прочие строительные машины подержанные на продажу (768)

Office container 20 feet - co01312 - approx. 6058 x 2438 x 2600mm LxWxH - Spare parts carrier, defective: The container is badly worn and has functional or structural damage that requires repairs. Auction-ID: A1-46973-501

total wight:200 kg

Technische Highlights auf einen Blick:• Motor: Cummins QSF3.8T, Turbo, wassergekühlt, Euro V• Leistung: 90 kW (122 PS) bei 2200 U/min• Einsatzgewicht: 14.620 kg• Schaufelvolumen: 0,6 m³ (Rücklöffel)• Grabkraft: 97 kN (Schaufel) / 70 kN (Arm)• Max. Grabtiefe: 5.490 mm• Max. Arbeitshöhe: 8.495 mm• Fahrgeschwindigkeit: 3,2 / 5,4 km/h• Steigfähigkeit: 70 % (35°)• Kraftstofftank: 265 Liter• Hydrauliksystem: 2x130 L/min Förderleistun

Features: 0.91m extendable platform, fold-down handrails, self-closing gate, removable platform console box, lanyard attachment points, fully proportional joystick control with integrated thumb switch, proportional lift/lower speed control, joystick for lifting and traveling, load detection system, two speed settings, direct electric drive on two wheels, 8 x 6V 370 A/hr deep cycle batteries, automatic traction control, automatic 20 amp battery charger, automatic rear wheel brakes, alarm and indicator light in case of tip-over, steel scissor guards, oscillating rear axle, lift/lashing eyes, lubrication-free scissor arm bushings, scissor maintenance support, Ground control selector, key lock, battery status indicator, hour meter, horn, manual lowering cable, Non-Marking tires, working height 14.19 m, platform height – raised 12.19 m, folded height 2.80 m, platform handrail height 1.10 m ...

Little used, Built-in on charger Auction-ID: A3-43535-314

Machine Specifications Wirtgen SP1500 - Base Paver - Year of Manufacture: 2007 - Operating Hours: 9,764 h Wirtgen SP1500 - Top Paver - Year of Manufacture: 2007 - Operating Hours: 10,219 h Wirtgen TCM 1800 - Texture Curing Machine - Year of Manufacture: 2007 - Operating Hours: 8,736 h Find more here - / Contact us at -

This professional Aichi SV06E1NS from the year 2018 is in good condition and has good batteries. It is immediately ready for your next job. With a narrow clearance of just 0.81 metres, you can manoeuvre this machine effortlessly through standard doorways and in tight spaces. The streak-free (non-marking) belts ensure that the floor on the job site remains perfectly clean. Moreover, this aerial platform is officially approved for both indoor and outdoor use (up to wind force 6) - Brand / Model: Aichi SV06E1NS (Skytower), Year of construction: 2018, Maximum working height: approx. 7.80 meters (Platform height: 5.80 meters), Lifting capacity: 230 kg (allowed for 2 people + tools), Own weight: 1,540 kg, Drive: 24V Electric (completely emission-free), Tires: Non-marking (streak-free white) - Extendable platform: Manual platform extension for extra reach and workspace. Proportional steering: V ...

Renault Maxity boom lift truck + Isoli PNT205 articulated telescopic boom lift – 20 m – 2016 – CT OK Boom lift truck mounted on a Renault Maxity chassis, equipped with an Isoli PNT205 NH telescopic and articulated boom lift, offering a working height of about 20 metres. Ideal configuration for difficult access thanks to the telescopic + articulated combination allowing excellent obstacle avoidance. Last Used Vehicle: Brand : Renault Model: Maxity Year of first registration: 2016 Engine : Diesel Displacement : 2488 cc Power: 90 kW EURO standard: Euro 5b Mileage: 95.452 km (confirmed) Transmission: Manual Number of seats: 2 (see note) ️ Carrycot: Brand: Isoli Model: PNT205 NH Type: Telescopic and articulated Year: 2016 Working height: ± 20 m Side Reach: ± 9.4 m Basket capacity: 230 kg Operating hours: ± 3,200 hours Capacity: 2 people Cart and Floor Controls Turret Rotation Sta ...

Model: CASE Vibromax 1102 Operating Hours: 13308 h Approximate Own Mass: 11,000 kg Approximate Dimensions (L×W×H): 5,200 × 2,250 × 3,000 mm Auction-ID: A7-45990-29

max load 200kg; nb persons max 2; incl battery Hawker 48v Auction-ID: A7-45993-192

Machine type: Tandem vibratory roller Manufacturer: HAMM (Wirtgen Group) Model: HD 75K Year/Manufacturer: n/a, HAMM AG – Germany Serial number: 50.584 (visible) Operating hours: approx. 4,239 h (visible) Engine power: 50.2 kW Weights: Basic weight: 6,650 kg Operating weight: 7,650 kg Max weight: 8,300 kg Equipment: - Tandem steel drums - Vibration system - Enclosed operator cabin - Lighting system - Emergency stop Condition: - Used condition - Visible wear, paint damage and corrosion Remarks: - Suitable for asphalt and soil compaction - Mid-size roller for road construction applications Own mass: approx. 7,650 kg Auction-ID: A7-45990-54

Алюминиевая лестница с эстакадой WÜRTH 2x8 ступеней, как новая,

Одноразовые поддоны и сломанная древесина — примерно 30 поддоно�

Очиститель поверхностей высокого давления VEVOR Turbo Devil 410, 3 вращающихся ролика, пыльный, оптически хорошее состояни�

Влажный/сухой пылесос WÜRTH ISS 50-L Automatic, SN: 962241860170182526, 1380 ватт, контейнер 50L, пыль класса L, год постройки: 20021, приобретён в 2021 году за 858,40 евро нетто, BW 31.05.23 585,- EUR нетт�

Контейнер для сбора использованных батарей, заполнен, 3 детал�

ОБОРУДОВАНИЕ ДЛЯ СПЕЦИАЛЬНЫХ РАБОТ Гусеничная буровая установка Atlas Copco A-66 CLL с центральным пятым колесом на шасси гусеничного двигателя, насос Пенящий агент, двойной хомут 310 с гидравлическим поршневым тягом 20 тонн, мачта с полезным ходом 12,00 м, крутящий момент 1300 кгм, 6-цилиндровый дизельный двигатель Deutz. 106 л.с. Смесительной установке Cuoghi LTW на слайде, производство до 30 мк/ч, включает бункер с масштабом для дозирования порошка, шнеком для загрузки, скоростным миксером на 1 мк и меш� ...

Смесивший завод Cuoghi LTW на затворе, производство до 30 м/ч, включающий бункер с весом для дозирования порошка, шнек для загрузки, высокоскоростной смеситель ёмкостью 1,0 мк, мешалка 2,5 мк, вертикальный инжектор с регулируемым расходом максимум 120 л/мин и регулируемым давлением максимум 120 бар, воздушная система с компрессором объёмом 200 л и моторизованными пневматическими клапанами, Контрольная кабина.

Auction-ID: A1-40138-206

The SHANTUI LE60 is a used, fully electric wheel loader suitable for heavy construction tasks, with a robust operational weight of 20 tons. It is powered by a 357 kWh lithium-ion battery, featuring liquid cooling and rated at 537.6 V / 664 Ah. This allows for up to 6–10 hours of usage, with a charge time from 20% to 95% taking approximately 1.25 hours when using a 240 kW charger. Equipped with a 100 kW driving motor capable of a maximum of 200 kW and an 80 kW working motor that peaks at 160 kW, this loader offers impressive torque for demanding tasks. The transmission is an electronically controlled gear system, supported by self-locking differential axles. With a maximum speed of 38 km/h, it efficiently handles operational demands, boasting a lift capacity of 6,000 kg. The hydraulics system delivers a flow rate of 112 l/min, ensuring fast and reliable performance with full cycle times ...

Auction-ID: A1-40138-215

For about 160 modules facing south with a 10 degree inclination. Consisting of: center and end clamps, connectors, SpeedPorter & DomePorter for ballasting, K2 Peak, replacement mats and windbreaker. Auction-ID: A1-46700-23

Компрессорная система BOGE SC 10 Bj., предположительно 2001, Masch.-No 395262/01, последнее техническое обслуживание 21.12, 10 700 часов работы, без зажима, с котлом OKS примерно 500 л, построен в 2001 год�

Can go up to 22 m in height. In working order. Auction-ID: A3-43528-6001

Auction-ID: A1-46694-2623

Сталь для тачки, оцинкованный жело�

Тяговая тележка стального цвета синего цвета примерно 80x160 с�

Двойная шлифовальная машина на кронштейне стены 230 �