Manufacturer:
(Category: 1020)
Features: Proportional Control, Battery Status Indicator, Folding Handrails, Automatic Traction Control (ATC), 20 Amp Automatic SCR Charger, Extendable Battery Boxes, Motion Alarm, Horn, Hour Meter, Manual Lowering Cable, Platform Extension, Movable, Removable Platform Control, Console with Rail Mounting Bracket, Safety Cord Attachment Points, Lubrication-Free Scissor Arm Bushings, Scissor Arm Maintenance Support, Machine Attachment Points, forklift openings, side and rear lift, four 6V, 220 Ah deep cycle batteries, tilt alarm, onboard Diagnostics/Battery, charge status LEDs, Nonmarking tires solid cast steel rims, platform height (max.) 6.10 m, working height 8.10 m, platform capacity 360 kg, dimensions: stowed height - rails up 2.20 m, stowed height - rails down 1.82 m, transport length 2.30 m, minimum transport height 1.82 m, total width 0.76 m, wheelbase 1.88 m, ground clearance 0.09 ...
Equipped with: Genie GS series electric scissor lift with a working height of approximately 7.8 meters, platform height approximately 5.8 meters, lifting capacity approximately 227–363 kg, own weight approximately 1,300–1,500 kg, electric battery drive, solid non-marking tires, extendable work platform, length approximately 1.8 meters, width approximately 0.8 meters and height retracted approximately 2.0 meters. Auction-ID: A1-40139-261
Equipped with internal charger. Auction-ID: A1-40139-166
Demonstration model Features: Extendable platform Solid tires Documentation Transport height with railing folded: 194 cm Auction-ID: A1-40139-82
Office unit with storage space, WC, electric heater, 2 shutters. Highway shack. Auction-ID: A1-42018-168
Type: Vertical / articulated boom lift Make: Haulotte Model: Star 10-1 Year: 2007 Serial number: NIE105031 Working height: approx. 10 m Platform capacity: 200 kg Horizontal outreach: approx. 3 m Turret rotation: approx. 345° Drive: Electric Power supply: 24V Configuration: Compact vertical mast lift with articulated jib Application: Ideal for narrow spaces, maintenance, installation works Emission: Zero emissions – suitable for indoor use Remarks: Good overall condition, normal wear consistent with age and usage. Auction-ID: A7-46982-5
Equipped with: JLG 2033-E electric scissor lift, built in 1997, equipped with extendable work platform, non-marking tires and electric drive. Machine shows signs of wear commensurate with age and commitment. Type plate present, JLG, yype:2033-E, serial number: 0200028334, year of construction: 1997, drive: electric, working height: approx. 8 m, platform capacity: 340 kg, own weight: 1.790 kg, dimensions (approx.) length: 2.30 m, width: 0.84 m, height retracted: 2.00 m, platform height: approx. 6.00 m, working height: approx. 8.00 m, total weight: approx. 1.790 kg, platform length: 2.20 m, platform width: 0.80 m, extension deck: approx. 0.90 m, Total platform length extended: approx. 3.10 m Auction-ID: A1-40139-283
Machine type: Scissor lift (electric) Manufacturer: n/a Model: X8EN (visible marking) Year/Manufacturer: n/a Serial number: n/a Operating hours: n/a Technical data: Drive: Electric (battery powered) Battery: Lead-acid battery pack installed Equipment: - Scissor lifting platform - Safety guardrails - Solid rubber tires - Compact chassis Condition: - Used condition - Battery condition unknown Remarks: - Suitable for indoor and maintenance work - Compact size for narrow access areas Own mass: approx. 1,800 kg Auction-ID: A7-45990-52
Machine type: Scissor lift Manufacturer: Terex Aerials Model: TS26 Year of manufacture: 1998 Technical data: - Working platform type: scissor lift - Platform capacity: 400 kg - Max. persons: 3 - Machine weight: 2,210 kg Equipment: - Proportional drive control - Safety railings (used condition) - Solid tires Condition: - Used condition Remarks: - CE marked - Type plate available and readable - Suitable for indoor/outdoor lifting applications (subject to inspection) Own mass: 2,210 kg Auction-ID: A7-45990-26
Machine type: Single drum roller Manufacturer: ABG (Allgemeine Baumaschinen-Gesellschaft) Model: 169 AV Year of manufacture: 1990 Operating hours: not readable Technical data: - Operating weight: 7,700 kg - Permissible total weight: 8,500 kg - Axle load front: 3,600 kg - Axle load rear: 5,000 kg - Engine power: 51 kW - Engine speed: 2,300 rpm Equipment: - Closed operator cabin - Single smooth drum (front) - Rear pneumatic tires Condition: - Used condition - Visible corrosion and paint damage - Wear on drum and body panels Remarks: - vibration doesn't work - Manufacturer plate available - Deutz engine (label visible) Own mass: 7,700 kg Auction-ID: A7-45990-27
Not-workingMachine type: Tandem vibratory roller Manufacturer: HAMM (Wirtgen Group) Model: HD 70 Serial number: H1520786 Year of manufacture: 2011 Engine: Deutz BF4M 2011 diesel engine Engine power: 60 kW Operating weight: 7,265 kg Basic weight: 6,765 kg Max. weight: 9,900 kg Drum type: Double smooth drum Cab: Enclosed operator cabin Manufacturer location: Germany Remarks: - CE marked machine - Original HAMM identification plate available - Engine information plate visible (Deutz engine) - Operating hours reading approx. 5,566 h (analog meter) - Typical wear on drums and body consistent with age - Machine from Wirtgen Group production Auction-ID: A7-45990-8
Type: Vibratory tamping rammers / jumping jacks Manufacturer: ULBRO / Stone / mixed manufacturers Quantity: 4 pcs Engine type: Petrol engines Compaction system: Vibratory tamping foot Application: Soil, asphalt and trench compaction works Condition: Used condition with visible wear, corrosion and dirt deposits Remarks: Mixed models and manufacturers; sold as seen; functionality not tested Auction-ID: A7-45990-90
Machine type: Trench compactor / Padfoot roller Manufacturer: BOMAG Model: BMP 8500 Year of manufacture: 2016 Serial number: 101 720 11 3325 Engine: Kubota D1005 Technical data: Power: 14.5 kW Operating weight: 1,595 kg Equipment: - Padfoot drums (sheepsfoot) - Articulated steering - Hydrostatic drive - Remote control ready (not verified if included) - Protective engine cover Condition: - Used condition - Normal wear on drums and body Remarks: - Ideal for trench and soil compaction - Compact and maneuverable design - Suitable for construction and utility works Own mass: approx. 1,600 kg Auction-ID: A7-45990-34
Machine type: Tandem vibratory roller Manufacturer: DYNAPAC Model: CC224HF Year of manufacture: 2010 Product identification number: Y10000311C0A00474 Engine: Cummins QSB 3.3 Technical data: Power: 60 kW Operating weight: 8,120 kg Gross weight: 10,700 kg Max axle load (front/rear): 4,600 / 6,700 kg Equipment: - Double steel drum - Vibratory system - Open operator platform with canopy (ROPS) - Water spray system - Articulated steering - Lighting system Condition: - Used condition - Visible wear and corrosion on drums and body - Paint damage and surface rust - Interior intact with normal wear - Functional condition not tested Remarks: - NOT-working - Suitable for asphalt and soil compaction - Robust and reliable model - Made in Sweden Own mass: approx. 8,120 kg Auction-ID: A7-45990-35
Type: Vibratory tamping rammers / jumping jacks Manufacturer: ULBRO / mixed manufacturers Model: UB255 and similar Quantity: 4 pcs Engine type: Petrol engines Power: Approx. 3 kW each Year: 1998 (visible on one identification plate) Operating weight: Approx. 60 kg each Application: Soil and trench compaction works Condition: Used condition with visible wear, dirt and corrosion traces Remarks: Sold as seen; functionality not tested Auction-ID: A7-45990-89
Machine type: Tandem roller Manufacturer: Hamm (Wirtgen Group) Model: HD 8 VV Year/Manufacturer: 2006 Serial number: H11700279 (partially readable) Operating hours: n/a Technical data: Engine power: approx. 16 kW Operating weight: approx. 1,750 kg Engine: Hatz diesel engine Equipment: - Twin drum (tandem) vibration roller - Articulated steering - ROPS frame - Operator seat Condition: - Not-working Remarks: - Compact roller suitable for small compaction works - Ideal for pavements, trenches and landscaping Own mass: approx. 1,750 kg Dimensions (LxWxH): approx. 2,200 x 1,000 x 2,300 mm Auction-ID: A7-45990-49
Machine type: Tandem vibratory roller Manufacturer: HAMM (Wirtgen Group) Model: HD 10C VV Year/Manufacturer: 2006, HAMM AG – Germany Serial number: H1700209 (visible) Operating hours: n/a Engine: HATZ diesel engine Engine type: 1D / 1-cylinder diesel (visible plate) Power: 16 kW Weights: Operating weight: 1,575 kg Empty weight: 1,450 kg Max weight: 1,650 kg Axle load: Front: 800 kg Rear: 900 kg Equipment: - Double drum (tandem) vibration - Open operator station (ROPS frame) - Mechanical drive Condition: - Used condition - Visible wear, scratches and corrosion Remarks: - Compact roller for asphalt and soil compaction - Suitable for small construction sites and finishing works Own mass: approx. 1,575 kg Auction-ID: A7-45990-53
Machine type: Tandem roller Manufacturer: JCB Vibromax Model: VMT 390 Year of manufacture: 2008 Serial number: JCB 1701312 Technical data: Operating weight: 3,900 kg Engine power: 34.3 kW Engine: Kubota diesel engine (label visible) Equipment: - Twin smooth drums (front & rear) - Open operator station with ROPS frame - Hydrostatic drive Condition: - Used condition - Visible wear and surface rust on drums - Scratches and paint damage on body Remarks: - Compact tandem roller suitable for asphalt and soil compaction - Reliable Kubota engine Own mass: approx. 3,900 kg Auction-ID: A7-45990-43
For about 130 modules facing south with a 10 degree inclination. Consisting of: center and end clamps, connectors, SpeedPorter & DomePorter for ballasting, K2 Peak, replacement mats and windbreaker. Auction-ID: A1-46700-22
For about 150 modules facing south with a 10 degree inclination. Consisting of: center and end clamps, connectors, SpeedPorter & DomePorter for ballasting, K2 Peak, replacement mats and windbreaker. Auction-ID: A1-46700-24
For substructure in east-west orientation with 10 degrees inclination with a length of 2.45m. Consisting of: end and center clamps, Dome Peak for elevation, Dome and SpeedPorter for ballast distribution, connectors and replacement building protection mats. Auction-ID: A1-46700-25
Suitable for various K2 substructure systems (2.10m). Approx. 240 pieces. Auction-ID: A1-46700-18
attention! To participate in this auction, a deposit of € 25 is required, which will be withheld until the outcome of the contradictory verification of the state of the places and the prior deposition of safety documentation that can be consulted after the signing of an NDA. The deposit is to be paid by bank transfer to the current account in the name of Surplex Srl. To request further information: m.tosin@tbauctions.com Lot consisting of various construction equipment, including DEWALT hammer drill, HILTI hose, HILTI rotary hammer, various pallet trucks. The list drawn up by the expert is attached to this announcement. The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respec ...
1.000 € 
