підкатегорій
(рретій рівень категорії)
Виробник:
(Категорія: 203)
Ньюман моделі S-282-18inch двосторонній гвинтовий голова Planer Тип списку: продається машина Категорія: Planers-Двомісний Виробник: Ньюман Модель: S-282-18inch двосторонній Planer Рік: 1994 Електричні характеристики: 3PH Ціна: $34 900,00 договірна Тип: використовується Умова: дуже добре Розміщення: Локпорт, Нью-Йорк 14094 США Тел.: 716 433 4224 Опис: -Матеріал ємність: 18inch шириною x 6inch товщиною -Найкоротший запас (не butted) 48inch -Топ-Хед: 40 HP 3 600 об/хв прямий привід -Нижня головка: 25 HP 3 600 об/хв прямий привід -15 к. с. Гідра ...
Key data: 4 , 600 mm, 300 mm
ФІНАЛЬНА ЛІНІЯ ДЛЯ ПРЯМОГО КЛЕЮ, ВИГОТОВЛЕНОГО LEDINEK => EUROPLAN 600-4V+4F S60 З МЕХАНІЗАЦІЄЮ ВВЕДЕННЯ ТА ВИХОДУ Орієнтація: права машина Цей чотиригранний важкий брувальник для деревини був спеціально розроблений для стругання будівельних дерев'яних і гляльових балок. Машина підходить як для зеленого, так і сушеного в печі деревини. Машина оснащена гідрорезальними головками. Регулювання зрізу на першій ріжучій головці керується мотором. Значення задання відображається на операційній пане ...
Number of spindles: 6 St.Working width: 230 mmWorking height: 140 mmFeed motor: 4 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Engine 7.5 Kw, with emergency stop. Terminus planer shaft with 4 quick-change reversible blades. Planing table wide 630 mm x deep 1000 mm. Feed speed 6-12 meters per minute. Digital height adjustment and readout and automatic high and low. A terminus planing shaft is already low-noise, but the machine is also sound-insulated. The inlet and outlet roller are rubberized for smooth passage. Equipped with roller conveyor scissor model, size 730 x 2870 mm. 14 bearing rollers of 650 mm and a Intermediate size of 200 mm per roll Auction-ID: A1-48994-10
Motor 5 Kw, with automatic star / triangle, emergency stop , with thermal motor protection. Planer shaft 120 mm x 500 mm with four planer blades, Tiltable with a quickly adjustable \"Martin\" guide. Table tops can be pulled out for profiling with profile knives. With magnetic chisel adjustment blocks and a Harwi safety cap Auction-ID: A1-48994-8
With three feed shaft extensions for wide wood with additional steel toothed feed wheels. The air pressure of the front and rear steel feed wheels can be infinitely regulated from 0 bar to 6 bar. Digital adjustment in height and width and readout of 100-200 programmable planing dimensions. Tersa planer heads with 4 quick-change blades per head. Automatic oscillation of the width axis for falling widths of wood. 4 to 25 m/min Infeed table 2,000 mm long, with extra pressure pieces for thin wood, and extensions for the infeed shafts. Spare set of feed wheels, 2x spare belts, 2x spare gas springs. The preset planing width sizes can sometimes have a deviation of max. 0.2 mm. At the pendle axle, the light-sensitive eye does not work properly. This is solved by bridging the eye with the on/off switch H. The pendle axle is completely in order and automatically goes out when you press woo ...
vertical flat bench ironer, 1.5 Kw, planing head D=120 mm H=100 mm. With three HM blades. Guide 860 mm, depth of quick adjustment from 0 mm to 6 mm. Auction-ID: A1-48994-40
Number of spindles: 5 St.Working width: 250 mmWorking height: 150 mmLength of the planing table: 2000 mmFeed motor: 4 kWFeed speed: 6-24 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Planer CHAMBON R233 Used machine Revised Year:1988 Technical characteristics: Electric up/down Star/Triangle Start Emergency stop Working width: 500 mm HSS Irons Auction-ID: A1-49230-1
Feed system: multiple feed rollers to automatically advance the wood pieces Transmission: mechanical chain and sprocket drive Inlet roller: ribbed metal roller to ensure the entrainment of the wood Visible elements: smooth rollers, ridged roller, anti-kickback/claw system and drive mechanism Auction-ID: A3-46152-35853
Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.control: Memory-Funktion Weinig Powermat 500 with grooved table----------------------------------The machine arrives at the warehouse and is cleaned and fully inspected.Brief Summary:----------------------------------- 5 Spindles- 8,000 rpm- Grooved table for short or difficult-to-guide workpieces, coatedwith Marathon PowerCoating- One driven roller in the outfeed table, hardened: 210 mm wide- Left and top spindles controlled for width and height- Quick-release spindle nutDetailed Description:---------------------------------------------------------- -------------Technical Data:Working width: 20-230 mmWorking height: 8-120 mmNumber of spindles: 51st Spindle - bottom----------------------------------------------- Motor with brake: 7.5 kWSpindle dia ...
Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 3 kWFeed speed: 5-24 m/min.total power requirement: 27 kwDimensions (L/W/H): 3900 x 2200 x 2000 mmweight of the machine ca.: 2500 kgWeinig four-side planer Profimat 23 window version withglazing bead removal,ATS control and program control-------------------------------------Machine will be renovated and functionally checked!Technical data summary(please inquire about any additional accessories included)-------------------------------------Generally--------------- ----------------------> Working width: 230 mm> Working height: 120 mm> Number of spindles: 6 pieces.> Dressing table length: 2500 mm> Feed speed: 5-24 m/min> Total power requirement: 27 kW> Dimensions: 3900 x 2200 x 2000 mm> Machine weight, approx.: 2500 kgSpindle arrangement-------------------------------------> ...
Working width: 410 mmLength of the planing table: 1450 mmNumber of knives: 4 St.Motor output: 4 kWDimensions (L/W/H): 2650x850x1100 mmweight of the machine ca.: 750 kgSCM Surface planer F 410 N-----------------------------Technical manufacturers description:Planing width: 410 mmTotal table length: 2600 mmTable height: 855 mmFeed table length: 1450 mmAluminum planing fence swivels up to 45°Planing fence dimensions: 1100 x 170 mm4-knife planing shaft diameter: 120 mmKnife shaft speed: 5000 rpmMotor power: 4 kWTERSA monobloc one-way reversible cutterheadSCM dressing protection device integrated in machine stand120 mm diameter extraction nozzleManual star-delta switchMotor protection switch, undervoltage releaseLockable main switchAutomatic motor brakePivoting auxiliary fence-----------------------------Price of the above machine on request!-----------------------------(technical data accor ...
Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 3 kWFeed speed: 5-24 m/min.Dimensions (L/W/H): 3900 x 2200 x 2000 mmweight of the machine ca.: 2500 kgWeinig Profimat 23 Four-Sided Planer – Window Version(With glazing bead separation feature, or usable as a grooving spindle)ATS Control and Program Control-------------------------------------Technical Specifications Summary(Please inquire regarding any additional accessories that may be included)-------------------------------------General----------------- -------------------> Working width: 230 mm> Working height: 120 mm> Number of spindles: 6> Infeed table length: 2500 mm> Feed motor: 3 kW> Feed speed: 5–24 m/min> Total power requirement: 27 kW> Dimensions: 3900 x 2200 x 2000 mm> Machine weight (approx.): 2500 kgSpindle Arrangement------------------------------------ ...
Number of spindles: 6 St.Working width: 240 mmWorking height: 200 mmLength of the planing table: 2500 mmFeed speed: 6-36 m/min.Dimensions (L/W/H): 4900x1700x2000 mmweight of the machine ca.: 3500 kgControl: SCM Mobile 10 SCM Superset NT PLUS Comp. 31 for window production-----------------------------------------------The machine is in process of partial reconditionning at our facility at the moment.Highlights:- Machine with 6 spindles (2 with HSK mounting)- Spindle speed 8,300 rpm- Working width 240 mm, working height 200 mm- Electronic horizontal and vertical spindle positioning- PRL equipment for glazing bead separation- Air-cushion table- Touchscreen controlTechnical Data:Working width: max. 240 mm (kit for min. width 15 to 25 mm)Working height: max. 200 mmFeed speed: infinitely variable 6 to 36 m/min via inverterInfeed table: length 2,500 mmMachine weight: approx. 3,550 kgDimensions: ...
Technical details Configuration: 5-spindle machine Spindle layout: - Bottom spindle (jointing) - Right spindle - Left spindle - Top spindle - Bottom spindle Working capacity: - Working width: 20–230 mm - Working height: 10–160 mm Feed system: - Feed speed: 5–40 m/min - Feed motor power: 5 kW - Electronic infinitely variable feed adjustment - Pneumatic lifting/lowering of feed roller before first spindle - Quick-change feed rollers - Serrated feed roller Electrical specifications: - Supply voltage: 400 V - Frequency: 50 Hz - IE3 Premium Efficiency motors Control system: - Memory Plus touchscreen control - Storage of axial and radial spindle positions - Electrically adjustable pressure elements - Guided machine setup Right spindle: - Motor power: 11 kW - Spindle diameter: 40 mm - Speed: 7000 rpm - Axial movement: 80 mm - Maximum profiling depth: 35 mm Left spindle: - Motor power: 1 ...
Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled------------------------------------------------------------ -----------The machine renovated and functionally checked !Short summary:-------------------------------------------------------------- ---------6 spindles with 8,000 rpm5 x HSK/PowerlockAxial and radial CNC adjustment of the spindles via controlCNC - controlled adjustment and positioning of the feedDetailed description:---------------------------------------------------------- -------------Technical specifications:Working width: 20-230 mmWorking height: 8-120 mmNumber of spindles: 61. Tool holder - below------------------------------------------------Motor with brake: 5.5 kWSpindle diameter: 40mm ...
Number of spindles: 5 St.Working width: 230 mmWorking height: 160 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-24 m/min.Control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER -------------------------------LIKE NEW, showroom machine !- 5 spindles: bottom, right, left, top, bottom- Speed: frequency-controlled 4,000 - 6,000 rpm- Width and height motor-controlled:left spindle radialupper spindle axial- Feed carriage motorized adjustmentTECHNICAL DATA in Detail-------------------------------Working width (for tool diameter 125-163 mm): 15-230 mmWorking height (for tool diameter 125 mm): 10-160 mm(Tool diameter up to 163 mm): 10-160 mmMin. workpiece length:single piece: min. 800 mmpiece by piece: min. 300 mmThe processing of the work pieces is depending on thefollowing operating parameters:material, wood moisture, tools, diameter of the chip removaland f ...
Number of spindles: 5 St.Working width: 240 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-36 m/min.Weight: ca. 3500 kgcontrol: SCM Control 10 SCM Superset NT with workpiece return----------------------------------The machine is in cleaning and completely checking process at the moment.Brief Summary:----------------------------------- 5 spindles- Powerful motors- Left and upper spindles controlled for width and height- With workpiece return to the operator1st spindle----------------------------------First lower horizontal spindleMotor with brake 7.5 kWDiameter 40 mmSpeed 6,000 rpm2nd spindle----------------------------------First right vertical spindleMotor with brake 7.5 kWDiameter 40 mmSpeed 6,000 rpmT-set quick-clamping system3rd spindle----------------------------------First left vertical spindleMotor with brake 7.5 kWDiameter 40 mmSpeed 6,0 ...
Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Control: Memory-Funktion Weinig Powermat 600 Compact--------------------------------------------------------------- -------The machine has been cleaned and fully inspected.Brief Summary:----------------------------------- 5 Spindles- Powerful Motors- Left and top spindles controlled for width and heightDetailed Description:---------------------------------------------------------- -------------Technical Data:Working Width: 20-230 mmWorking Height: 10-120 mmNumber of Spindles: 51st Spindle - Bottom-----------------------------------------------Motor with brake: 7.5 kWSpindle diameter: 40 mmSpeed: 6,000 rpmTool Circle: 125-145 mmTool Circle for Rebating Cutter: 130-160 mmAxially Travel: 5 mmRebating DeviceMarathonCoatine for table insert in front of ...
Number of spindles: 9 St.Working width: 240 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 7,5 kWWorking speed: 6-36 m/minweight of the machine ca.: 6500 kgControl: CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015, currently undergoing partial recondtionning in stock------------------------------------------------------------Summa ry:- 9 spindles (including 4 x HSK 85 S)- Electronic horizontal and vertical positioning- 8,300 rpm- SCM Set-up- SCM T-Set- Includes workpiece infeed magazineWorking dimensions:- Maximum working width: 240 mm- Minimum working width: 25 mm (reducible to 15 mm via installed special kit)- Maximum working height: 120 mm- Minimum working height: 10 mm (reducible to 6 mm via installed special kit)Special working cross-section equipment: Equipped with a special kit forextremely small minimum cutting dimensions of 15 x 6 mm.Infeed ta ...
Number of spindles: 6 St.Working width: 230 mmWorking height: 150 mmLength of the planing table: 2000 mmFeed motor: 5,5 kWFeed speed: 7-36 m/min.Kuper SWT 23 XL-6 Four-Sided Planer-----------------------------------------------Machine fully functional tested!... Working width min/max: 18 - 230 mmWorking height min/max: 8 - 150 mmSpindle configuration:1st Spindle - bottom-----------------------------------------------Power: 5.5 kWSpeed: 6,200 rpm, incl. brakeSpindle diameter: 40 mmSpindle length: 240 mmPulley diameter: 160 mmAdjustment: axial and radial, manual2nd Spindle - right------------------Power: 5.5 kWSpeed: 6,200 rpm, incl. brakeSpindle diameter: 40 mmSpindle length: 160 mmPulley diameter: min. 110 mm - max. 200 mmAdjustment: axial and radial, manual, via mechanical digital displayAdjustment: vertical 35 mm below Table3rd Spindle - Left------------------Power: 7.5 kWSpeed: 6,200 ...
Dimensions (L/W/H): 2650x950x1850 mmWeight: 2100 kgTotal power requirement: 15 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 510 mmLength of the planing table: 2.870 mmNumber of knives: 4 St.Motor output: 4 kWDimensions (L/W/H): 2.900 x 1.500 mmweight of the machine ca.: 870 kgturning speeds: 5.000 U/min: Tersa : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 3 kWFeed speed: 5-30 m/min.control: Powercom Weinig Powermat 500 (Window Version for window producers)--------------------------------------------------------The machine will be a partial renovated at our warehouse prior to delivery.The interior view photos of a similar machine from our archive serve to illustrate how the machine will be renovated.Technical Summary:--------------------------------------------------------- 6 spindles, 5 of which are PowerLock- 8,000 rpm- Large PowerCom control system- Spindles 2, 3, and 4: CNC-controlled axial adjustment- Spindles 2, 3, 4, and 5: CNC-controlled radial adjustment- Window package for glazing bead separation:pneumatic cycling for right and top spindlesfor bead separationDetailed Description:------------------------------------- ...
Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled------------------------------------------------------------ ----------This machine is currently being refurbished at our facility!Pictures taken before dismantling and currently during the processing phase!Brief Summary:-------------------------------------------------------------- --------- 5 spindles with 8,000 rpm- 4 x HSK/Powerlock- Axially and radial CNC adjustments of the spindles via control- CNC-controlled adjustment and positioning of the feed- Table tops with guide blades at spindles 2 and 3.- Includes Weinig/Neumann RF 15 return conveyor systemDetailed Description:---------------------------------------------------------- -------------Technical ...
Working width: 630 mmWorking height: 3-310 mmMotor output: 7,5 kWNumber of knives: 4-TERSA St.Feed speed: 6-20 m/min.Vertikal stroke: elektrisch FIMAL thickness planer type SP 63 A Demonstration Maschine-----------------------------------------------------NEW MACHINE Partnership EditionTechnical data / basic equipment:------------------------------------------------------ 4-knife V-shaft, d = 120 mm, speed 4,800 rpm.- Table height adjustment via 4 trapezoidal spindles- chip removal up to 8 mm- Min. / Max. working height: 3/310 mm- Min. workpiece length: 250 mm- Suction nozzle 150 mm- Electrics and protections in accordance with CE standards- Planing width: 630 mm- Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch- Infinitely adjustable feed speed from 6 to 20 m/min.- Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard wi ...
Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmfeed: 5-25 m/minDimensions (L/W/H): 4700/1800/1100 mmweight: ca. 4.000 kgCASOLIN MEGA 230/6 four-side planer------------------------------------------6 spindles, with touchscreen control.Width and height controlled.Spindle arrangement:1st spindle: bottom, 40 mm diameter, 6,000 rpm, 5.5 kW2nd spindle: right, 40 mm diameter, 6,000 rpm, 11 kW together with3rd spindle: left, 40 mm diameter, 6,000 rpm4th spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW5th spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW6th spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kWMachine without machining tools.The additional screen on the front of the machine is not included in the scope of delivery (is part of the window system).Machine already dismantled and stored.(technical information according to the manufactu ...
100 € 
