Manufacturer:
(Category: 1020)
Machine defective - reason unknown Auction-ID: 04C-D48-1
Machine defective - reason unknown Auction-ID: 04C-D4N-1
For ITR hydraulic hammer; Auction-ID: A7-43908-47
Manufacturer: PFT – Putz- und Fördertechnik GmbH, Germany Model: G4 T2E Year of Make: 1995 Machine type: Feed and mixing pump for dry mortar, plaster, screed and fillers Application: Construction, interior and exterior plastering, renovation, renovation, screed laying Drive: Electric motor 400 V / 3~ / 50 Hz Motor power: approx. 1.35 kW Flow rate: approx. 20–25 litres per minute (depending on material and hose length) Conveying distance: up to 30 m horizontally / approx. 15 m vertically Delivery pressure: up to 30 bar Container volume: approx. 140 litres Net weight: approx. 250–280 kg Construction: robust steel construction, mobile, easy to disassemble for transport and cleaning Function: Continuous mixing of dry mortar or bagged goods with water and conveying via hose system to spray or plaster lances Areas of application: Processing of dry mortar, lime-cement plaster, lightweigh ...
Floating mulcher for mini-excavators, universal model for excavators from 12 to 75 quintals, equipped with pilot valve and floating knives. Never used, packed in its original packaging Overall dimensions: 1000 x 800 x 500 mm Weight: 130 kg Auction-ID: A7-43970-89
Equipped with: working height: 12.0 m, platform height: 10.0 m, platform capacity 700 kg, platform dimensions: approx. 4.18 m x 1.89 m (extended), travel speed: 6 km/h, slope capacity: 40%, diesel engine Hatz silentpack, transport length: 4.18 m, transport width: 2.25 m, transport height (rails up): 2.59 m, transport height (rails down): 1.71 m, operating weight: Approximately 5,510 kg - 5,640 kg, 4x4 (four-wheel drive), 2-wheel steering, foam filled tires for rough terrain, Support legs: Included for stability on uneven terrain, platform load management system and 2° tilt alarm. Auction-ID: A1-40128-108
Mini-excavator demolition hammer, ideal for JPC HT12-HT15-PC10 models, never used Overall dimensions: 1000 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-43970-107
Auction-ID: A1-43811-1701
Silenced demolition hammer for mini-excavators weighing from 1.5 to 4.5 tons, never used Overall dimensions: 1000 x 800 x 400 mm Weight: 140 kg Auction-ID: A7-43971-293
Hydraulic rotary grapple for wood, universal coupler, 800 mm opening for excavators from 700 to 2700 kg, never used Overall dimensions: 400 x 400 x 500 mm Weight: 45 kg Auction-ID: A7-43970-113
Not tested; Auction-ID: A7-43908-263
Machine Defective - Reason Unknown - Incomplete Auction-ID: 04C-D4M-1
The set includes 2 ramps Can be used open and folded Open load capacity: 250 kg per piece or 500 kg per pair Folded capacity: 1,100 kg per unit or 2,200 kg per pair Open length: 1830 mm Never used Overall dimensions: 1000 x 200 x 200 mm Weight: 10 kg Auction-ID: A7-43970-241
With new spare parts Auction-ID: A7-43908-44
Machine defective - reason unknown With battery Auction-ID: 04C-D49-1
Auction-ID: A3-40490-18173
Viewing by appointment Auction-ID: A1-40220-3
Floating flail mower for mini-excavators, universal model for excavators from 12 to 90 quintals, equipped with pilot valve and floating knives. Never used, packed in its original packaging Overall dimensions: 1100 x 800 x 500 mm Weight: 155 kg Auction-ID: A7-43971-46
Floating mulcher for mini-excavators, universal model for excavators from 12 to 75 quintals, equipped with pilot valve and floating knives. Never used, packed in its original packaging Overall dimensions: 1000 x 800 x 500 mm Weight: 130 kg Auction-ID: A7-43970-4
Equipment Type: Rototilt Model: S60 Attachment: Hydraulic quick coupler Compatibility: Excavator 14–19 t Auction-ID: A1-43658-56
800 mm bucket for JPC excavators (except HT25 mm), Ø25 mm coupler, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-43971-420
Auction-ID: A1-43658-55
This is a Power Tower Nano. Used as a compact, electric working height solution for indoor work: safe working at heights where a ladder is no longer allowed, but a scissor lift is too big - tested and functional - Typical applications: Installation & technology • Replacing lamps and fixtures • Cable trays, sensors, cameras, sprinklers • Light maintenance on ceilings Facility & maintenance • Painting and repair work • Install/replace ceiling tiles • Maintenance in offices, schools, hospitals Retail & warehouses • Lighting in stores • Hanging billboards / signage • Light warehouse maintenance (no heavy loads) Auction-ID: A3-40490-10750
Kit consisting of 2 buckets for excavators: digging bucket 200 mm + flattening bucket 800 mm, Ø25 mm hitch for all jpc excavators from mod ht12 up to mod ht20 Overall dimensions: 1200 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-43971-393
Lot consisting of JPC excavator attachments (except HT25), never used: - hydraulic breaker - 200 mm bucket - 800 mm bucket Ø25 mm connection Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-43970-389
Maximum ride height 10.06 m, lifting/lowering time approx. 38/42 s, speed 4.8 km/h, gradeability 35 % Auction-ID: A1-44095-10
Universal quick release kit with Ø25 mm attachment, compatible with all JPC excavators (except HT25), kit consisting of quick coupler, 200 bucket and 800 bucket, never used Overall dimensions: 1200 x 800 x 500 mm Weight: 90 kg Auction-ID: A7-43970-99
Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-43970-9
Not tested; Auction-ID: A7-43908-245
Platform height: 9.70m, working height: 11.75m. Equipped with 48V battery pack and Hatz 1B30 diesel engine. Equipped with non-marking tires. Internal charger Platform extendable 1.5m. Wheelbase 2.04m. Auction-ID: A1-41986-104
Surplex GmbH
250 € 