планировочные машины подержанные на продажу (514)

Key data: 410 mm, 240 mm, 4 kW

SCM 2041 FS Строгальный и рейсмусовый станок Производитель SCM Италия АБ 66989 Код 110830 Год выпуска ок. 1994, из школы в хорошем состоянии 3 Строгальный вал Частота вращения строгального вала 5000 об/мин Строгание: Длина стола 2000 мм Ширина строгания 410 мм Длина опорного стола 1040 мм Длина опорного стола 910 мм Максимальная толщина стружки: 10 мм Забор для швартовки поворотный 0 - 45 Регулировка стола для строгального станка с поворотным рычагом Виброзащита нажимного звена Строгание по толщине: � ...

Key data: 630 mm, 230 mm, 5 kW

Гебр. Комбинированная строгательная машина КЁКОЛОН HK 63 Точный год неизвестен Мощность мотора 5,5 кВт Нож для рубания с 2-ножевым валом Регулировка высоты стола с помощью ручного колеса Индикатор высоты с помощью прибора на ручном колесе Максимальная ширина строгания: 63 см Максимальная высота строгания: 230 мм 2 скорости подачи: 10+16 м/мин. Сочленённые напорные балки Ролик с подача связей Стальной вытяжной ролик Длина туалетных столиков: 210 см Длина таблицы толщины: 120 см Мотор тормо� ...

Type MB7023 Maximum working width 230 mm Minimum working width 20 mm Maximum working thickness 180 mm Minimum working thickness 8 mm Shaft diameter 40 mm Feed speed 5–30 m/min. Spindle speed 6000 rpm. 7 spindles B-4kw, R-5,5kw, L-5.5kw, T -7.5kw, T-5.5kw R-5,5kw, B-5,5kw Side motors of grinding brushes 2.2/2.2 kW Top motor of grinding brushes 2.2 kW Total power 52.2 kW Air pressure 0.2–0.3 mpa Width of side sanding brushes 200mm Width of top sanding brushes 300mm Transport dimensions 3750x1600x1500mm Weight 4200 kg Price 36880 Eur (EXW Jonava, Lithania)

Number of spindles: 9 St.Working width: 230 mmWorking height: 120 mmeinig Unimat 23, 8 spindles + universal spindle--------------------------------------------Width and height are motorized/controlledIncludes Haberkorn workpiece return systemMachine can still be viewed in operation for a short time!Spindle configuration--------------------------------------------Spindle 1: bottomSpindle 2: rightSpindle 3: leftSpindle 4: rightSpindle 5: leftSpindle 6: topSpindle 7: bottomSpindle 8: topSpindle 9: universalTechnical specifications according to the manufacturer – no guarantee provided!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St.Working width: 230 mmWorking height: 150 mmLength of the planing table: 2000 mmFeed motor: 4 kWFeed speed: 6-24 m/min.LEADERMAC Type LMC 623 COMPACT Four-Sided Moulder--------------------------------------------Sold on behalf of a client!Working width (min. – max.): 15 – 230 mmWorking height (min. – max.): 10 – 150 mmWidth and height are motorized/controlled6 spindles, spindle diameter 40 mm, 6,000 rpmSpindle configuration--------------------------------------------Spindle 1: bottomSpindle 2: rightSpindle 3: leftSpindle 4: topSpindle 5: topSpindle 6: bottomTechnical specifications provided by the manufacturer – no guarantee!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St.Working width: 230 mmWorking height: 160 mmFeed motor: 4 kWDimensions (L/W/H): 4400 x 1800 x 1500 mmWEINIG Unimat 23 Automatic Planing and Grooving MachineFor sale on behalf of a customercustomer is still working on it, machine can be visited--------------------------------------Manufacturer’s Technical Specifications:Working width: 20–230 mmWorking height: 6–160 mmNumber of spindles: 6Motor power per spindle: 5.5 kW (7.5 PS)Feed motor power: 4.0 kW (5.5 PS)Spindle speed: 6,000 rpm------------------------------- -------Planing table length: 2 m1 adjustment gauge2 planing heads, 240 mm3 brake units are defective, these could be reinstalled by an electrician.--------------------------------------Additional technical data (former order confirmation) attached--------------------------------------Price of the above-mentioned machine upon request!---------------- ...

Код: 0503 Бренд: SAC - ИТАЛИЯ Модель: RS 53 Автоматический строгалка толщины для столярных мастерских, мебельных фабрик, индивидуальной мебели, лесопилок, дерева, композитных материалов, пластмасс Технические данные Рабочая ширина мм 530 Максимальная рабочая высота мм 240 Минимальная рабочая высота мм 3 Максимальная глубина разреза мм 8 Ножи No 4 Скорость подачи мт/мин: 5 - 7,5 - 10 - 15 Мощность двигателя 5,5 Диаметр всасывающего соединения мм 140 Общие размеры мм 930 x 1050 x 1100 ч Вес 970 к�

Capacity: 230 x 130 mm.Spindles: 7Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kWspindles 2, 3, 4 and 5 are 8000 tr/minstraight jointer on 2nd bottom spindleCardan shaft drivePneumatic pressuresIntermediate driven feedroller for short pieces0,8 m infeed straightening tablemanual bed lubricationSpindle diameter: 50 mm.5 driven rollers in tableFeed: 6 - 36 m/min, motor 7,5 kWmotor height adjustment

Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW– Fence / Near 11 kW – Top 7,5 kW – Bottom 5,5 kWSpindle speed 6000 rpmVariable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mmDriven table rollerMechanical/digital read-out Centralised lubrication CE sound/safety hoodInterior lightHopperfeed EM 11, upt to 60 cycles/minWorkpiece length: 350 to 3000 mmWorkpiece width: 20 to 230 mmWorkpiece thickness: 12 to 70 mmAir requirement: 8 bar, connection DN8Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/sTooling not included

Capacity: 230 x 130 mm.Number of shafts: 9Bottom 7.5 kW, right 7.5 kW, left 7.5 kW, right 7.5 kW, left 7.5 kW , top 7.5 kW, bottom 7.5 kW, top 7.5 kW, bottom 7.5 kWKardan drivePneumatic pushersFront surface tableFeed rollers for short workpiecesManually operated pump for bed lubricationShaft diameter: 50 mm.Powered rollers in the tableFeed: 6 - 36 m/minMotorized height adjustment

width of the table: 400 mmlength of the table: 2450 mmfence can be tilted4 knive cutterblockmotor 3 kW

Maximum feed width: 800 mmMaximum feed height: 230 mmVariable feed speed: 8 - 20 m/minPlaning head with 4 bladesExtraction diameter: 200 mmMotor 5.5 kW

Useful width: 520 mmMax pass: 300 mm Motorised table rise and fallAnti-kick-back safety device4-knife cutterblockMotor 4 kW

Capacity: 180 x 100 mm.Spindles: 4Bottom with referencing 4kW, fence 3kW, near 3kW, top 4kWMotorised thickness adjustment4 cutterblocks Chaindrive 6 - 12 m/minInfeed table 1m70. long

Capacity: 260 x 130 mm.Spindles: 5Shaft diameter 40 mmBottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kWCardan shaft drivePneumatic pressuresFeed speed variable 5 - 24 m/min, motor 3 kWMotorised height adjustment of top presssure beamInfeed table 2200 mm lengthtools not included

Four-sided planerWorking height: 740-750 mmMax working width: 305 mmMin working width: 50 mmMax workpiece height on 2 sides: 310 mmMax workpiece height on 4 sides: 160 mmMin workpiece height: 17 mmFeed speed steplessly adjustable: 10-60 m/minmotors: bottom 11 kW, top 11 kW, right 7.5 kW, left 11 kWfeed motor: 7.5 kWmotor height adjustment: 1.5 kWspeed 5,500 rpmdriven top and bottom feed rollers

Capacity: 230 x 125 mm.Number of axes: 4Axis diameter 40 mmBottom 6.3 kW, right/left 7.5 kW, top 7.5 kWMobile axis for various widthsPneumatic pressersVariable feed speedMotorized height adjustment of the top barFeed table 2000 mm lengthKnife heads included

Short infeed table (700 mm) with 2 driven feedrollers above and 1 driven feedroller in the infeed tableIn the machine 4 driven feedrollersHardened table (with exception of the infeed table)Separate controll cabinet and electrical cabinetAutomatic bed lubricationPneumatic pressuresOutfeed table with height adjustment 0/0,5/1 mmSound enclosure with electromagnetic securityCapacity: width 20 - 230 mm x height 8 - 160 mm (with cutting circles resp. 140 and 163 mm)Feedspeed: 6 - 36 m/min, motor 7,5 kWNumber of spindles: 8Spindle diameter: 50 mmSpindle speed: 6000 rpmBottom 7,5 kW, outboard bearingFence 7,5 kWNear 11 kWFence 11 kWTop 15 kW, outboard bearing, straight jointerBottom 22 kW, table prepared to take wooden inserts in case of ripping (tool diameter up to 250 mm)Top 11 kW, table prepared to take wooden insertsBottom 11 kW, outboard bearing, straight jointer

Capacity: 230 x 120 mm.Spindles: 4bottom 4 kw fence and near 5,5kWtop 5,5 kw Spindle diameter 40 mm Cardan shaft drive, motor 2,2 kWVariable speed 5 - 22 m/minPneumatic pressuresInfeed table 2 m lengte Waxilitpump for bed lubrication, manual Safety hood

Capacity: 220 x 120 mm.Spindles: 5Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kWSpindle diameter: 40 mmMotorised thickness adjustment, motor 1,5 kW digital displayInfeed table1700 mm longSiko reading on the shaft positioningProtective hood with electrical contactExtension 5 x 140 mm

Second-hand Format 4 Type Plan 51 surface planer for planing timber workpieces. Technical data: Motor: 10 kW Blade shaft: Reversible blades Z4 Working width: 510 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Manufacturer: Otto Martin Maschinenbau, Ottobeuren Model / Type: T 51 Machine number: V 105846 Year of Make: 1979 Machine Type: Surface Planer / Dressing Machine Working width: approx. 510 mm Voltage: 380 V Frequency: 50 Hz Current type: 3~ three-phase current Rated current: 9.8 A Solid dressing tables in cast iron design Adjustable dressing fence Hollow/pointed joint adjustment available Display for hollow/pointed joint available Foot operation / pedal available Extraction connection available Belt and chain drive Protection/auxiliary stop available Auction-ID: A1-50373-8017

Manufacturer: J. A. Bäuerle Maschinenfabrik, Oberkochen Type: 125/02 Machine number: 53105388 Machine type: heavy thickness planing machine Working/planing width: approx. 610 mm Max. planing height: approx. 200 mm Planing shaft: strip knife shaft, Z4 Feed: approx. 7–14 m/min Engine power: 4.4 kW / 6 hp Engine speed: 2,870 rpm Electrical connection: 380 V / 50 Hz Rated current: 10 A Feed system: feed and pull-out rollers Height adjustment: mechanical via handwheel Extraction: Extraction hood/duct available Construction: heavy cast/steel construction Machine weight: approx. 1,150 kg Auction-ID: A1-50373-80181

SAC RS 530 industrial thicknesser for professional use in joinery workshops and wood processing industries. Working width 530 mm, working height 240 mm. Four-knife cutterhead (knives 530 mm) driven by a 5.5 Hp motor. Motorised table height adjustment on a cylindrical column. Two feed speeds with a grooved (serrated) infeed roller. Freely adjustable pressure roller on the table. The machine has been fully serviced and is ready for work. Further details not listed here (serial number, year of build, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Fully serviced, ready to work Auction-ID: A7-50988-18

63 cm wide 4 blades electric high/low Auction-ID: A3-46137-5522

Reconditioned cast-iron Origlia thicknesser, suitable for joinery workshops and wood processing industries. Working width 400 mm, working height 200 mm. Three-knife cutterhead, single feed speed, 380 V motor. The machine has been fully reconditioned. Exact model and further technical specifications (motor power, serial number, year of build, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Fully reconditioned, delivered with 1 year warranty like the new machines Auction-ID: A7-50988-19

Weinig Unimat 23 E + Uniplan 23 planing line, including a return conveyor. An NC-controlled line for planing and profiling window scantlings, including glazing bead cutting or other planing tasks, with automatic return of the workpieces to the operator. Technical data: Spindles: 4 + 2 Working width: 230 mm Working height: 120 mm Spindle 1: 7.5 kW / 50 mm / 8,000 rpm Spindle 2: 11 kW / 50 mm / 8,000 rpm Spindle 3: Shared motor with spindle 2 / 50 mm / 8,000 rpm Spindle 4: 7.5 kW / 50 mm / 8,000 rpm Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Feed rate: 5–24 m/min Control: Nexus PC control system NC axes: Unimat 2 & 3, Uniplan 1 Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig Profimat 23 automatic planing and moulding machine for four-sided planing and profiling of timber, with a mobile spindle. Technical data: Spindles: 5 Spindle 1: Bottom / 5.5 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 7.5 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm Working width: 230 mm Working height: 120 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

SCM ‘Profiset 60 EP’ four-sided planer, in as-new (second-hand) condition, for professional use in woodworking. The machine was only switched on once for a test run and has never been used since. Technical data: Spindle 1: Bottom / 4 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 4 kW / 40 mm Spindle 5: Universal / 4 kW / 40 mm Spindles: 5 Working width: 230 mm Working height: 120 mm Feed: 3 kW Planing table length: 2,000 mm Condition: Neuwertig Location: Tauberbischofsheim, Germany