITS 4 Cutting shaft : top shaft diameter : 40 mm shaft ...

Description: serial number: AB/146367 Technical specifications: spindle diameter 50 mm spindle height 180 mm height adjustment useful stroke 140 mm rotation spindle speed: 3000 / 4500 / 6000 / 7000 / 10000 maximumum tool diameter 250 mm table top dimensions 1200 x 730 mm height from base 925 mm voltage 400 V, 3 phases, 50 Hz, 12 A motor power 5.5 kW serial number: AB/146367, planing height: 180 mm, length of surfacing-table: 1,200 mm, spindle diameter: 50 mm, total power: 5.5 kW, packing measure approx (l x w x h): 1,200 x 730 x 925 mm, Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 1,300 mm, weight approx.: 600 kg

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

Vacuum Feeding System Stuer With lift table Lödige Infeed mechanization for planer or other equipment Vacuum Feeding System Stuer With 12 vacuum cups Vacuum cups adjustable on rails Maximum width 250 mm, length 1600 mm Suction cup diameter approx. 50 mm Dimensions 3300 mm x 2500 mm x height 3500 mm Lift table Lödige Load capacity 3000 to. Platform size 2250 mm x 1200 mm With 2 side ejectors for transport into a planer The system was used to feed a four-sided planer.

Year of manufacture: 2004 Planner: High-speed Moulder/Planer Waco Maxi Working height: 14 - 150 mm Working width: 30 - 300 mm Complete moulder line with High-speed Moulder/Planer Waco Maxi and mechanization from Almab Planer/Moulder: - High-speed Planer/Moulder: Waco Maxi - Year of manufacture: 2004 - Feed speed: 30 - 350 m/min - Spindles: 7 Technical description: - Working width: 30 - 300 mm - Working height: 14 - 150 mm - Cutting circle: 180 - 260 mm - Combination: bottom/top/left/right/top/bottom/bottom - PLC system: Siemens - Weight: 16 500 kg

Planer and moulder Wadkin GA220 with 9 spindles Year of construction 1980 Maximum size of the approved wood 230 x 130 mm Maximum size of the finished wood 220 x 120 mm Configuration: 1. Spindle Bottom 2. Spindle Right 3. Spindle Links 4. Spindle Right 5. Spindle top 6. Spindle Bottom 7. Spindle Top 8. Spindle Bottom 9. Spindle Universal Most engines are 5.5kW and 7.5kW / 11.0kW Feed speeds variable 6- 36m/min Feed roller diameter 140mm Spindle diameter 40mm Spindle speed 6000 / 9000 opt. RPM Straightening table 2,0m max clamping removal 10mm technical information subject to reservation

2-sided planing machine with slot bed: Year of construction 1993 Working width 170 mm Working height 120 mm Working height 4-sided 120 mm Number of spindles 4 Spindle arrangement u-o-u-o Diameter of the spindles 50 mm Spindle speed 6000 rpm Engine power 30-22-11-11 kW Feed speed 12-120 m/min Driven rollers in table 6 Automatic table lubrication Table height constant 840 Diameter of the suction nozzles 4x160 mm Weight 4500 kg Space requirement 4000x1700x1400 mm Voltage / Frequency 400V 50Hz 3Ph.

WEINIG Hydromat H23 LINE, S/N 89533 Package chain conveyor with 5 chains approx. 2,700 x 4,800 mm WEINIG infeed transverse transport HighMech E-1, with 7 flat chains approx. 2000 x 4200 mm WEINIG Hydraulic Roller Accelerator 814 Short infeed table with heavy 4-roller feeder WEINIG Outlet HighMech A-5 Pull-out hinge approx. 2,000 mm x 250 mm Transverse transport with 7-fold cam chain 4,200 mm Transfer to 7-fold flat belt transport Scissor lift with driven chain support Automatic planer with reinforced KASCHWIG soundproof booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed infinitely variable 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 15.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle top 15.0 KW • 5th spindle bottom 11.0 KW • 6th s ...

Moulder Weinig PFA 14/7 Specifications: Working width (mm) 140 Waves: 7 1. Shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5. Shaft: up 6. Shaft: down 7th Wave: Uni Wave

SPECIFICATIONS: Entrance headstock of mm: 2500 Number of spindles: 5 Spindle Configuration: I Down - CW 5,5 II - III right-left - week 7.5 IV Top - CW 5.5 V Down - CW 4.0 Cardan shaft drive Gear motor KW: 2.2

SPECIFICATIONS: Passage mm: 230 Length entrance table mm: 2000 machining height mm: 120 Spindles: 6 Spindle configuration: 1 BOTTOM - CW 5.5 2 RIGHT - CW 5.5 3 LINKS - CW 5.5 4 TOP - CW 5.5 5 BOTTOM - CW 5.5 6 UNIVERSAL SPINDLE - WEEK 7.5 Spindle diameter mm: 40 Cardan shaft drive Feed speed: 6-36 m/min Revolutions per minute: 6,000 Soundproof cabin

SPECIFICATIONS: Pre-planer machine inlet mm: 2000 Number of spindles: 6 (5 + 1 universal) Spindle Configuration: I Bottom: CW 5.5 II - III right-left: week 7.5 IV top: week 5.5 V Bottom: KW 5.5 VI Universal spindle: KW 5.5 Cardan shaft drive Variable speed drive KW: 3.0 Revolutions per minute: 6,000 Max. working width mm: 230 Max. working height mm: 150 Spindle diameter: mm 40 Central lubrication inclusive: - Soundproof booth -Tools CE Marking

SPECIFICATIONS Pre-planer mm: 2000 Number of spindles: 5 Spindle configuration: I below - week 5,5 II - III right- left - KW 7,5 IV above - week 5,5 V below - week 4,0 Cardan shaft Speed-controlled drive KW: 4.0 Spindle diameter mm: 40 Revolutions per minute: 6,000 Max. working width mm: 230 Max. machining height mm: 120 Complete with: - Soundproof cabin - Grooved table -Tools CE-compliant

SPECIFICATIONS: Planer: 2500 mm Machinable width: max. 210 mm Working height: max. 150 mm Cardan shaft drive Drive shaft power: 5.5 kW Spindle configuration: I. Spindle: Bottom (4 kW) II. Spindle: Right (4 kW) III. Spindle: Left (5.5 kW) IV. Spindle: Right (4 kW) V. Spindle: Top (4 kW) VI. Spindle: Bottom (4 kW) VII. Spindle: Universal spindle (5.5 kW) With tools.

SPECIFICATIONS: Pre-spindle machine inlet: 2000 mm Working width: 210 mm Working height: max. 120 mm Cardan shaft drive Drive shaft power: 2.2 kW I. Spindle: Bottom (4 kW) II. Spindle: Right (3 kW) III. Spindle: Left (4 kW) IV. Spindle: Right (5.5 kW) V. Spindle: Above (5.5 kW) VI. Spindle: Above (5.5 kW) VII. Spindle: Bottom (4 kW) With tools

TECHNICAL DATA: Working width mm: 230 Planing height mm: 120 Infeed table length mm: 3500 Number of spindles: 6 Spindle configuration: 1 B: 5,5 KW 2 R: 7,5 KW 3 L: 7,5 KW 4 T: 7,5 KW 5 B: 5,5 KW 6 T: 5,5 KW Spindle diameter mm: 40 Feedrate m/min: 6-36 Rotation speed max rpm: 6.000 Soundproofing cabin: Yes Feeding magazine Weinig - PHV - 2004

WEINIG moulder model UNIMAT 17N with 8 shafts: -useful working measures 170x120mm -gimbal towing and pneumatic pressure -variable feed speed -top feed wheel before the 1st shaft -tandem feed groups in front of the 2nd and 4th shaft -2000mm long entrance plane -with SACOT automatic loader -manual lubrication pump of the table Tree layout: 1-under 2-right 3-left 4-right 5-above 6-under 7-above 8-Universal

WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Length of the inlet table: 2 m The machine has a total of 9 spindles with the following configuration: 1. Lower spindle / dressing spindle : 5.5 kW 2. Right spindle /  ...

WEINIG planer and moulder model Unimat 22 A Equipment: - Package - Lifting table (no pit required) - automatic stacking strip removal - Rubberized inclined conveyor - Rubberized separation - Longitudinal conveyor for planing.- Moulder - Unimat 22 A with soundproof cabin - 2nd operating unit - Manual acceptance Weinig Planer.- Automatic throat machine, technical data: Spindle arrangement: U - R - L - O - U Saw Working width: 220 mm Working height: 120 mm Motor power feed: 4 kW Motor power of the working spindles: 4 kW Speed of the working spindles: 6000 rpm. Diameter of the working spindles 40 mm Feed infinitely variable 6 - 32 m/min Diameter of feed rollers (hardened) 140 mm Space requirement line: 12.7 x 5.0 m Spelling mistakes and errors excepted