Planing and moulding machine Costa Euro 23/F for four-sided planing and profiling. • Spindles: 6 • Spindle arrangement: Bottom (7.5 kW) – Right (7.5 kW) – Left (7.5 kW) – Top (9.2 kW) – Top (9.2 kW) – Bottom (approx. 7.5 kW) • Feed: max. approx. 27 m/min • Working width: 230 mm • Working height: 120 mm • Spindle diameter: 40 mm • Dressing table length: 1,500 mm.
Catalog No. 6822 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 5 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm; (2nd and 3rd spindle) 7.5kW 4) horizontal top 230mm 5.5kW 5) universal spindle 230mm, right/left rotation adjustment 5.5kW - all spindles adjustable up / down, right / left - all spindles equipped with an electric brake - spindle diameter 40mm - from above, 4 metal, toothed introductory rollers - 3 pulling rollers from above, rubber, smooth, including 2 double - from the bottom, a rubber roller, pulling - side pressure from below - 2 types of feed speed - feed motor 1.2 kW - electric setting of planing thickness - length of the introductory tabletop 2500mm - locked in the cabin - central lubrication of the countertop - diameters of the extraction spigot 150mm, 4x120mm - ...
CATALOG NUMBER 6651 TECHNICAL DATA - max width of the workpiece 220mm - max height of the workpiece 120mm - 4 spindles: 1) horizontal bottom 220mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal upper 220mm 5.5kW - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - from above, 4 introducing rollers, toothed, including 2 double ones - from above, 1 pulling roller, smooth, rubber - rubber, pulling roller at the bottom - pneumatically pressed rollers - feed on cardan shafts - 1.1kW feed motor - 0.37kW lifting motor - electric adjustment of the planing thickness - length of the introductory top 1980mm - side pressure - smooth adjustment of the feed speed 8-16m / min - central lubrication - diameter of the extraction port 5x140mm - locked in the cabin - dimensions length / width / height 3400x1500x1700mm - wei ...
I sell the four-side planer Futura P-MAX 23/5+UNIV, built in 2008. 6 Spindle: bottom - right - left - top - bottom - universal Electronic programming for working width, working height and feed speed. Element max. 230x170mm ! All 6 spindles 6000 rpm. Material prints for short elements. Weight 2500kg. 1-zone pneumatic material pressure system for feed Fully operational. Available the same. Exhibition machine, has worked very little !
I sell the four-sided planer FUTURA PRG24/7, Year of construction 2005. Element size max. 260x150mm ! 7 Spindle Configuration: Bottom 7,5kW (10HP) / 6000 rpm Right 7,5kW (10HP) / 6000 rpm Left 7,5kW (10HP) / 6000 rpm Top 7.5kW (10HP) / 6000 rpm Top 6.75kW (9HP) / 6000 rpm Right 6,75kW (9HP) / 6000 rpm Universal 7,5kW (10HP) / 6000 rpm Combined power 62KW / 102 A Weight 4500kg. Element size max. 260x150mm ! 2 FABA planing heads with spiral knife fi.140x260x40mm included in the price. Electronic programming for working width, working height and the height of pressure zone Feed speed adjustable with inverter. 2-zone pneumatic material pressure system for feed Available the same.
Part Number 6322 TECHNICAL DATA - max width of the workpiece 260mm - max height of the workpiece 160mm 6 spindles: 1) horizontal bottom 260mm 7,5kW 2) vertical right 160mm 7,5kW 3) vertical left 160mm 7.5kW - 3 spindles electrically adjustable front/rear 0.4kW 4) horizontal top 260mm 11kW - 4 spindles electrically adjustable up/down 0.4kW 5) horizontal bottom 260mm 7,5kW 6) universal 230mm 7,5kW - universal spindle electrically adjustable up/down - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 1,2,3,4,5 50mm - universal spindle diameter 40mm - from above 6 pulling, toothed, metal, torsional introductory shafts, including 2 double - from above 5 pulling leads shafts, rubber, smooth including 3 double - from the bottom from the side of the pressure on the inlet - from below 2 pulling, metal, toothe ...
Four side planer Griggio G240 P/5U for wet Maximum planing width 240mm Maximum planing height 160mm Number of spindles 5 Spindle arrangement Bottom Rights Left Mountain Universal Drive: in the table Infinitely adjustable feed on the inverter Year 2007 Weight: 4060 CE Certificate Net price
CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...
Gubisch Type 147 4-Side planer Planing width 180 mm Planing height 150 mm Feed stepless with 7 spindles of which a universal spindle with length dressing table Drive 34.6 kW with lots of tools, planing knives, etc. with planing heads and several groove and spring sets at least 4 planing heads, with chamfering knife and spacer discs
Four-side planer / profile milling machine Fabr. Gubisc Model: 172/1K+R Year of construction: 1981 Planer width: 170mm 5 spindles
Four-side planer Gubisch Four-way planing machine Type: CH 180 Year of construction: 1993 Planer width min. 25 mm – max. 180 mm Planing height min. 10 mm – max. 120 mm Length of the dressing table 2350 mm Spindle revolutions 6,600 rpm Feed speeds 6 and 12 m/min. 4 waves: 1. Bottom 5.5 kW 2. right and 3. left via 1 motor 7.5 kW driven 4. Top 5.5 kW Engines braked with lubricant pump with soundproof hood Including planing heads Dimensions 3750 mm x 1400 mm x H 1500 mm Weight 1.550 kg
Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.
Order No. 6764 TECHNICAL DATA - max width of the workpiece 180mm - max height of the workpiece 120mm 4 spindles: 1) horizontal lower 180mm 3.7kW 2) vertical right 120mm 3.7kW 3) vertical left 120mm 3.7kW 4) horizontal upper 180mm 5.5kW - 30mm spindle diameter in advance: - 4 introducing rollers: pulling, toothed, torsion, including one double - rubber pulling shaft - roller from the bottom, pulling rubber, single out - 2 clamps on the side - locking of spindles - feed on cardan shafts - 2 feed speeds on the switch - 1.1kW feed motor - electric adjustment of the planing thickness to 0.20kW - length of the introductory top 2070mm - diameter of the extraction port 1x140mm, 2x120mm, 1x160mm - dimensions length / width / height 3200x1320x1330mm - weight 1100 kg - Italian production - unpainted - used planer, very good condition Net price: PLN 24900 Net price: ...
The four side Planers H + K Quadroplan 220 is in good condition, ready to use. Hobelbrite 220 mm Planing height 140 mm 1 set below 2. Add in right 3. width left 4. thickness shaft, top 5. Universal spindle 360 ° L x W x H = 4500 mm x 1900 mm x 1700 mm Weight 3000 kg Engine No. 03023 Voltage 400 V Nominal current 62 A Frequency 50 Hz changes, errors, prior sale reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Four-side planer, profile milling machine Fabr. Harbs Model: 200/10 Baujajr: 1978 Planer width: 200mm Equipment: 9 spindles + 1 universal spindle
Four-sided planing machine Harbs 250 x 150 mm 7 spindles 350 hours of uptime 3 m1 dressing table 8 newly rubberized feed rollers Grooved bed The machine is practically as good as new, ready for operation Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12
–Ce – year of production 2000 –DTR TECHNICAL PARAMETERS: planing width 180 mm planing height 120 mm spindle diameter 40 mm tool diameter 125 mm two types of feed speed table top length 1700 mm four upper pulling rollers one smooth pulling steel roller total power 14,1 kW connection diameter 2 x 120 and 2 x 150 mm machine dimensions (L/W/H) 280 / 120 / 150 cm weight 980 kg
• Min working width (finished size): 25 mm • Max working width (finished size): 190 mm • Min. working height (finished size): 8 mm • Max working height (finished size): 115 mm • Min. workpiece length: 300 mm • Spindle speed: 6000 rpm • Spindle diameter: 35 mm • Min/Max tool diameter Horizontal spindles: 100 mm • Min. tool diameter of the vertical spindle right: 100 mm • Max tool diameter of the vertical spindle right: 100 mm • Min. tool diameter of the vertical spindle on the left: 100 mm • Max tool diameter of the vertical spindle on the left: 100 mm • Clamping length Vertical spindles: 110 mm • Clamping length Horizontal spindles: 180 mm • Diameter of feed rollers: 120 mm • Feed table length: 1800 mm • Quick adjustment task table and wing ruler: 10 mm • Diameter of the suction nozzle: 200 mm • mechanical indicators for width and h ...
working width 230mm working height 125mm 5 heads Head arrangement: bottom/right/left/top/universal spindle speed 6200 rpm chrome top toothed roller in the countertop in front of the first head Siemens control head adjustment in two axes pneumatic clamps of pulling rollers spindle diameter 40mm
Number of spindles: 6 St.Working width: 250 mmWorking height: 150 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-24 m/min.weight: 4770 kgDimensions (L/W/H): 4722x1860x1776 mmVierseitenhobelmaschine Kuper SWT XL-6 in Fenster-Versionmit elektronischer Axial- und Radialverstellung der Spindeln.Schwerer Maschinenständer, verwindungsfrei und schwingungsarm.Anzahl der Spindeln: 6Arbeitsbreite: 250 mmArbeitshöhe: 150 mmAbrichttischlänge: 2500 mmSpindeldrehzahl: frequenzgeregelt 4.000 - 8.000 U/minVorschubgeschwindigkeit: 6-24 m/minAusführliche Beschreibung finden Sie in nebenstehender PDF-Datei!(Technische Angaben laut Hersteller - ohne Gewähr!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working width 620mm working height for double-sided planing 200mm working height for four-sided planing 100mm 3 upper pulling gear rollers 4-knife shafts for classic knives feed speed 7/9/11,5/14/18/23 m/min vertical adjustment of side spindles gear roller in the countertop at the material input
– after technical inspection – year of production 1999 – chrome tops – electronic height setting TECHNICAL PARAMETERS: planing width 230 mm planing height 130 mm electric adjustment of the left head electric adjustment of the upper head electronic height adjustment five steel top rollers one top rubber roller spindle diameter 40 mm 1 bottom spindle 5.5 kW 2 right spindle 3 left spindle 7.5 kW 4 upper spindle 7.5 kW tool diameters 160 and 180 mm pneumatic clamps feed on cardan shafts smoothly adjustable feed 6-20 m/min feed motor power 2.2 kW chrome tops pre-table top length 1980 mm connection diameter 4 x 130 mm dimensions of the machine (L/W/H) 340 / 190 / 200 cm weight 2200 kg
working width 230mm working height 150mm electric adjustment of the pressure beam with upper head gear roller in the entrance countertop 5 heads head layout: bottom/right/left/top/bottom spindle diameter 40mm spindle speed 6000 rpm adjustment of heads in two axes infinitely variable feed speed pneumatic clamping of pulling rollers nickel-plated worktop lubrication of the table top
working width 230mm working height 120mm 8 heads head layout: bottom/right/left/right/left/top/bottom/universal gear roller in the countertop at the material input smooth rollers with drive in the table - 3 pcs year of manufacture 2002 table lubrication spindle speed 6000 rpm pneumatic clamps of pulling rollers infinitely variable feed speed adjustment of heads in two axes
Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...
working width 360mm working height 150mm 5 heads Head arrangement: lower/right/left/top/top
– year of manufacture 2004 – chrome tops – electronically adjustable width and height – for wet wood TECHNICAL PARAMETERS: planing width 230 mm planing height 150 mm spindle diameter 40 mm electronic adjustable height electronically adjustable width two rollers in the countertop pulling 1 bottom spindle 5.5 kW 2 right spindle 5.5 kW 3 left spindle 5.5 kW 4 upper spindle 7.5 kW six steel top rollers two top rubber rollers table top length 2000 mm Brakes pneumatic pressure feed on cardan shafts feed speed smoothly adjustable central lubrication machine dimensions (L/W/H) 360 / 220 / 170 cm weight 2200 kg
Catalog No. 6765 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm number of spindles 4: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm - electrically adjustable right/left from the control panel 5.5kW 4) horizontal top 230mm - electrically adjustable up/down from the control panel 7.5kW - all spindles adjustable up / down, right left - spindle diameter 40mm in advance: - introductory pulling rollers, toothed 6 pcs, including 2 double - pulling out rollers, rubber 2 pcs from down: - introductory toothed, metal, torsion roller in the bottom plate + - smooth metal pulling roller - pneumatically adjustable rollers - length of the introductory tabletop (with pneumatic feeder) 3390mm - the ability to work without switching on the pneumatic feeder, - adjustable top / bottom - central lubrication - ...
- year of manufacture 2000 -DTR - electronic height and width adjustment - the ability to save fixed parameters TECHNICAL PARAMETERS: planing width 230 mm planing height 140 mm spindle diameter 40 mm 1 bottom spindle 7.5 kW 2 right spindle 5.5 kW 3 left spindle 5.5 kW 4 upper spindle 7.5 kW 5 bottom spindle 7.5 kW feed smoothly adjustable feed motor power 3 kW electronic height adjustment electronic adjustment of the left head feed on cardan shafts five upper steel pull rollers two pulling rollers rubber top one role in the countertop pulling pneumatic material pressure minimum material length 400 mm pre-table length 2000 mm chrome tables connection diameter 5 x 125 mm Machine dimensions (L / W / H) 370 / 200 / 190 cm weight ~ 3000 kg
Four-sided planer Ledinek 400/160/5 – Slovenian production – for wet wood – adjustable heads TECHNICAL PARAMETERS: planing width 400 mm planing height 160 mm spindle diameter 35 mm 1) bottom shaft 4 kW 2) upper shaft 5.5 kW 3) right head 4 kW 4) left head 4 kW 5) lower head 4 kW two feed speeds feed motor power 2.2 kW minimum material length 400 mm three upper toothed pulling shafts three upper smooth pulling rollers six upper pressure rollers pinion shaft pulling in the tabletop in front of the first head three auxiliary rollers in the top spigot diameter 5 x 110 mm machine dimensions (length / width / height) 310 / 180 / 170 cm weight ~2000 kg
Heavy four-sided combined calibration milling and planing machine Still in operation at Mayr Melnhof Holz Gaishorn GmbH / Gaishorn am See 182 / 8783 Gaishorn / Austria Available: End of 2022 Visit possible on request. Detailed technical description in the PDF document (as an attachment in the photo gallery).
Heavy four-sided combined calibration milling planing machine with additional scratch saw for relief grooves Still in operation at Franz Kirnbauer KG Hauptstrasse 2 AT-2630 Ternitz Detailed technical description in the PDF document (as an attachment in the photo gallery).
Heavy four-sided combined calibration milling machine with additional bottom horizontal profiling shaft Still in operation at Mayr Melnhof Holz Gaishorn GmbH / Gaishorn am See 182 / 8783 Gaishorn / Austria Available: first quarter 2022 Visit possible on request. Exact technical description in the PDF document (as an attachment in the photo gallery).
Heavy high-performance planer designed for maximum feed performance and productivity. Designed for rough use in planing and sawmills. Suitable for the processing of planed goods and slats. Special features: Left version. for wood widths up to 360 mm. Machine we sell as used. But the machine never ran. Electrical part still has to be built by Ledinek - here adjustments are possible (axe positioning, FU-s, 400V or 480V etc.). Price is for the variant in the PDF description. Adjustments on request. Drive motors available.
Multi-sided wide planing machine with chamfer unit LEDINEK SUPERLES 300 4V + 4F Planing width (min/max): 70 - 300 mm Planing height (min -max): 19 -300 mm Workpiece length (min): 2,000 mm Feed speeds: up to 230m/min Weight: 13.500 kg
- German production - universal head 360" TECHNICAL PARAMETERS: - planing width 230 mm - planing height 130 mm - spindle diameter 40 mm 1 bottom spindle 5.5 kW 2 right spindle 4 kW 3 left spindle 4 kW 4 top spindle 4 kW 5 universal spindle 4 kW electric height adjustment feed on cardan shafts two types of feed speed pre-table top length 2500 mm minimum element length 350 mm connection diameter 140 mm Machine dimensions 450x170x160 cm weight ~ 1400 kg
Planing width: 265 mm Planing height: 165 mm Dressing table length: 2000 mm Number of spindles: 5 pieces 1. Spindle: bottom/below 7.5 kW 2. Spindle: right/right 7.5 kW 3. Spindle: left/left together with right shaft 4. Spindle: top/top 5.5 kW 5. Spindle: Universal 5.5 kW Feed: 4 - 25 m/min Item description: Minimum workpiece length: 380 mm Planing width min.: 22 mm Chip depth max. 10 mm Speed of planing shafts: 6000 rpm Cutting circuit (4knives) diameter: 125 mm The vertical shafts are driven by a common 5.5 kW motor Planing shafts: TERSA Patent , Solid steel Central control panel with 2-axis positioning control 100 workpiece cross-sections can be stored Auto. Star Triangle Start-up Electric brake of the knife shafts, wear-free Auto. Feed shutdown in case of workpiece excess Motor circuit breaker and winding protection Collision protection of the left planing shaf ...
Planing width: 265 mm Planing height: 165 mm Dressing table length: 2000 mm + 1000 mm number of spindles: 7 pieces 1. spindle: down/below 7.5 kW 2. spindle: right/right 7.5 kW 3. spindle: left/left with right shaft 4. spindle: top/top 5,5 kW 5. spindle: top/top 5,5 kW 6 spindle: right/top 5,5 kW 7 spindle: Universal 5,5 kW Forward speed: 4-25 m / min Item description: Minimum workpiece length: 380 mm Planing width min.: 22 mm Depth of 10 mm The Planer shaft speed: 6000 RPM Cutting flight circle (4Messer) diameter: 125 mm The vertical shafts are driven by a common 5.5 kW motor Plane waves: TERSA patent, solid steel Centralized control panel with 2-axis positioning control 100 work piece cross-sections can be saved Autom. Star-Delta start Electric brake of the cutter shafts, wear-free Autom. Feed cut-off workpiece oversize Motor protection switch and coil protection ...
Four-side planer with 4 planing heads •Powerful with 4 motors Hsvwvkytm Voltage 400 V / 3 / 50 Hz Motor power 17,1 kW finished workpiece width 180 mm min. finished workpiece width 25 mm finished workpiece thickness 105 mm min. finished workpiece thickness 10 mm min. length of the workpiece - for single feed 350 mm - at group feed 250 mm Number of working spindles 4 Spindle speed 6000 min-1 Spindle diameter 40 mm Cutterhead diameter 120 mm Length of horizontal spindles 190 mm Length of vertical spindles 120 mm Feed speed 6; 12 m/min Diameter of feed rollers 120 mm Length of feed table 1700 mm Distance of the feed table from the floor 920 mm Quick adjustment of the feed table and ruler 10 mm Weight 1000 kg
Four-sided planer Paolini Master 23 Working width 230mm Working height 120mm Number of spindles 5 Spindle arrangement Bottom 7.5kw Right 7.5kw Left 7.5kw Top 9kw Universal 7.5kw Spindles adjustable in two planes Spindles fi 40mm Pulling rollers on pneumatics Feed rate adjustable on variator up to 35m/min CE Certificate Weight 3000kg
Order No. 6716 TECHNICAL DATA - max planing width 510mm - maximum planing height on both sides 190mm - maximum four-sided planing height 130mm from down: - guide rails - preliminary table, adjustable - smooth skid roller - 510mm planing shaft, 4-knife 5.5kW - 2 smooth, sliding shafts - adjustable rollers in the lower table top in advance: - pulling shaft, toothed - pressure - pulling shaft, toothed 2 pcs - pressure - 520mm planing shaft, 4-knife approximately 7.5kW - pressure - pulling shaft, smooth - pressure in the back: - side spindles 2 pieces - 1.right, vertical 130mm 4kW - 2nd left vertical 130mm 4kW - manual spindle feed - diameter of the spindles 40mm - adjustable spindles up / down, right / left - the axes are positioned alternately - side clamp 2 pcs - locking spindles - 2 types of feed speed + smooth about 3kW - diameter of the extraction conn ...
CATALOG NUMBER 6676 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 150mm 6 spindles: 1) horizontal lower 230mm 5.5kW 2) vertical right 150mm 7.5kW 3) vertical left 150mm 7.5kW 4) horizontal top 230mm 7.5kW 5) horizontal bottom 230mm 5.5kW 6) universal 230mm, adjustable at an angle of 360 ° 7.5kW - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - from above, 8 introducing, toothed, toothed rollers, including 2 double - 3 rollers leading out, pulling, rubber, smooth - 1 pressure from above - from the bottom, in the table, a roller introducing a toothed, pulling, torsion in front of the first spindle - 3 metal, smooth, pulling rollers at the bottom - 3 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulation of the feed speed on the inverter - 5.5kW feed mo ...
ORDER NO. 6573 TECHNICAL DATA - min / max workpiece width 20 / 230mm - min / max workpiece height 8 / 160mm - number of spindles 5: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal bottom 230mm 7,5kW - all heads adjustable up/down, right left - spindle diameter 40mm in advance: - 6 pulling introductory shafts, toothed including 1 double - 2 pulling lead shafts, rubber smooth bottom: - introductory shaft toothed, pulling, torsional in the lower table top in front of the first spindle - 2 pneumatic side clamps - pulling lead roller, metal, smooth - all pneumatically pressed rollers - length of the introductory table top 2180mm - table top adjustable up / down - central lubrication - electrical setting of planing thickness - lifting motor 1,1kW - smooth adjustment of t ...
Order No. 6754 TECHNICAL DATA - min / max width of the workpiece 20 / 230mm - min / max height of the workpiece 8 / 160mm 6 spindles: 1) horizontal lower 230mm7.5kW 2) vertical right 160mm5.5kW 3) vertical left 160mm 5.5kW - 3 spindle electrically adjustable front / rear 4) horizontal top 230mm 7.5kW - 4 spindle electrically adjustable up / down 5) horizontal top 230mm 5.5kW 6) horizontal bottom 230mm 5.5kW - all heads adjustable up / down, right left - diameter of the spindles 40mm in advance: - 6 introductory pulling, toothed rollers, including 2 double - 4 drawing rollers, smooth rubber from down: - input shaft, toothed, pulling, torsion in the lower table before the first spindle - pressure - 2 pneumatic side clamps - 2 smooth metal drawing rollers - all rollers are pressed pneumatically - length of the introductory top 2360mm - adjustable top / bottom top ...
– German production – year of manufacture 1990 – for wet wood TECHNICAL PARAMETERS: planing width max. 310 mm planing height on both sides 300 mm planing height four-sided 100 mm spindle diameter 30 mm shaft motor power 2 x 11 kW spindle motor power 2 x 7.5 kW feed speed 14-86 m/min feed speed adjustable on the variator four upper pulling shafts two lower pulling shafts four rollers in the auxiliary countertop brake minimum element length 600 mm machine dimensions (L/W/H) 290 / 170 / 210 cm weight ~ 3500 kg
High-performance industrial planing machine In good condition, lots of accessories '
szerokość robocza 220mm wysokość robocza 120mm 4 głowice średnica wrzecion 40mm płynna regulacja prędkości posuwu rozruch gwiazda/trójkąt regulacja głowic w dwóch osiach elektryczna regulacja belki dociskowej pneumayczne dociski rolek ciągnących obroty wrzecion 6000 obr./min
szerokość robocza 220mm wysokość robocza 120mm regulacja głowic w dwóch osiach średnica wrzecion 40mm układ głowic: dolna/prawa/lewa/górna/uniwersalna dociski sprężynowe rozruch gwiazda/trójkąt płynna regulacja prędkości posuwu
Four-sided planer SCM Compact 23 Maximum planing width 230mm Maximum planing height 130mm Spindle arrangement: Bottom 5.5kw Right 7.5kw Left Top 7.5kw Universal 5.5kw Smooth feed regulation on variator 4-22m/min All spindles adjustable vertically and horizontally Electric roller lifting Air roller clamps CE Certificate
working width 230mm working height 120mm 4 spindles spindle diameter 40mm pneumatic clamps of pulling rollers adjustment of heads in two axes infinitely variable feed speed start star/triangle electric adjustment of the upper head
