We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 1020)
used
; Gross weight [kg]: 6650; Accessories: 20FT Unused Genset Container
used
; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container
used
Inside dimensions: 1182022002650 (LWH in mm); Registration Number: 1; Accessories: 40FT HC Brand New Genset Container
used
; Gross weight [kg]: 35; Registration Number: 1
used
; Gross weight [kg]: 2250; Registration Number: 2
used
AC400V-2000kW Automatic Load Bank, , Rated Voltage: 3P4W 400VAC 50/60Hz, Power Supply: External 3P5W 400VAC 50 Hz, Rated Power: 2.000 kW, Duty Cycle: Continuous, Cooling type: Forced Air Cooling (Horizontal inlet air and upwards exhaust cooling) , , Load Steps @400V: 1, 2, 2, 5, 10, 10, 20, 50, 100, 200, 200, 200, 200, 200, 200, 200, 200, 200kW, total 2000kW, Note: when voltage is less than 400V, power will derate according to Ohm’s Law., , Wire Connection: , - Load bank input—busbar, - Control power input—terminal block, Communication Interface: RS232/RS485 - Control part IP54; Gross weight [kg]: 10000; Registration Number: 1; Accessories: Remote controller: , Dimensions case: ± 492x395x216MM , weight case: ± 10 kg
used
used
; Gross weight [kg]: 917; Registration Number: 1
used
used
; Accessories: Options:, , - DPX-28051 = Socket box: 2x 32A - 2x 16A 3P, - DPX-28052 = Socket box: 63A - 32A - 2X 16A 3P, - DPX-28053 = Socket box: 2x 32A - 2x Schucko 230V, - DPX-28054 = Socket box: 63A - 32A - 16A 5P - 2x 16A 3P, - DPX-28055 = Socket box: 125A- 63A -
used
Used tank, Capacity:1000 Liter, 2 identical units available; Gross weight [kg]: 150; Registration Number: 2
used
used
Automatic Transfer Switch - ATS Panel - ATI Panel, 1000 Ampere - Applicable for generators up to 675 kVA; Gross weight [kg]: 180; Registration Number: 1
used
Automatic Transfer Switch - ATS Panel - ATI Panel, 100 Ampere - Applicable for generators up to 65 kVA; Gross weight [kg]: 50; Registration Number: 1
used
Automatic Transfer Switch - ATS Panel - ATI Panel, 1250 Ampere - Applicable for generators up to 865 kVA; Gross weight [kg]: 180; Registration Number: 2
used
Caterpillar C15 - Unused - 475 HP - MCW
used
used
used
used
used
used
used
Caterpillar C13 - Unused - 440 HP - RRA
used
Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 97 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c4-4-w23-46131 70-new/42380, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 615 kg, Type number: C4.4 W23-4613170
used
Engine Brand: VOLVO PENTA, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 185 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/volvo-penta-tad881ve-new/4 5888, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.030 kg, Type number: TAD881VE
used
Manufacturer: Epiroc Model: FlexiRoc D65 Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2019 - Total engine hours: 29,346 - Engine replaced | Hours on new engine: 10,288 - Drilling hours: 10,523 UNIT 2 - Year of manufacture: 2020 - Total engine hours: 26,274 - Engine replaced | Hours on new engine: 8,967 - Drilling hours: 10,000 UNIT 3 - Year of manufacture: 2020 - Total engine hours: 25,005 - Engine replaced | Hours on new engine: approx. 6,500 - Drilling hours: 9,372 Find more here - / Contact us at -
used
Manufacturer: Sandvik Model: Leopard DI650i Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2020 - Total engine hours: 19,041 - Engine replaced | Hours on new engine: 7,700 - Drilling hours: 7,355 UNIT 2 - Year of manufacture: 2021 - Total engine hours: 18,608 - Engine replaced | Hours on new engine: approx. 5,422 - Drilling hours: 7,443 Technical Details : - Drilling method: Down-The-Hole (DTH) - Hole diameter range: 115 to 229 mm (4.5 to 9.0 in.) - DTH hammer: Sandvik RH570 (4, 5 and 6 in.) - Flushing air capacity: 28.3 m3/min at 24 bar - Drill rod/tube diameter: 89, 102, 114, 127 and 140 mm (3.5, 4, 4.5, 5 and 5.5 in.) - Rotary head: MRH6 - Engine type: Caterpillar C15 (Tier 3 / Stage 5, Tier 4F) - Engine output power: 403 kW at 1,800 rpm - Cabin: iCab - Production capacity: 2.1 Mt/a (one shift) - Transport height: 3.5 m (11.5 ft) - Weight: 25,100 kg (55 ...
used
Technische Highlights auf einen Blick:• Motor: Cummins QSF3.8T, Turbo, wassergekühlt, Euro V• Leistung: 90 kW (122 PS) bei 2200 U/min• Einsatzgewicht: 14.620 kg• Schaufelvolumen: 0,6 m³ (Rücklöffel)• Grabkraft: 97 kN (Schaufel) / 70 kN (Arm)• Max. Grabtiefe: 5.490 mm• Max. Arbeitshöhe: 8.495 mm• Fahrgeschwindigkeit: 3,2 / 5,4 km/h• Steigfähigkeit: 70 % (35°)• Kraftstofftank: 265 Liter• Hydrauliksystem: 2x130 L/min Förderleistun
used
Machine Specifications Wirtgen SP1500 - Base Paver - Year of Manufacture: 2007 - Operating Hours: 9,764 h Wirtgen SP1500 - Top Paver - Year of Manufacture: 2007 - Operating Hours: 10,219 h Wirtgen TCM 1800 - Texture Curing Machine - Year of Manufacture: 2007 - Operating Hours: 8,736 h Find more here - / Contact us at -
used
EQUIPMENT FOR SPECIAL WORKS Atlas Copco A-66 CLL crawler drilling rig with center fifth wheel on crawler undercarriage, pump foaming agent, double clamp Ø 310 with hydraulic piston puller 20 ton, mast with useful stroke 12.00 m, torque 1300 kgm, 6 cyl Deutz diesel engine. 106 HP Cuoghi LTW mixing plant on slide, production up to 30 mc/h, consisting of hopper with scale for powder dosing, loading auger, 1 mc high-speed mixer, agitator 2.5 cubic meters, vertical injector adjustable flow rate max 120 lt/min and adjustable pressure max 120 bar, air system with 200 L compressor and motorized pneumatic valves, control cabin. Clivio MP/OL 2 electric injector with Ø 50 mm pistons, adjustable flow rate max 50 lt/min and pressure adjustable max 120 bar Soil-Mec SMT turbomixer 285 lt N. 2 Soil-Mec SMA 450 Lt mixers Two-stage electric plastering machine 220 V ...